Jump to content

Recommended Posts

Posted
1 hour ago, Lsgun1 said:

From what I'm reading the JL is supposed to be pretty bad ass. Subs meant for small space encloures and the box is all fiberglass. If it was $500 it would be a lot more appealing since it still needs an amp.

Subs also need a certain amount of space between the cone and loading wall aka the floor in this instance.   So i think it is going to sound muffled and wont allow for full extension.  

Posted

I bought a custom made box from a member on here well over a year ago to replace the factory bose one. I believe I got one of the last ones he made before he stopped doing it. Too bad though because quality, customer service, instructions, and price were all great. I put a JL w8 powered by an Alpine amp (with a rux knob) in it. Sounds amazing paired with the factory Bose speakers. I'm very impressed with how hard it can hit when you crank it up. Sounds very clean and crisp at normal levels. Very glad I did it...

Posted

I bought a custom made box from a member on here well over a year ago to replace the factory bose one. I believe I got one of the last ones he made before he stopped doing it. Too bad though because quality, customer service, instructions, and price were all great. I put a JL w8 powered by an Alpine amp (with a rux knob) in it. Sounds amazing paired with the factory Bose speakers. I'm very impressed with how hard it can hit when you crank it up. Sounds very clean and crisp at normal levels. Very glad I did it...

Posted (edited)

Chris do you have any pics? That w8 is a decent sub and it might be a fun project adding 1 in the center console before I throw a couple subs under the back seat. Plan for right now is 4 DD 506'S but I might buy 1 now to throw in the console spot

Edited by Bohanan23
Posted

Hello all, I’m new to this forum so be kind f I’m posting this in the wrong place. I’ve recently bought an 05 Yukon a and it turns out that the previous owner cut the entire wire harness I guess the OEM white harness and now I’m stuck with nothing trying to figure it out I don’t know which wires go where her 30 minutes the choirs or what the case may be and if anybody has pictures and diagrams or any input as to where to even begin please advise I’m almost ready just to my entire wiring harness for the entire vehicle I’m hoping it doesn’t come to that thanks guys


Sent from my iPhone using Tapatalk

Posted
1 hour ago, elpapasneaky said:

Hello all, I’m new to this forum so be kind f I’m posting this in the wrong place. I’ve recently bought an 05 Yukon a and it turns out that the previous owner cut the entire wire harness I guess the OEM white harness and now I’m stuck with nothing trying to figure it out I don’t know which wires go where her 30 minutes the choirs or what the case may be and if anybody has pictures and diagrams or any input as to where to even begin please advise I’m almost ready just to my entire wiring harness for the entire vehicle I’m hoping it doesn’t come to that thanks guys


Sent from my iPhone using Tapatalk

You need to go to the 99-06 section

  • Like 1
Posted
On 5/1/2019 at 9:34 PM, Nasty said:

After talking with a buddy. I dont think im going to be using this enclosure in my truck. So when it shows next week its going uo for sale

what did he say that turned you away from it. 

Posted
what did he say that turned you away from it. 
Direction of the sub matters and downfiring like that wont give me what i want

The center console box i ordered just showed up and its going right up for sale

Sent from my SM-G955U using Tapatalk

Posted
4 hours ago, Nasty said:

Direction of the sub matters and downfiring like that wont give me what i want

The center console box i ordered just showed up and its going right up for sale

Sent from my SM-G955U using Tapatalk
 

Give it a try. You might be surprised 

Posted
Give it a try. You might be surprised 
Gonna have to pass. Its already io for sale. I know it wont do what i need it to

Sent from my SM-G955U using Tapatalk

  • 2 years later...
Posted

Huntr1117 did you add and amp with that new kicker sub or just use the oem one? Thanks

  • 1 year later...
Posted
On 4/30/2019 at 9:27 PM, huntr1117 said:

I dont have a JL box but I did get an aftermarket box off Ebay that replaces the factory Bose sub in the console with an 8" sub. I removed my 10" sub box that I had under my rear seat so I could reinstall my underseat storage box. The 8" in the center console sounds so much better than the 10" under the rear seat. It doesn't rattle and just sounds clean.8d554e799c65eef8300a6e1b7a84e67b.jpga1f1451d93938a60f81b0fc5472dee32.jpg45de39fa8de543558fbca9a75b2b6378.jpg64cd20bef03d2594e8dbd15584e6f9f0.jpg

Sent from my SM-G975U using Tapatalk
 


do you know the dimensions and volume of this box?  I don’t see it in ebay anymore and will build one. 

