Jump to content

Recommended Posts

Posted

What's everyone using?  I'm trying to help eliminate the water spots after washing. 

Posted

Water at my house is silly hard, over 40 grains, and water spotting so bad I refused to hand wash at home. Then I was introduced to Rain-X spot free wash. Outside water is hard but the house has a softener. I fill the bucket from inside for the wipe down and add an ounce or so of the Rain-X to the water. Use a medium nap microfiber and give it a full wipe down wringing the rag outside the bucket rinsing the rag between wipes. Zero spotting. Shade of course and don't let the panels dry until you want them so.  

Posted

Keep it waxed I use my back pack blower to remove 95% of the water

Posted

i've been checking out the CG ones. But i think any of the detailing ones are going to do the job.  unfortunately, it seems that i always get spots even when doing the leaf blower.  while i'm doing one side, the other side starts to dry.  i'm running out of warm days here, so i washed and rinsed off, then went for a drive immediately after.  still ended up with some spots.  

 

i'm in the process of having to go back with quick detailer to get rid of them, then putting on some jet sealer. 

Posted

Try The Rag Company's "Dry Me A River".  They actually work better a little damp.  You don't rub the vehicle with them -- you lay the towel on the vehicle and "blot" it to pick up the water.

Posted

As mentioned “The Rag Company” for any type of vehicle towel.

 

as for the water spots, how hard is the water in your area? I was renting a house and the hard water was around 350ppm. The house I bought across town, the water is 100ppm. You may need a water deionizer system. 

Posted

For what its worth I have always just bought the large green microfiber drying towels from Walmart, they have worked just as well as the CG microfiber towels for a fraction of the price, I use CG MR.PINK soap which I have been very happy with. 

Posted
9 hours ago, SirenRed16 said:

What soap are you using to wash the truck?

Sent from my SAMSUNG-SM-N920A using Tapatalk
 

I want to say it was some Turtle Wax gold class that I could get to.   But i've experienced the same issue with meguiar's gold class as well.   

 

I think it's mainly the fact that the sun will start to dry the water before i have time to get to it all. 

Posted
I want to say it was some Turtle Wax gold class that I could get to.   But i've experienced the same issue with meguiar's gold class as well.   
 
I think it's mainly the fact that the sun will start to dry the water before i have time to get to it all. 
I was using turtle wax (bright green one) and was getting the same water spots. Moved to Chemical Guys Honeydew soap and drying it in the shade and no more water spots.

Sent from my SAMSUNG-SM-N920A using Tapatalk

Posted
21 minutes ago, SirenRed16 said:

I was using turtle wax (bright green one) and was getting the same water spots. Moved to Chemical Guys Honeydew soap and drying it in the shade and no more water spots.

Sent from my SAMSUNG-SM-N920A using Tapatalk
 

I'll try a couple different soaps to see what I get.    

 

I will say that Jet Seal stuff is awesome.  

Archived

This topic is now archived and is closed to further replies.

  • Latest Articles

  • Posts

    • Its no wonder you've gravitated to the oil types and brands you have in later years after trying certain brands and one being a specialty oil or at least very hard to come by up here and the other would have been a commonly found oil of the era and the vastly different outcomes as a result to using the vehicles in question the same distance for an OCI . It shows what marketing hype can do without actually having the product to back up the claims and that is no different now with the insane claims that are written on the side of a bottle of oil from some of the off the shelf oils.    What has surprised me and I was already finding this out before I bought my truck with the GDI engine, that this newer fancy technology that seemingly would suggest better fuel economy/emissions with this high pressure spray of fuel is not in reality kind at all to the engine or at least the oils life. Yet they insist on claiming long OCI with this technology just like they did with the port or similar type fuel injection systems when in reality its a step back in oil life to have a GDI system.    I think the mistake your making Grumpy is that your not sending your samples to Blackstone and getting the feel good glowing report that you can run it another 1000 or more miles and then send another sample where they say run it yet another 1000 miles and on and on it goes until your sending in something that looks a lot like road tar and then they may suggest you change your oil within the next 1000 miles 😆
    • I am guessing that engines of that design back then had a better ability to be abused and survive longer than a new design engine with the long timing chain and the overhead cams and phasers etc. But I would never guess that an engine could go that far and not fail spectacularly or at least die a slow death. 
    • In the 80's 90's I'd run Honda's 7,500 miles between changes using Red Line HP 5W20 and do it for hundreds of thousands of miles with issues. Back in the day it was an SAE 20 with the HTHS of a SAE 30 and SN add load. It was also very polar. Oxidation VOA was over 120. Besides those motors were SPFI and lean burn tech. I could have likely run it longer but never did.    We had a Toyota bought new I ran on Pennzoil's latest and greatest synthetic of the day with "Penthane". A made up word for a very low dose of PAO. Tried 7,500 mile OCI's in that Group III/VI chemistry and the rings tapped out at 90K. Rocker box wasn't as bad as the one Punch put up but it wasn't good either. Also a SPFI motor.    I'm around 3,750 across the board on these GDI monsters and the oil it tapped out by then usually on TBN/TAN crossover and color. Red Line HP Euro.    The AMSOIL SS brochures tell you to follow the OEM values for the service class but that it can be run up to 25K if monitored. I can't imagine what motor could go that distance and not tap out. I've never owned one.    Yes, I know. Lot's of people do. I'm just not going to be one of them. 
    • I knew a guy in the early 80's that bought a new Monte Carlo and ran it a 100,000 miles without ever changing the filter or the oil. Just kept adding. It looked like that inside.     
    • Good evening. I was lucky enough to get passed down to me a 2007 GMC LBZ that was my great uncle's. While the underside and rockers are more or less gone I feel like with time I can restore it to working order since it only has 110,000 miles and he put nearly every option he could get without getting the new body style since he did not trust DEF. So far I have done everything I can think of but when I put the key into the ignition nothing happens. I put 2 brand new batteries in it. Cleaned the terminals. Check all the fuses and relays and they all pass with my multimeter. I know I'm missing something that I just cant think of. The only odd thing is the OBD2 port works which makes me think its not the mega fuse. Any advice would be greatly appreciated. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...