Jump to content

Fuse for Memory Seat switch?

trammd

By trammd
in Troubleshooting & Recalls

 Share

Recommended Posts

trammd Enthusiast

trammd

Posted
Posted

Hi, does anyone know if there is a fuse for the door switch that controls the memory seats in my 2014 Silverado LTZ Z71?

I have NO functions and the backlight doesn't work on the switch. This is a brand new switch, I just replaced it as I was thinkinking the switch was bad but now???????

 

Where and what # fuse is it?

The power seat functions fine....Just no memory functions and the switch does not light up so maybe fuse related???

 

Thanks!

JimCost2014 Senior Enthusiast

JimCost2014

Posted
Posted
4 hours ago, trammd said:

Hi, does anyone know if there is a fuse for the door switch that controls the memory seats in my 2014 Silverado LTZ Z71?

I have NO functions and the backlight doesn't work on the switch. This is a brand new switch, I just replaced it as I was thinkinking the switch was bad but now???????

 

Where and what # fuse is it?

The power seat functions fine....Just no memory functions and the switch does not light up so maybe fuse related???

 

Thanks!

Just throwing it out there, do you have all of the settings in the MyLink set to on? Does the new switch "beep" when you push the buttons?

trammd Enthusiast

trammd

Posted
  • Author
Posted

NO beeps, No light. I have tried with the settings on or off in Mylink......Nothing. Just FYI mylink settings are just for "auto memory recall" on or off and Easy exit " auto " settings. even with those disabled in Mylink you should still be able to set and recall seat positions manually with the memory switch.

 

This is curious, should either one or both of my keyfobs be programmed driver "one' or driver "two" for the memory seats to work????  I ask because when I start my truck it doesn't say driver 1 or 2 with either of my 2 keyfobs. Maybe someone can answer that for me. Do you get a driver one or two message on the DIC when you use your keyfobs???

JimCost2014 Senior Enthusiast

JimCost2014

Posted
Posted
4 minutes ago, trammd said:

NO beeps, No light. I have tried with the settings on or off in Mylink......Nothing. Just FYI mylink settings are just for "auto memory recall" on or off and Easy exit " auto " settings. even with those disabled in Mylink you should still be able to set and recall seat positions manually with the memory switch.

 

This is curious, should either one or both of my keyfobs be programmed driver "one' or driver "two" for the memory seats to work????  I ask because when I start my truck it doesn't say driver 1 or 2 with either of my 2 keyfobs. Maybe someone can answer that for me. Do you get a driver one or two message on the DIC when you use your keyfobs???

I don't think that there are messages, but the truck does recognize the fobs, so if you have different setting for 1 and 2 it will adjust to which fob is being used. Do the other switches on the door work ok?

trammd Enthusiast

trammd

Posted
  • Author
Posted

yes ALL other door switches work great and are backlit. Today when I had the door panel off to install the new switch I looked at everything as far as the wiring etc and it all looked good.

This has really got me scratching my head.

JimCost2014 Senior Enthusiast

JimCost2014

Posted
Posted (edited)
2 hours ago, trammd said:

yes ALL other door switches work great and are backlit. Today when I had the door panel off to install the new switch I looked at everything as far as the wiring etc and it all looked good.

This has really got me scratching my head.

Do you have the ability to check if there is power coming to the switch? Never mind that question, does the heat function work, think I am getting close to finding the problem. 

Edited by JimCost2014
trammd Enthusiast

trammd

Posted
  • Author
Posted

Yes I do.if I knew which wire was supposed to be powered at rest I could back probe the switch or just unplug the switch and check for power signal at the harness plug. Anyone have a wiring schematic?

JimCost2014 Senior Enthusiast

JimCost2014

Posted
Posted
11 hours ago, trammd said:

Yes I do.if I knew which wire was supposed to be powered at rest I could back probe the switch or just unplug the switch and check for power signal at the harness plug. Anyone have a wiring schematic?

Thinking the fuse you are looking for powers the memory seat function/switch and the heat function of the power seats.

JimCost2014 Senior Enthusiast

JimCost2014

Posted
Posted (edited)
20 minutes ago, trammd said:

Heat function is good. Where can I find that fuse? Door jam or underhood fuse center?

Found this: The only fusable protection that I can locate is the 30A circuit breaker under the dash.
My thoughts are that the circuit breaker is protecting a blown control module for the seat functions. Is this easily accessable?

