Jump to content

Recommended Posts

Posted

My truck was there for oil change they did it on there own. They said they even replace the trailer switch said that was shorted out. Unless this is something that is just coming out this week that is new. The things they did to my truck didn't fix it.

Posted
My truck was there for oil change they did it on there own. They said they even replace the trailer switch said that was shorted out. Unless this is something that is just coming out this week that is new. The things they did to my truck didn't fix it.
I wonder if your paperwork has any info referencing the bulletin that was sent out by GM posted earlier in this thread?

Sent from my SM-N960W using Tapatalk

Posted

Well, I would think if GM told the other guy today that the fix is coming in 7-10 days, the work they did to your truck @kensseirra , is probably not it. I think we’ve all been to the dealer to have the inspect the connector, etc. That was in the original TSB dated Jan 7th. Maybe they were just double checking that until the actual fix comes in.

 

I will be at the dealer in the next week to have my performance exhaust put on. Hoping they will have the program by then.

  • Like 1
Posted

I hope they finally have a fix for this I started this in November

it’s been driving me crazy

 

 

Sent from my iPad using Tapatalk

 

  • Like 1
Posted
I hope they finally have a fix for this I started this in October
it’s been driving me crazy


Sent from my iPad using Tapatalk
I drove four hours straight with the screens cycling nonsense. It's definitely annoying as hell!

Sent from my SM-N960W using Tapatalk

Posted

I tried adjusting my trip meter today and the non-stop alerts was just ridiculous


Sent from my iPad using Tapatalk

Posted
I tried adjusting my trip meter today and the non-stop alerts was just ridiculous


Sent from my iPad using Tapatalk
Hahah! I'm laughing WITH you...not AT you. [emoji23][emoji51]

Sent from my SM-N960W using Tapatalk

Posted

Does anyone know if the errors are still just as prevalent if a trailer is really connected
I’m going on a snowmobile trip to Quebec Second week in March
I have not had the trailer actually connected to this truck yet



Sent from my iPad using Tapatalk

Posted

If I get errors the whole time the trailer is connected
That is going to make for a very long annoying trip approximately 13 hours each way


Sent from my iPad using Tapatalk

Posted

Yes you will still get  the error the whole time with the trailer. I even get check trailer lighting when towing my trailer. Stopped to look an tail lights are working fine.

Posted
Yes you will still get  the error the whole time with the trailer. I even get check trailer lighting when towing my trailer. Stopped to look an tail lights are working fine.

Great thanks
I hope that this new fix works


Sent from my iPad using Tapatalk
Posted

My new 19 has many of the issues listed here. Have taken to the shop three times, got updates and very little help. Mine acts up in wet weather. A drive thru car wash lights up the park assist and get side detection unavailable. Lane assist only working once in awhile. Most say cold weather, is it wet and snowy? Could that be causing moisture? Seems to me the have a power bleed when wet. 

Posted

Talked to dealer yesterday.  Even knowing they say the fix will be ready in 7-11 days, they said that could be 30 days in GM time.  If anyone has gotten the reprogramming this week, has it worked? They also gave me what fuses to pull to stop this issue. These fuses are for the Power Source and Trailer Integration.  If you are going to be pulling anything, you CAN NOT pull these fuses, but is you are not you can.  The fuse numbers are 74 and 82.  I have not done this as of yet, if anyone does, can you post if this resolves this issue.  Wish GM would come out with a common message for everyone instead of giving different people different messages. 

  • Like 1
Posted
1 hour ago, ajwineski said:

Talked to dealer yesterday.  Even knowing they say the fix will be ready in 7-11 days, they said that could be 30 days in GM time.  If anyone has gotten the reprogramming this week, has it worked? They also gave me what fuses to pull to stop this issue. These fuses are for the Power Source and Trailer Integration.  If you are going to be pulling anything, you CAN NOT pull these fuses, but is you are not you can.  The fuse numbers are 74 and 82.  I have not done this as of yet, if anyone does, can you post if this resolves this issue.  Wish GM would come out with a common message for everyone instead of giving different people different messages. 

My truck went in and came back yesterday with the "new fix". I am out of town so the wife took it in. She said the error popped up that morning and she did not experience that evening when they brought it back to her. I get back tomorrow and temps are supposed to be below 20 all weekend so I'll get it out this weekend for a better test.  Ironic this fix showed up right after I had a buy back request submitted and the attorney general's letter arrived at the dealership (submitted a complaint online to start procedures around the lemon law).  I am going to assume that since they are telling others 7-10 days that I may be part of their QA process on the new program... or they just took it in to buy some time. At this point neither would surprise me. 

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.6k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,993
    Total Members
    8,960
    Most Online
    President Roberto
    Newest Member
    President Roberto
    Joined
  • Who's Online   1 Member, 0 Anonymous, 209 Guests (See full list)


  • Latest Articles

  • Posts

    • I don't wanna do major surgery/upgrades, behind-the-dash work, add amps, change radio etc. on my '26 std cab WT. On the WT, it has the base 7" IOR infotainment setup, and only two speakers (doors). Since I listen to classical, looked around for speakers that do well and dug thru reviews. Two-way speakers were found to be better than 3-way. So I've ordered a pair of  Infinity Reference REF-9632IX 2 way speakers.  [These may  or may not have been discontinued / succeeded by the 3-way ...9633 ones.]    These speakers are lauded for 3 ohm and 94db sensitivity spec so they'll work well for ordinary base car radios without amps and offer better performance (quality,  strength) than  default base paper-cone speakers. They'll be installed in a few days and I'll let y'all know what I think. Bill W San Jose      
    • Thanks!   Changed out the rear shocks today to Bilstein 5100s.  So far feel much better. The stock Rancho were wore out.  Lots of heavy hauling (2 moves, home renovations, etc).  Next up is new BFG tires Monday.  Cant wait the current tires have little to no wet traction and are super loud (hum)    
    • Ok, I got the all the codes. What do you all think would be a place to start?
    • How about I just point to the factory pans stand pipe little drain plug and claim its a pan with a real drain plug !. I just couldn't swallow the fact that a Dorman pan which at this point is probably the only pan out there that fits the gas version truck cost that much up here in Canada so I decided initially anyway to skip it and see what I thought of pulling the pan method and down the road if I felt inclined enough then I would either install a drain plug kit in the factory pan if there is enough room for it, or have a bung welded onto it, or put an aftermarket pan on. The thing is if the pan is not pulled then the magnets in the pan can't be inspected and cleaned or if wanting to change out the filter. However of course it certainly would make the job easier to be able to drop the oil first before having to handle the pan if dropping the pan that go around was the goal.    I knew a guy locally that was doing custom field spraying years ago with a pickup pulling a ground driven sprayer, I believe it was a GM pickup with an automatic trans. He had a drain plug in his pan and would drop the oil out of it once a week and top it back up through the dipstick tube to keep refreshing a portion of the oil often and that made the transmission last far longer than had he done nothing. Soft fields pulling 500 gallons of water at the start of each mixed up sprayer tank batch and in low range sucking along. I imagine he got some tips from other custom sprayer outfits doing the same thing at the time and learning from their blown up tranny mistakes. Transmissions then had no lock up converter so would cook the crap out of the fluid slipping that much and it would not have been synthetic fluid either. 
    • 3.39 Kroger’s in Montgomery Texas. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...