Jump to content

Recommended Posts

Posted
On 1/30/2018 at 1:06 AM, austingta said:

eAssist was California only, and 2wd only at that. Has that changed?

Yes.  I live in Central Illinois and my dealer had 2 2018's with the eAssist when I bought mine.

Posted

I have a 2018 2X4 LT eAssist (355hp) Silverado and just passed 3,200 miles. Purchased in June 2018. I have noticed the "bumpy" sort of surging when backing up as well. It is intermittent and because of other comments I knew to expect it. I also notice drive line "clunking" as well from time to time when shifting from Park to Reverse or Reverse to Drive. Not a hard clunk but.....noticeable. 

 

Gas mileage has been interesting. We drive around the city most of the time (San Francisco) and if we use a whole tank of gas on city driving only.....we get about 14mpg on average. Not what I expected with an eAssist. However....if we go on a long drive (SF to Tahoe and back) we get about 24-27mpg and that is a big improvement over my 2003 Silverado I replaced. 

 

I think the majority of fuel savings for me is the eAssist motor kicking in to assist and keep the active fuel management in V4 mode for longer time (or preventing V8 mode shift return altogether under light acceleration) when on the free way. 

 

I love the truck, huge improvement over the 2003 LS and kids dig the extra room with the crew cab. Enjoy the thread as well. Keep the comments/updates/experience coming.

Posted

Just purchased a 2018 with easiest.  I am fimular  with it as I had worked on electric vehicle programs previous to my retirement several years ago.  First off, you can turn it off if you don't like it.  I travel a lot and wanted the mileage.  I bought the 2WD crew cab. 8 speed.   My first 2WD in many a year, but just don't need it for anything.  I am loving my fuel economy.  I can get 25mpg (calculated) being conservative as I drive, but doing the speed limit.  I drove many electric vehicles for several years as the technology was being tested, so I know how to drive.  I am averaging 22mpg hwy and city.  I don't mind the start/stop feature at all. 

I am loving this so far, will see how it goes but works good for me with the 3;08 and 8 speed.  

Posted

I’ve had my 2018 e-Assist for almost 2 months. Bought it with 3,200 miles. It now has about 5,800. Mine does the surging in reverse as well. I don’t notice the start/stop since my 2017 Malibu has it. Just change your habits a bit and it’s not noticeable. I drive two footed, so I tap the gas before I need to romp on it. Or throw it in L for your quick stops.

I notice mine you can tell when it’s in gear from park and I’m totally cool with it. It’s a truck. Not a luxury vehicle. I want to know I put it in gear.

  • 1 month later...
Posted
On 10/19/2018 at 7:30 AM, boydpettitt said:

Just purchased a 2018 with easiest.  I am fimular  with it as I had worked on electric vehicle programs previous to my retirement several years ago.  First off, you can turn it off if you don't like it.  I travel a lot and wanted the mileage.  I bought the 2WD crew cab. 8 speed.   My first 2WD in many a year, but just don't need it for anything.  I am loving my fuel economy.  I can get 25mpg (calculated) being conservative as I drive, but doing the speed limit.  I drove many electric vehicles for several years as the technology was being tested, so I know how to drive.  I am averaging 22mpg hwy and city.  I don't mind the start/stop feature at all. 

I am loving this so far, will see how it goes but works good for me with the 3;08 and 8 speed.  

I love mine, bought it in July, 19 in the city and 25 mpg on highway

 

Posted
On 10/19/2018 at 7:30 AM, boydpettitt said:

Just purchased a 2018 with easiest.  I am fimular  with it as I had worked on electric vehicle programs previous to my retirement several years ago.  First off, you can turn it off if you don't like it.  I travel a lot and wanted the mileage.  I bought the 2WD crew cab. 8 speed.   My first 2WD in many a year, but just don't need it for anything.  I am loving my fuel economy.  I can get 25mpg (calculated) being conservative as I drive, but doing the speed limit.  I drove many electric vehicles for several years as the technology was being tested, so I know how to drive.  I am averaging 22mpg hwy and city.  I don't mind the start/stop feature at all. 

I am loving this so far, will see how it goes but works good for me with the 3;08 and 8 speed.  

