Jump to content

Recommended Posts

Posted (edited)
On 12/18/2019 at 9:32 AM, Andrew F said:

Had the muffler and flapper removed on my 2020 Custom Trail Boss. Love the sound!

 

No issues after a few days of driving. I drive a lot of highway to and from work, typically have my cruise set at 73-75. Cruising at that speed I can hear the exhaust slightly but am not getting any drone. When I'm on the gas or accelerating up hill, there is a slight amount of drone but nothing crazy. Haven't heard any backfiring when downshifting. I do have the AFM disabled so I'm using 8 cylinders all the time.

 

Edited by Andrew F
Posted
12 minutes ago, Belo said:

really no drone though?

Guess it depends on what you mean by drone.  Its audible when accelerating, quiet when coasting.  Amount of sound when accelerating is commensurate with how much gas your giving it.   Cruising at highway speed isn't very noticeable unless going uphill. Honestly though, the whole point is to make it louder -  

Posted
1 minute ago, cccjrsbox said:

Guess it depends on what you mean by drone.  Its audible when accelerating, quiet when coasting.  Amount of sound when accelerating is commensurate with how much gas your giving it.   Cruising at highway speed isn't very noticeable unless going uphill. Honestly though, the whole point is to make it louder -  

drone is a hum or drone lol at cruising speeds (50-70). I've owned a lot of performance cars and bikes and typically to get the best acceleration rumble and no drone you have to pay. Drone didn't bother me at 24 with 2 12" subs bumping with friends all the time. But it does at 36 with coworkers, wife or just a podcast playing lol.

 

So it's interesting to hear it's possible with a cutout, which is something even borla can struggle with sometimes. That's why there are those who are skeptic.

 

If i owned and didn't lease I might make an appointment tomorrow to do this. Worst case I'm out $100 to try it and another $100 to undo it. That's still a shit ton cheaper than any aftermarket.

Posted
1 hour ago, Belo said:

drone is a hum or drone lol at cruising speeds (50-70). I've owned a lot of performance cars and bikes and typically to get the best acceleration rumble and no drone you have to pay. Drone didn't bother me at 24 with 2 12" subs bumping with friends all the time. But it does at 36 with coworkers, wife or just a podcast playing lol.

 

So it's interesting to hear it's possible with a cutout, which is something even borla can struggle with sometimes. That's why there are those who are skeptic.

 

If i owned and didn't lease I might make an appointment tomorrow to do this. Worst case I'm out $100 to try it and another $100 to undo it. That's still a shit ton cheaper than any aftermarket.

That was my thinking...  If I did the $100 mod and didn't like it, I could just jump in the truck and drive my happy a$$ down to Summit Racing and pick out a catback system and install it...

My 2018 sounds a bit deeper and louder than the 2019, but the 2018 has a definite drone whereas this one is nearly non-existent...

  • Like 1
  • 3 months later...
Posted

Will covering the resonater with muffler tape set iff any warning lights?  I just had a flowmaster 10 series put on and cant even tell. Im thinking about using the muffler tape on the resonater to see if that helps but indont want to trip a warning light in the dash

Posted
Will covering the resonater with muffler tape set iff any warning lights?  I just had a flowmaster 10 series put on and cant even tell. Im thinking about using the muffler tape on the resonater to see if that helps but indont want to trip a warning light in the dash

No it won’t set off any warning lights. I used HVAC aluminum tape on mine several months ago. Holding up just fine.


Sent from my iPhone using Tapatalk
Posted

Thanks. I put a magnaflow on and turned around 5 min after i left and had them swap it out for a flowmaster 10 series. I was still very upset with the results as it was not much louder than stock. I went to the dealership to see what could be dont and all they said was order the CATback system they sell for $1500 and it would help it a little. I wasnt happy about eating $250 on the flowmaster install and definatly wasnt going to eat $1500 for probably the same sound i got according to them. So i got some muffler tape came home and taped all 3 holes up. I am happy now. Would loke more sound but this will due until my warranty runs out and at thatbpoint il probably have the shop cut thenpipe off and put on something without the resionators. Thanks for the info it helped. 

  • Like 1
Posted
You will find if you experiment with covering the resonator mesh screens it will dramatically change the sound.  My magnaflow was very quiet too. I currently have the middle resonator mesh on each side only uncovered and I think it’s the best sound so far. 
Muffler tape works great. Cut it to the shape and stick it on. So far it has stuck great and it doesn’t look like a hack job. 

Any drone from that setup with only the middle resonator uncovered? I’m trying to add a little more tone on mine. I have a Borla Pro XS muffler on mine and still left the “flapper” valve to reduce the noise on the highway especially when DFM is not running all cylinders. But heard that some covered all of them and gets drone and others playing around with the combination of it.


Sent from my iPhone using Tapatalk
Posted
Thanks. I put a magnaflow on and turned around 5 min after i left and had them swap it out for a flowmaster 10 series. I was still very upset with the results as it was not much louder than stock. I went to the dealership to see what could be dont and all they said was order the CATback system they sell for $1500 and it would help it a little. I wasnt happy about eating $250 on the flowmaster install and definatly wasnt going to eat $1500 for probably the same sound i got according to them. So i got some muffler tape came home and taped all 3 holes up. I am happy now. Would loke more sound but this will due until my warranty runs out and at thatbpoint il probably have the shop cut thenpipe off and put on something without the resionators. Thanks for the info it helped. 