  • 2 years later...
Posted
On 4/30/2019 at 11:34 PM, rah7777777 said:

I’m in the middle of installing that eBay box now with a kicker 8”. I bought his full kit with the kicker Amp. 

I haven’t found the box on eBay yet, but I’m still looking. How did you like everything after your install. And what amp and sub did you install? Thank you for any help. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,897
    Total Members
    8,960
    Most Online
    ncleg
    Newest Member
    ncleg
    Joined
  • Who's Online   4 Members, 0 Anonymous, 1,224 Guests (See full list)

  • Latest Articles

  • Posts

    • Having owned 4wd vehicle since the 1970s I find there are varying opinions on how to use 4wd, every owner is an expert in their minds.  IMO, 4LO is the appropriate gear and what I would use,  You have to feather the gas to avoid spinning tires and the lower the gear the better chance.  But like I said you will find those that think their method is best.  I live near a boat launch.  Yesterday there was a new Ford Maverick pulling out a pontoon boat almost 2x its size, they had no problems and they don't have a LO range.   True story. One winter day not long ago I was coming out of small town post office and there was a F150 4wd parked in front and was stuck foot deep snow ruts. I knew the lady so I asked her to put it in 4wd (wondering why in the middle of a 2-day snow storm she wasn't).  Her reply surprised me, "my husband" (the expert) told me not use that because it uses more gas. She finally got unstuck spinning in 2wd which likely used more gas than not.  
    • Your tire pressure issue may just be batteries, you can reset them using tge Ing switch (I think) and the owner's  manual. ChatGTP will b e a faster, better help than Google.
    • The thinking is that starting out in a higher gear makes it easier to avoid applying excessive torque when pressing the gas pedal. In a modern 4wd truck with 4 low and a limited slip or locking rear end, I would use 4 low and try to crawl up the ramp. Sometimes if they are too slippery, you have to back up to let the boat have some bouyancy, and then accelerate briskly to get some momentum to help you pull the through the slippery parts. 
    • I have a Retrax pro that I first had on my 2020 chevy and transferred it to my current GMC.  It stays in the garage most of the time, so hard for me to judge it's long term weather resistance.  It still works perfectly, been very durable.  It doesn't see oil patch usage, but it's not a mall queen.  It keeps most things mostly dry (small leaks) and the security of it is enough to slow someone down but not keep them out for long.  I would buy one again, it works for me.     
    • Thanks to the convenience of Amazon, I was able to get a few things done to the truck today.  I installed Carquest Premium oil and air filters with five quarts of Mobil1 High Mileage 10-30 along with a quart of Pennzoil Platinum 5w-30 I already had.  The latch for the flip up center console lid was broken so I replaced it along with the power mirror switch.  I found my push retainer assortment this morning and reattached the plastic under the bumper and it was only held on with a few screws and retainers.  Then I programmed a new remote keyless entry fob so I can lock my dog in the truck when I take her out with me (I've got to keep the air going for her since it's been in the 100s).  Finally, I ordered some LED interior bulbs and replaced the reading lamps.  The front lights are working fine while one of the back lights only works intermittently and the other not at all.   While under the truck, I found the source of at least one of the noises: the sway bar links need replacing.  I ordered a set of Suspension Dudes links with Code Red bushings.  Never heard of them, but they're made in the USA and have decent reviews.  While making yet another Amazon order, I went ahead and added a set of front tow hooks.  I went with red, since that's the color of the sway bar link and bushings and it should look decent enough on a black and chrome truck.  Speaking of which, it doesn't bug me much, but the passenger side mirror has a chrome cap while the driver side doesn't, so eventually I'll make them match one way or another.  Oh, and I ordered a $20 TPMS reset tool.  No idea if it will do anything for my sensors but it was cheap and will work for the Ford Transit Connect as well.     For tradition's sake, I ordered a new oil change wrench.  I kept the Snap-On 9/16"x15mm GM wrench I bought when I was 18 in the 2006 GMC from the time I bought that truck until the truck was lost.  While I was tempted, there's no need to spend $80 for a new SO wrench, or even $50 with shipping for a used one on Ebay.  I just bought a Duratech 15mm extra-long ratcheting wrench to do the job as needed.  It works, and if I like that wrench enough, I'll buy the set.  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...