Jump to content

Whining/supercharger noise when RPM’s increase

aha1987
 Share

Recommended Posts

Sierra Dan Senior Enthusiast

Sierra Dan

Posted
Posted

Could be the oil pump. 

This was a common noise on the earlier 14 and 15 K2 trucks.

Possibly alternator as well.

  • 4 months later...
  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

2019SierraAT4
2019SierraAT4

I have a 2019 GMC Sierra AT4 with 6.2 liter and 10 speed auto with 33,000 miles.  It recently developed a loud whine that was tied to throttle input.  The more throttle the louder it got.  Took it to

M1ck3y
M1ck3y

Maybe trucks do take after their owners ?

Posted Images

2019SierraAT4 New Member

2019SierraAT4

Posted
Posted (edited)

I have a 2019 GMC Sierra AT4 with 6.2 liter and 10 speed auto with 33,000 miles.  It recently developed a loud whine that was tied to throttle input.  The more throttle the louder it got.  Took it to my local GMC dealer and they found it was a bad idler pulley.  They replaced the pulley and the whine is gone.

0CBB0F22-2760-44A9-8898-77D6E8242BDD.jpeg

Edited by 2019SierraAT4
  • Like 1
  • 6 months later...
ECGolfer04 Enthusiast

ECGolfer04

Posted
Posted
On 9/12/2019 at 10:46 PM, Aycock1987 said:

I am experiencing a noticeable whining noise when my RPM’s increase. It almost sounds like a supercharger. Curious to know if anyone else is experiencing this and know what it is.  I tried posting a video but it wouldn’t let me attach. 

Did they find your issue?  I believe I may have the same noise.  Slight wine, happens entire time while engine is running.  Increases with RPMs, doesn't matter if AC is running or not. Ironically, I noticed it immediately after I had my transmission fluid change, which leads me to believe it could be trans pump?  Or maybe Oil pump?  I had both done on the at the same time.  I dropped it off at the dealer but they cant seem to isolate it.  Told them I'm not picking it up until its fixed as I am nearing the end of my powertrain warranty.  Thanks.

jnissen Enthusiast

jnissen

Posted
Posted

Likely wrong fluid used. The 10 speeds had a service bulletin out on the fluid if memory serves me. I’d verify level first (no dipstick so you will have to climb under truck). If ok then I’d change it anyway. When I do trans fluid I always do a 3X drain and fill. Between each change I run through the gears and ensure torque converter has had fluid flowing through it well. Then drain and repeat.

 

GM has a power flush machine they use at the dealer. I’d avoid those if you can. A friend of mine who runs a transmission rebuild shop claims they stir up stuff and long term you have more problems.

ECGolfer04 Enthusiast

ECGolfer04

Posted
Posted
42 minutes ago, jnissen said:

Likely wrong fluid used. The 10 speeds had a service bulletin out on the fluid if memory serves me. I’d verify level first (no dipstick so you will have to climb under truck). If ok then I’d change it anyway. When I do trans fluid I always do a 3X drain and fill. Between each change I run through the gears and ensure torque converter has had fluid flowing through it well. Then drain and repeat.

 

GM has a power flush machine they use at the dealer. I’d avoid those if you can. A friend of mine who runs a transmission rebuild shop claims they stir up stuff and long term you have more problems.

Dealer supposedly checked twice to make sure correct fluid was used?  Is there a tsb on the correct fluid? 

jnissen Enthusiast

jnissen

Posted
Posted

I thought so but mostly was related to the 8 speed.

If dealer changed the fluid then I’d hold him responsible for the start of that noise.

  • 4 weeks later...
Velocity12 Enthusiast

Velocity12

Posted
Posted

My truck (2019 Sierra, 5.3, 8 speed) started making a whining sound about 3 days ago. It’s coming from under the hood for sure. I can rev it and hear it and it does it when the truck is in gear. Sounds like it’s supercharged. It also seems like it’s getting louder as the days go by. I’m going to try to bring it in next week some time. Hopefully they can figure it out. I don’t have much faith in my local dealer. 

  • 1 month later...
EricTheRed Enthusiast

EricTheRed

Posted
Posted

I got a 2020 6.2 Trail Boss that has an engine whine too. My wife and I both noticed it the other night. 