How’s the sound with cruising speeds? I’m thinking about doing the muffler tape too but heard it’s a pain to take off if I don’t like the sound. I’m not looking for something loud. My Borla muffler now is decent and louder than stock but only when you step on it. Just want to squeeze a little more with no drone.


Sent from my iPhone using Tapatalk
Posted

It dies off becouse of the ACM so its not bad. The muffler ibgot was supposed to be annoying loud but without the tape i couldnt even tell. I started with covering 1 screen at a time. I mqy have got a little ambitious by covering them all up though. I may remove 1 of the tapes. I dont have drone, and like ibsaid its not annoying at highway speeds. 

  • Like 1
Posted
It dies off becouse of the ACM so its not bad. The muffler ibgot was supposed to be annoying loud but without the tape i couldnt even tell. I started with covering 1 screen at a time. I mqy have got a little ambitious by covering them all up though. I may remove 1 of the tapes. I dont have drone, and like ibsaid its not annoying at highway speeds. 

What makes you want to remove some? And what’s ACM, not familiar with that term


Sent from my iPhone using Tapatalk
Posted

AFM sorry. I just noticed how bad my post was. The active Fuel Management system. It drops it from an 8 cylinder to 4 to save gas. I want to remove one of the tapes just to drop the noise a little. It doesnt sound so great when ideling through the neighborhood or around 35mph. Its probably becouse of the flowmaster 10 series i put on it. Here is a clip of it. Put headphones on for the actual sound. Inread that you can delete the AFM or bypass it but the dealer didnt recomend it. Not sure how much gas it actually saves. 

Posted
AFM sorry. I just noticed how bad my post was. The active Fuel Management system. It drops it from an 8 cylinder to 4 to save gas. I want to remove one of the tapes just to drop the noise a little. It doesnt sound so great when ideling through the neighborhood or around 35mph. Its probably becouse of the flowmaster 10 series i put on it. Here is a clip of it. Put headphones on for the actual sound. Inread that you can delete the AFM or bypass it but the dealer didnt recomend it. Not sure how much gas it actually saves. 

That sounds good. Any pics of the tape on the tailpipe and brand/type you used?


Sent from my iPhone using Tapatalk

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • On 2021 3500hd it consistently sets automatically when selecting park if the incline/decline is above a certain angle. 
    • Curious, did anyone ever get a fix for the vibration reported here.   I have a 2024 Silverado with 6.6 duramax.   I’m noting the same vibration resonating up through the steering shaft into the steering wheel.    Best way to describe- like someone is tapping on the steering shaft/components and it’s resonating into the steering wheel.    thanks. 
    • Hi friends - first time poster. I have a 2015 sierra Denali with 150k miles, I’m the second owner and she’s given me 75k of great service. I run a pulse AFM disable device. Starting Thursday when I exited the freeway after a short local ride it started idling rough, with an obvious misfire shake and was down on low end power.  I got it home and hooked it up to my scannner and found no codes but in live data a pretty bad misfire on cylinder 5. I replaced the coil, plug and wire with all new OE replacements (Delphi gn10165 coil, acdelco wire and 41-168 plug). It’s still behaving the same way after firing the parts cannon at it.   I know cyl 5 is a non AFM cylinder so I am not thinking this is AFM related but I’m kinda at a loss. injector? Bent pushrod? It’s running too well over 1k rpm to suggest those IMO. Has anyone chase this issue before and what was it? Any suggestions? 
    • 2017 Silverado L83 5.3l 6speed transmission Hello, not a new member but havent posted in a while and my old signup info isnt working so had to create a new account. anyways, I have an issue with my truck and hope someone can spread some light on whats happening: -when it goes to 4cyl mode it makes a clunk sound (but not when coasting or going downhill) -when in 4 cyl mode and under load it makes a load pulsating sound (not a tick). -goes away completely when in M5 gear or when plugging in an AFM delete. Im guessing it is one of 2 things but im not convinced of either to be honest. 1. lifter stuck in v8 mode 2. torque converter shudder realistically it doesn't seem like the TC as there is no physical vibration , and it never happens in v8 mode. but maybe? and wouldnt a lifter make a sound whether with load or not? any ideas let me know please. thank you!  
    • Which has made me wonder with the various engine failures of a few brands in the last few years, is it sub par materials such as lifters etc causing failures, or bearing clearances on the crank etc or perhaps bad designing of an engine physically or causing too much load on the components due to the hp/torque they can push out of them. Or is the oil viscosity and additive package of current oils or a lack of oil flow by an oil pump not able to supply sufficient oil at idle or under high load at low rpm. Or is it every item I listed that combined together has pushed the limits so far to the left that there is hardly a margin of safety left and add in some fuel dilution and too long of an OCI and premature engine failure is the result ?. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...