 

On 10/19/2018 at 7:30 AM, boydpettitt said:

Just purchased a 2018 with easiest.  I am fimular  with it as I had worked on electric vehicle programs previous to my retirement several years ago.  First off, you can turn it off if you don't like it.  I travel a lot and wanted the mileage.  I bought the 2WD crew cab. 8 speed.   My first 2WD in many a year, but just don't need it for anything.  I am loving my fuel economy.  I can get 25mpg (calculated) being conservative as I drive, but doing the speed limit.  I drove many electric vehicles for several years as the technology was being tested, so I know how to drive.  I am averaging 22mpg hwy and city.  I don't mind the start/stop feature at all. 

I am loving this so far, will see how it goes but works good for me with the 3;08 and 8 speed.  

 

 

Posted

I bought mine in July and loving it!  19 mpg in city at 25-30 mph, 24- 26 mpg on hwy...eassist covered for 100,000 hardly ever notice it restarting, got a good deal when purchasing.

Posted
I bought mine in July and loving it!  19 mpg in city at 25-30 mph, 24- 26 mpg on hwy...eassist covered for 100,000 hardly ever notice it restarting, got a good deal when purchasing.


Ummm, you running on natural gas there?
Posted
9 hours ago, TXGREEK said:

 


Ummm, you running on natural gas there?

 

Mid grade, on regular gets a tad less

 

Posted
Mid grade, on regular gets a tad less  

 

 

That’s about where my 2028 CC Z71 6.2 was before the bigger heavier tires and a lift kit, 18-19mpg highway now, thanks to the SuperChips Tuner. I only run Super [emoji39]

 

  • 3 months later...
Posted

I like the e-assist a lot. I had a 2007 Avalanche and went to a 2018 silverado. The engine auto stop was a thunk at first, and was annoying, but 5000 miles now and I cannot barely feel it restart. Not sure if I'm. Just so used to it that I don't notice it, but I swear even focusing on it that it is now barely a shake. 

 

The system makes the truck a rocket. It has so much torque when the electric motor kicks in. I can accelerate at highways speeds to pass or get up to speed easy (unlike the under powered, overweight Avalanche. 

 

On a side note. If you have a older 5.3, reprogramming with a superchips unlocked power and best of all way more aggressive shifting. 

Posted

I'm on the fence with mine due to the lack of performance mods support. It seems no one wants to put any money and time into figuring out the programming. Instead just say it CAN'T BE DONE...complete BS. This includes tuners and performance parts manufacturers. Made me modify a CAI to work and also use L7 to get rid of AFM and Start/Stop since Range won't provide support for the L8B. Other than this...I think it's great. Haven't had much issues with the truck...power is sufficient if I drive it right. If I putt putt around then I do notice that the truck will get lazy and now downshift like it want it to, so I just blip the pedal...or use tow/haul mode. 

Anyone have the brakes swapped on the eAssists? Is everything the same still? If I can't better my 0-100 mph time, then the only thing left is to better my 100-0 mph time. 

  • Haha 1
  • 4 weeks later...
Posted (edited)

I bought the 2018 4x4 Silverado crew cab with eassist.  I have mixed feelings. I’m not really sure how the eassist helps with power or torque. The auto stop/start feature is nice if you live in an area where you’re waiting at traffic lights frequently. Kinda sucks if you live where you’re not in traffic much. Seems like it should have at least 3 seconds or more before it shuts off? It’s ridiculous to shut off when you’re just stopping at a four way stop etc. I think the auto start/stop on eassist is better than other brands that use the starter. It just instantly whirs back on. 

 I do believe eassist helps mileage. I currently got 21.5 mpg on a road trip with a couple hundred pounds of stuff in the bed and I actually checked it at the pump, not relying on the computer which always says you’re getting better mpg than actual.  I did notice on a trip when towing my small camp trailer I was getting 13 mpg. I towed the same trailer on the same route in my 2015 Yukon and it only got 9 mpg. Yukon has the same gen 5.3.  The option to jumpstart yourself is pretty cool. Except my trailer light was left on and totally drained my battery, if your battery is completely dead you can’t access the info screen to activate the jumpstart feature. I do notice that the 8speed transmission is very clunky, bumpy and shifts rough, but I’ve read that it’s like that in a lot of the trucks without the eassist.  Another thing  is that I don’t notice it as much when truck goes to v4 mode...I don’t get the lagging sound and lugging like in my Yukon and the regular Silverado I test drove. GM says the eassist helps the truck to stay in V4 mode longer. Only time will tell...not sure what it’s going to be like when the batteries or other components need service or replacing? Probably expensive??

