Jump to content

Recommended Posts

Posted
On 8/19/2018 at 8:36 PM, SILVER SLED said:

Dee Lete Dee Lete Dee Lete

No tunes available to do so on the L5P.

Posted
16 hours ago, redwngr said:

No tunes available to do so on the L5P.

The truck in question is a 2015 with an LML.  LML's can easily have the DEF system deleted.  

  • 3 months later...
Posted (edited)

Just came across an article that was published in the last couple of days where the EPA is now cracking down on those who are deleting emissions on diesels.  $4600 fine per occurrence.  $46,000 per occurrence by a shop.  The parent company of Bully Dog got whacked for 6.5 million dollar fine.   Might be just the EPA making an example of some to make others color within the lines, but one has to ask if they want to put their back end out there for the EPA to whack it.  

 

I understand why one would want to.  I am for eliminating the stuff.  But keep in mind, the EPA is looking to increase their bank account and they have turned their eye to these things long enough.   it would not surprise me if they strong arm shops into reporting of vehicles where the emissions stuff has been monkeyed with.  A real can of worms if there ever was one.

 

It would seem the best method to address the problem, with the least exposure to a problem, is eliminating the operation of some of this stuff via ECM software programming.  Still a risk, but if all the stuff is still on the vehicle, it is not as easy of a target.

Edited by Cowpie
  • 8 months later...
Posted

My 2012 Chevrolet Diesel Silverado Truck 136,000 miles engine light and warning light for exhaust fluid issue.  Dealer says tank and heater part cost $300.  Total cost for job could run $1000.  Waiting for truck now.  Put in shop yesterday and won’t be ready until tomorrow.  Says guarantee for 2 years.  Had def injector replaced in October of last year and that costs $600.  Def sucks and should have recalls

  • 1 month later...
Posted

I was wondering if i can still drive my truck if engine light is on about def redundant heater plz let me know

Posted

My truck is 2016 gmc 3500 serria denali. Any advice? I could really use some about the def redundant tank heater issues

  • 4 months later...
Posted

I have a 2016 Chevy 2500HD and had this issue at 43,000 miles. Dealer replaced it and I am glad it was covered by warranty. Have not driven it much since then. 

  • 2 weeks later...
Posted

I have a 2016 3500 and had the check engine light come on last week.  In the dealer right now posting this, as they're replacing the DEF heater. 44,433 miles

Posted

Not surprised.  DEF heater has been a pretty common failure on the LMLs.  Had mine replaced twice on my 2012. 

  • 1 month later...
Posted

Also have the 2015 LML.  I see where a lot of peoples trucks went into Limp mode once they got the P21DD code.  I never did. Drove it 1,000 miles and no limp mode.  But I changed the DEF heater myself and the code is still there.  So what could the problem be if it's not the DEF heater?  I know if I take it to the dealer they will try and get me to pay for another DEF heater. So I'm trying to avoid that.  Any ideas?

  • 1 year later...
Posted

Had my Def Tank Heater replaced last year under warranty. They gave me a 100000 mile extended on it. Def is highly corrosive.

They have to remove the tank and install waited 2hrs.

  • 4 months later...
Posted

I have a 2021 duramax 3500 with 11,000 miles. Having the same problem. Dealership called and can't get parts, so they are hoping to have it fixed some time in June. My truck is a sitting duck and I have to still make a payment on something I can't drive. I had to purchase another vehicle just to go to work. This is beyond frustrating to say the least... I just want to sell it! 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • I don't wanna do major surgery/upgrades, behind-the-dash work, add amps, change radio etc. on my '26 std cab WT. On the WT, it has the base 7" IOR infotainment setup, and only two speakers (doors). Since I listen to classical, looked around for speakers that do well and dug thru reviews. Two-way speakers were found to be better than 3-way. So I've ordered a pair of  Infinity Reference REF-9632IX 2 way speakers.  [These may  or may not have been discontinued / succeeded by the 3-way ...9633 ones.]    These speakers are lauded for 3 ohm and 94db sensitivity spec so they'll work well for ordinary base car radios without amps and offer better performance (quality,  strength) than  default base paper-cone speakers. They'll be installed in a few days and I'll let y'all know what I think. Bill W San Jose      
    • Thanks!   Changed out the rear shocks today to Bilstein 5100s.  So far feel much better. The stock Rancho were wore out.  Lots of heavy hauling (2 moves, home renovations, etc).  Next up is new BFG tires Monday.  Cant wait the current tires have little to no wet traction and are super loud (hum)    
    • Ok, I got the all the codes. What do you all think would be a place to start?
    • How about I just point to the factory pans stand pipe little drain plug and claim its a pan with a real drain plug !. I just couldn't swallow the fact that a Dorman pan which at this point is probably the only pan out there that fits the gas version truck cost that much up here in Canada so I decided initially anyway to skip it and see what I thought of pulling the pan method and down the road if I felt inclined enough then I would either install a drain plug kit in the factory pan if there is enough room for it, or have a bung welded onto it, or put an aftermarket pan on. The thing is if the pan is not pulled then the magnets in the pan can't be inspected and cleaned or if wanting to change out the filter. However of course it certainly would make the job easier to be able to drop the oil first before having to handle the pan if dropping the pan that go around was the goal.    I knew a guy locally that was doing custom field spraying years ago with a pickup pulling a ground driven sprayer, I believe it was a GM pickup with an automatic trans. He had a drain plug in his pan and would drop the oil out of it once a week and top it back up through the dipstick tube to keep refreshing a portion of the oil often and that made the transmission last far longer than had he done nothing. Soft fields pulling 500 gallons of water at the start of each mixed up sprayer tank batch and in low range sucking along. I imagine he got some tips from other custom sprayer outfits doing the same thing at the time and learning from their blown up tranny mistakes. Transmissions then had no lock up converter so would cook the crap out of the fluid slipping that much and it would not have been synthetic fluid either. 
    • 3.39 Kroger’s in Montgomery Texas. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...