Jump to content

Recommended Posts

Posted (edited)

Please post about this recall in this thread. This topic is pinned to the top. The original thread is given below.

 

No need for multiple topics on this

 

 

By John Goreham

 

Link to original post in the Newsroom section

 

 

 

 

 

 

 

John Goreham
Contributing Writer, GM-Trucks.com
8-7-2017

Back when electronic, or electric, steering replaced hydraulic assist, many drivers worried that if the electric motor that adds the power steering input was suddenly disabled the vehicle would lose control. Manufacturers poo-pood safety concerns, calling the new systems "fail-safe." Today, GM has announced a huge recall of about three-quarters of a million 2014 model year Silverado and SIerra pickups because the electronic steering may fail and the driver may lose steering control, possibly leading to a crash.

- Background on GM electric power steering here.

 

The NHTSA recall website explains the problem, saying, "The vehicles may have a temporary loss of electric power steering (EPS) assist, especially during low-speed turning maneuvers." The result is explained as well, as, "If EPS assist is lost and then returns, the driver might lose temporary control of the steering wheel, increasing the risk of a crash."

 

GM will follow the law and notify all owners of the problem by snail mail. However, like all manufacturers, GM has a recall lookup website. You can access it here. The plan is for GM dealers to simply update software. There is no mechanical problem according to the information provided.

- Please, check out one of members' excellent background story on this topic in the comments below. Thanks 97 Sierra SLT!

Edited by txab
Posted

97SierraSLT:

 

 

Back in 99' when I first bought my 97' K1500, there were thousands of complaints on the NHTSA website regarding this erratic "jerking" of the steering wheel. GM introduced this particular electronic VSS system (variable speed steering) in 1997. This VSS system was used in the C/K series trucks as well as full size vans for certain and other GM makes/models. There was not one recall or TSB issued. GM must have paid off NHTSA handsomely to bury this as it would have affected millions of vehicles.

There is a steering column mounted potentiometer that feeds an input signal to the ECM to indicate steering wheel position and an ECM controlled solenoid valve on the back of the power steering pump that will increase/decrease line pressure to the power steering box. The principle is at slow speed, the ECM allows for you to easily turn the steering wheel. As vehicle speed increases, it takes more effort to turn the steering wheel.

I spent years figuring out how to remedy this erratic jerking of the steering wheel without trying to break the bank. I ended up taking the potentiometer off the steering column and taping it to the 12 o'clock position so it could no longer rotate. In essence, I was tricking the ECM into thinking I was always driving in a straight line. This helped as the frequency of the erratic jerk in the steering wheel was decreased, but it did not completely solve the problem.

The next step was to see if I could retrofit a power steering pump and power steering gear box out of a 1996 model C/K1500 into my 1997, thus completely bypassing the VSS system. I couldn't justify the expense and knowing for certain it would work as GM changed the steering geometry in 1997.

I owned this truck for 16 miserable years and would not let anyone drive it as it was far too dangerous. This POS was a true rolling death trap. When I eventually sold it, I told the new owner about this erratic VSS system and made him sign a release of liability waiver before handing over the pink slip.

 

Posted

I just called my dealer and the service dept said the remedy isnt available yet and that they will notify owners once its available.

Posted

I have had this happen 3 times while in reverse. mine has actually shut the truck off while in reverse. i live on a very busy road and always back into my drive. i have been thankful that all 3 times that i haven't gotten run into when it happened. looking forward to the fix.

Posted

I just bought my 2014 Sierra and have noticed this "glitch" and wasn't really sure what was happening. It happened as I was coming up to my drive that's in the middle of a mild hill. I would pull just past the driveway and reverse into the driveway. As I started turning the steering wheel I felt a jerking a sudden loss of steering and then a drop in RPM's followed by the steering wheeling jerking again and the steering wheel regaining control. I wasn't in any danger but was definitely taken by surprise. I called the GMC dealer I bought the truck from and they just told me if I had heard any strange noises or seen any fluid stains beneath where I park my truck? I said no. I felt like they were not being honest and that they did not answer my questions at all. Hopefully this recall would help resolve this issue.

Posted

I just called my dealer and the service dept said the remedy isnt available yet and that they will notify owners once its available.

Fix sure is available. Have done a half dozen this week.

  • Like 2
Posted

What's the fix? Hard to believe a software update will fix everyone's problem. Especially since some changes were made after the 2014 year to remedy electrical issues. If GM knew about a problem that could affect everyone's steering and the fix was just a software update, they should've already done it.

  • Like 1
Posted

I recently purchased my 2014 Silverado and it was on hold from the dealer until the recall was completed. After I purchased the truck they held it for about a week and a half. They told me the repair took around 30 minutes to do.

Posted

Never had a problem with my steering over the last 3 years of ownership but taking it in tomorrow to get the software update.

Posted

7939b5ed3402f0135a4b9bf9ad221a98.jpg

 

Just got the notice today.

 

 

Sent from my iPhone using Tapatalk

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • I agree with Tim.  As tech heavy as engines are these days, no way I’d be an early buyer of the new 6.6.  Of course, I bought my ‘26 Denali w/the 6.2 after dumping my Tundra with it’s defective 3.5 liter imploding engine disaster, so I’m a little gun-shy.  That said, my 6.2 has been rock solid.  I don’t drive it like I do my BMW Z4 M40i, but I don’t baby it either.  I got a V8 for a reason.  But I’m averaging 18 around town and 22 highway.  I have seen 24 highway as well when I wasn’t loaded up heavy.  Considering my Tundra with the twin turbo V6 only got 14.5 in town and 17 on the road, I’ll take the 6.2 all day, every day.  If I were you, I’d grab a ‘26 while you can.  Inventories are probably gonna start dropping and I’ll bet the deals will start looking sweeter as well.
    • I am curious if anyone has figured out a way to add an hard button AUX or 360 Camera switch to the center row of switches. I have a 2021 AT4, and want to split the hill decent button and add a 360 camera button so that you don't have to go into the center display and locate the camera functionality, etc...   My father's 2024 Yukon XL AT4 and it has a hard button, see below. I found this thread on the Yukons, but it seems like there may not be a part number for the 2021 sierras. https://www.gm-trucks.com/forums/topic/255339-adding-hard-button-for-camera-on-2021/ Anyone else figured this out. Seems like it would need to be a custom switch!   I am getting ready to install the auto stop/start eliminator, so would be nice to knock them out at once.     Upvote1Downvote0Go to comments
    • Looks like the entire state is burning. 😬
    • Through the years it hasn't been my typical method as I tried to drop oil on an engine that was hot from having been worked, however that was not always practical and had to fire up a unit and let it warm up reasonably well and drop the oil when I had the time to do it but am referring to not only vehicles but a variety of farm equipment and highway tractors etc. However on a vehicle where one is crawling under it and the exhaust is nearby to ones body and if wanting to pull the plug without danger of being hit with boiling hot oil or attempting to remove a HOT oil filter, its sure safer and easier to not have everything smoking hot and can remove the filter right away when under the vehicle and let it all drain. Of course its not the end of the world if a bit of oil stays in the engine that might have eventually found its way out, I like to get out as much as possible but any oil changes that take place in shops would rarely be sitting around for very long at all before the plug is thrown back in and filter slapped on and oil poured in and sent out the door quick like. There would be very little time spent ( assuming they even did it ) in starting the engine with oil to fill the filter, then waiting to verify the level on the stick. A good reason to check ones oil level shortly after a shop changed the oil on a vehicle just to make sure its correct and to look under for any oil around the drain plug or filter. 
    • Cool to see another Vermonter!
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...