 

Check out the MPG ratings...kinda strange that it gets less MPG than the standard 5.3 with the 6 speed...but it gets better than the standard 5.3 with the 8 speed.

 

If I could go back I probably wouldn’t have got the eassist.

Not sure if it’s worth it since I’m not seeing a significant fuel mileage increase. I do have to say that it tows amazing and hwy driving is amazing as well. Driving around town...not so nice. Clunky, surging, shifting hard and rough. Engine shutting off when stopped for a second.

Edited by Captainmc
Grammar
  • 4 months later...
Posted

I love my Eassist, I have a 2017 silverado ccsb4wd Lt Eassist, awesome economy, towing power. A head turner, even in the cold it works awesome.  I would definitely buy another one, if GM ever fixs the look on the new trucks [hate the fenders and wheel wells}]

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,889
    Total Members
    8,960
    Most Online
    smandy
    Newest Member
    smandy
    Joined
  • Who's Online   4 Members, 0 Anonymous, 457 Guests (See full list)


  • Latest Articles

  • Posts

    • Holy s**t - not much of a parts thrower you say? You BLASTED that thing with the parts cannon!  You'd have been probably $1,000 ahead if you had just brought it to a competent shop rather than shotgunning a bunch of parts it clearly didn't need.   Just FYI - oil additives are really, REALLY good at ONE thing ... and that's emptying your wallet. They're ALL useless gimmicks.   If that has the L94 or L99, then #7 is an AFM cylinder. I'd suspect a failed lifter in that case.   If you leaned on wiring, sensors, and/or connectors while changing the oil, you'll have to check all that to be sure pins didn't get pulled out, connectors broken, etc.. Old wire loom that was barely adequate when new is certainly brittle by year 19 - make sure wires aren't chaffed and shorting out somewhere where you might have leaned. or supported yourself on it.   If your a mechanic, why didn't you just find out what you were missing and troubleshoot from there??  TIMED spark, fuel PSI / injector pulse, air, compression.  Can't make ANY money going the parts cannon route.
    • LOL! Are you joking?? That wax SUCKS! 100% gimmick made to "look" good.    After just TWO winters I had severe surface rusting in patches over 90% of the frame. Only reason it looks great in the pics is because I SATURATED the frame every single fall with used motor oil for 14 of the 16 years I owned it. Otherwise it would've been sent to the crusher 8 years earlier with the speed it was rusting prior!    I sold that POS 3 years ago. Was a gigantic headache the second it rolled off the showroom floor. Brakes pulsated on the TEST DRIVE. Door trim fell off the 1st week! Interior squeaked and rattled, and the drivetrain clunked after 2k miles. 4x4 switch failed shortly after. Front end - ball joints, struts, hub bearings - all failed between 38k-50k. Engine started burning oil at 50k. Rear and and transmission failed before 100k. Nothing but problems, and frustration with the piss-poor engineering designed to make you give up. Well, it worked! Nothing on that truck was easy to remove ... except the wheels. They haven't figured out how to screw that up yet. Give 'em time ...   I won't make that mistake again. EVER.   Such fond memories ... https://postimg.cc/K1qf23tS  https://postimg.cc/gallery/X02z64J  https://postimg.cc/gallery/mHSRXZv  https://postimg.cc/gallery/D4mMRfL
    • Different monitors do their test only under conditions specific to that monitor.  you MIGHT find the drive cycle conditions for the monitor that isn't ready on this site: https://lemon-manuals.la/   If it's not there, then it should be on alldata.com for your truck, but it requires a paid subscription.   And you need to know which specific monitor isn't ready.
    • from another thread   Update...although the truck sometimes seems to idle weird and the transmission shift a little weird, I've driven about 7,000  miles and no issues.   However, the way GM has handled my rental reimbursement, the situation when my truck quit, and the recall in general has led me to this point...I have driven a GM vehicle for the past 46 years and unless I buy a C3 Corvette, this is the last GM vehicle I will ever own. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...