Edited by JimCost2014
Jaychevy81 Enthusiast

Jaychevy81

Posted
Posted

The only thing is it’s not just memory seat it also adjusts pedals, mirrors. So it could be elsewhere maybe. Have you tried disconnecting the battery for a min.


Sent from my iPhone using Tapatalk

trammd Enthusiast

trammd

Posted
  • Author
Posted

I wonder if there is a bcm just for the memory controls? Or if there memory function is controlled by the main body control module?

Jaychevy81 Enthusiast

Jaychevy81

Posted
Posted

I do know this it does go through diff modules. Did you try the second Key driver one driver 2. I would disconnect the battery for a min if you didn’t already try this.


Sent from my iPhone using Tapatalk

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • asilverblazer
      2027 GMC Sierra: Official Discussion

      By asilverblazer · Posted

      Kudos? Are any of them desirable? Class leading (in any metric)?
    • GMCustomerService
      2026 TurboMax L3B 2.7L: AFM/DFM present/disablable? [2026 Silverado 1500WT: 4WD RC RB 2.7L]3GCNKAEK9TG345558

      By GMCustomerService · Posted

      Those are great questions, Bill. Our team looked into your VIN and it doesn't appear to have AFM or DFM. Please know, we take the personal and private information of our customers seriously, and we don't recommend posting your full VIN publicly. As for Auto Stop, some vehicles have a button to turn Stop/Start off for one ignition cycle. If the vehicle is equipped with the Stop/Start deactivation switch, you can push the switch to turn off Stop/Start. Stop/Start is turned off when the LED indicator on the switch is not illuminated. If you have any further questions, please visit https://s.chevy.com/support-request and fill out the support request form with all pertinent details. This form helps our team gather the right information and ensures your request is routed appropriately. 
    • diyer2
      The Peckish Synapse

      By diyer2 · Posted

      She's laughing all the way to the bank.
    • newdude
      SLE 2.7L L4 shudders @ 2000-3000RPM

      By newdude · Posted

      There's a new PI on 2023-2026 L3B shudder.  Possible faulty front oxygen sensor.   Dealer can pull up PIP6060A and give it a read.  
    • newdude
      OBD not ready?

      By newdude · Posted

      Also here's the drive cycle for a 2021 Yukon with V8.  DO NOT USE THE CRUISE CONTROL WHEN RUNNING DRIVE CYCLE!!!!!:   Warning: Road test a vehicle under safe conditions and while obeying all traffic laws. Do not attempt any maneuvers that could jeopardize vehicle control. Failure to adhere to these precautions could lead to serious personal injury and vehicle damage. Note: You have completed this procedure when all parameters display Complete. Short stops for traffic will not affect the procedure. Note: Do NOT use cruise control during this procedure. Ignition/Vehicle » Off — For greater than 8 h Verify the scan tool parameter: Cold Start-Up = Yes If not the specified state Ignition/Vehicle » Off — For greater than 8 h & Repeat this step If the specified state Ignition » On / Vehicle » In Service Mode — For 1 min Engine » Idling — For 2 min Drive the vehicle while maintaining the following conditions for 20 min: Part Throttle Vehicle Speed = 24 to 97 km/h (15 to 60 MPH) Safely stop the vehicle Operate the engine/vehicle within the following conditions: Accelerate the vehicle to 64 km/h (40 MPH) Accelerate the vehicle from 64 to 97 km/h (40 to 60 MPH) @ Throttle position between 10% and 13% Release the accelerator pedal and let the vehicle coast down with the brake pedal released — For greater than 20 s Accelerate the vehicle from 64 to 97 km/h (40 to 60 MPH) @ Throttle position between 13% and 16% Release the accelerator pedal and let the vehicle coast down with the brake pedal released — For greater than 20 s Accelerate the vehicle from 64 to 97 km/h (40 to 60 MPH) @ Throttle position between 16% and 19% Release the accelerator pedal and let the vehicle coast down with the brake pedal released — For greater than 20 s Accelerate the vehicle from 64 to 97 km/h (40 to 60 MPH) @ Throttle position between 19% and 22% Release the accelerator pedal and let the vehicle coast down with the brake pedal released — For greater than 20 s Accelerate the vehicle from 64 to 97 km/h (40 to 60 MPH) @ Throttle position between 22% and 25% Release the accelerator pedal and let the vehicle coast down with the brake pedal released — For greater than 20 s Maintain steady state throttle at 89 km/h (55 MPH) — For 10 min Safely stop the vehicle

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...