Jump to content

Recommended Posts

Posted

Is there a way to turn the cig plug, next to the 110 plug on ‘19 Denali, off when vehicle is turned off? My radar detector stays on all times! 

Posted

To my knowledge, no.

 

You may want to think about wiring it directly into the fuse panel and use a fuse tap to connect it into a fuse that only has 'key on' power so that it turns on and off with the truck.

 

Here is a link for a dash cam install I used. It would basically be the same thing except you'd only use one power wire with one fuse tap going into the 7.5 amp heated steering wheel fuse.

 

 

Posted

I wired mine in to the back of the mirror cover on the windshield, works great.

Posted

So, it is an “always hot” outlet? No way to turn off? Hey guys, thanks for the Hotwire input. I will more than likely wind up going that route anyway.

  • 1 year later...
Posted

GM has been leaving it hot for years. My Avalanche has 3 all hot, ridiculous. Can’t leave anything plugged in.


Sent from my iPhone using Tapatalk

Posted
On 11/18/2020 at 1:53 PM, Nieds1323_Matt said:

Yes there is.  I just did it on my 2020 Chevy 2500.  Watch the youtube video below.

 

I also went to this link: https://fuse-box.info/chevrolet/chevrolet-silverado-mk4-2019-fuses-and-relays 

 

to find out where my fuse was.  I switched it as he did (mine was on the other side of the vehicle) and it works!!!!

 

 

 

 

this worked a little different on my late 2019 but indeed it did work.....thank you for the help

 

Posted
On 11/18/2020 at 5:35 PM, KARNUT said:

GM has been leaving it hot for years. My Avalanche has 3 all hot, ridiculous. Can’t leave anything plugged in.


Sent from my iPhone using Tapatalk

Leaving them hot was a handy thing back when everyone smoked, and they were primarily for lighters rather than powerpoints....

 

Posted
Leaving them hot was a handy thing back when everyone smoked, and they were primarily for lighters rather than powerpoints....
 

The outlets I was referring to were outlets not cigarette lighters. In any event simply switching the key would turn them on if desired. Staying hot is an inconvenience.


Sent from my iPhone using Tapatalk
  • 1 year later...
Posted
On 11/18/2020 at 12:53 PM, Nieds1323_Matt said:

Yes there is.  I just did it on my 2020 Chevy 2500.  Watch the youtube video below.

 

I also went to this link: https://fuse-box.info/chevrolet/chevrolet-silverado-mk4-2019-fuses-and-relays 

 

to find out where my fuse was.  I switched it as he did (mine was on the other side of the vehicle) and it works!!!!

 

 

 

 

 

Hey does this fuse location work when the vehicle is remote started?  If not do you know one that is?  Im sick of having no heated seats (dealer ship keeps wanting me to throw money at it) so im buying an after market one.

  • 1 year later...
Posted

This will actually work out for me with my dashcam for parking protection, now I won't need to hardwire it or find an external power supply. The cable won't bother me because it's only while it's parked.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • My 2015 1500 LTZ Silverado suddenly won't go into 4 x 4 low. It will go into 4 x 4 high.
    • Yep, just a quick reference point.    My main point being I’d do a thousand other things before I’d pay 10k for a transmission.    Speaking in ignorance cause I don’t look at these trucks, what is it worth? 20k?
    • I think users are going to want to pick their monitored parameters, which parameters they want to see first.    It should probably start with baseline at a minimum and adjust to learned, but be able to overlay baseline for comparison.   A simple severity level would be able to determine what type of alerting is appropriate or user selectable.    Why not use the OBD port though?   I think a phone connection would be a good idea, push notifications type deal.   Number 1 issue is having data is useless if you don’t know what the data should be under normal conditions. 
    • I thought I would use your thread and add to it as I just did my first longer drive with my truck in the last couple of days. I drove from the Grande Prairie area of Alberta down to Edmonton and most of where I drove in the city was the ring road so fairly free flowing but a bit of stop and go as well in the city. Stayed the night and returned home and not too many stops along the way each way but every restart and certainly every cold start sets it back for fuel mileage. Why I say that is I see some people will cherry pick a fuel mileage leg after the vehicle had been warmed up driveline wise before hand and its a forgiving ( easy rolling drive leg for example ) and call that their fuel mileage which can give a false perception of reality. I was not heavily loaded at all but never the less the flip bak cover, rubber bed mat, various tools etc and extra jerry cans of fuel all way up to a few hundred pounds of dead weight so its not an empty truck. The cold inflation tire pressures are set more near the freezing point so once they are warmed up driving I was showing 45 front and over 40 rear and realize high inflation pressures would help a little in fuel mileage but certainly not the ride on our crap sections of highway. The weather was good so was not raining as that can really drag mileage down, in fact I had a bit of a tail wind on average driving home. Most people on here would never have driven on that freeway to visualize it but its got a fair bit of rolling type of landscape with numerous river valleys. For the most part I had it on cruise set to 62 although kicking it off if I caught it in time before it started down shifting and self braking going down the grades. Most of the more substantial grades its shifting into 7th I believe as 8th just doesn't have it. Total distance round trip was 643 miles and my overall average and I did refuel three times in all, figured out to 17.65 miles per US gallon. My best fuel mileage section refuel within all of this figured out to 18.46 and these are all hand calculated figures. I find if anything that the trucks computer can be over optimistic, sometimes its pretty close but other times its stretching it. On paper persay in theory the truck would have just about made it on fumes for that whole drive without refueling once.    Which made me think of the topic thread of the wonder if these trucks could do 20 mpg and that is a good question, certainly would have to be on an easy going flat highway, no head wind, the right temperature, not packing around a bunch of dead weight and puttering along even slower than I was I would suspect and going steady and not stopping to smell the flowers or take a piss !. It probably is possible but not without effort to attain that with the wind resistance and weight of these trucks. Of course on my drive most people are passing me if they have the power as per loaded highway tractors, never mind a lot of speedy vehicles but the speed limit is 68 and most are at or well over that. 
    • Monday looks like a good day for the dealer to test an ac issue. Hopefully it all turns out good.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...