  • 2 months later...
Brian21477 Enthusiast

Brian21477

Posted
Posted

2020 LT Trail Boss 6.2L 10 Speed. I have the whine too.  I only hear it at lower RPMs while accelerating from a stop between 25-35 mph then faintly goes away.  Took to dealer at 1500 miles and they replaced the Stub Shaft on the front left wheel (this was a Bulletin for a noise only in 2wd that goes away in 4wd), didn’t solve the whining problem. 2100 miles, took it back for the whine and they replaced a bearing somewhere near the transmission pump.  They had it for 2 weeks.  When I drove it off the lot, whining noise was still there.  I took it right back to dealer and they pretty much scratched their heads!  Currently have 2800 miles on it and no impact no idea! What’s next? Lemon Law? Not sure if this will eventually turn into a recall or just a flat out safety issue that will either cause some failure while driving or just a lot more headaches to come.  GM please figure this out!

Velocity12 Enthusiast

Velocity12

Posted
Posted
On 8/27/2020 at 3:38 PM, Velocity12 said:

My truck (2019 Sierra, 5.3, 8 speed) started making a whining sound about 3 days ago. It’s coming from under the hood for sure. I can rev it and hear it and it does it when the truck is in gear. Sounds like it’s supercharged. It also seems like it’s getting louder as the days go by. I’m going to try to bring it in next week some time. Hopefully they can figure it out. I don’t have much faith in my local dealer. 

The dealer was able to fix mine, ended up being the idler pulley on the engine. 

Brian21477 Enthusiast

Brian21477

Posted
Posted (edited)
On 9/13/2019 at 1:57 PM, Wheelguy said:

Many odd noise complaints across several different topics (jingle jingle thread, squeaky belt/pulley thread, now this one).  I realize that's nothing new, particularly with a first year new platform truck.

 

I work for a large supplier to GM in the powertrain segment and I've been told just this that GM Global Propulsion Systems (GPS - formerly called Powertrain or GMPT) is investigating some noises due to metal stampings, some are heat shields on what I believe is just the 6.2L.  This may or may not be related to any of the above noise complaints/issues though I'm doubtful it's related to the jingle jingle since that seems to be pointing to the front axle stub shaft.

 

I know this isn't anything concrete or maybe not even worth posting.  Just some info that may or may not put some owners at ease.  No clue as to what specific components have been isolated by GM or where they might be, so please don't inquire further - I can't answer further because I simply don't know much more.  I wish I could just call these guys up and give them symptoms and get questions answered but that would be frowned upon by my employer, I'm sure.

 

Hang in there, guys.

Has there ever been a known fix for the engine whine yet?

Edited by Brian21477
Didn’t finish typing
Brian21477 Enthusiast

Brian21477

Posted
Posted
On 9/13/2019 at 1:09 PM, Aycock1987 said:

I noticed the noise soon as I purchased the truck. I drove my dads 2019 (identical to mine) the other day and it didn't make the whining/supercharger noise that mine makes. I currently have 3k miles on mine

Noticed mine right after I bought too.  Around 500 miles maybe.  Two dealer visits with parts replaced and 2000 miles later the noise still remains.  Irritating.  Gloat all confidence in my local dealer.

Brian21477 Enthusiast

Brian21477

Posted
Posted
On 10/1/2020 at 7:54 PM, EricTheRed said:

I got a 2020 6.2 Trail Boss that has an engine whine too. My wife and I both noticed it the other night. 

Any luck finding a fix with the engine whine?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Atlas
      Wow I'm in a pickle. (Broke down truck) and a story.

      By Atlas · Posted

      So, do I go elbow-deep on this thing or list it for sale and play dumb? Seems to "runs good."   I'm about $1200 away from having: -a rebuilt injector ($300) -a new cat ($250) -a new cat back exhaust (OE style) ($300) -a new AC compressor ($200) -AC refrigerant charge ($150)   In theory, this should rectify the obvious detracting issues from its value and operability. Cold AC with a non-squeaking AC pulley both sounds and feels good. An exhaust that isn't cut/hacked in 17 different places and doesn't vibrate on a crossmember would make it sound and feel less janky. A working cat would help the stink, and will save the earth, but *if and only if* the fuel system is working properly, which would also address the intermittent "rich" CEL.   Heard a good one... CEL for "Rich condition" means you haven't spent enough money on the truck lately, and it's letting you know.   Rebuilding the injector would seem to be the most important part. Replacing the cat would be secondary. I don't think mine is plugged or overly restricted, but it might be a little restricted? I have no good way to tell other than seat of the pants feel. I hate the smell.   The current theory is I have a rich idle problem: A bad fuel pressure regulator, or a leaking injector(s) being the highest probabilities. I already replaced the FPR but that doesn't mean its replacement isn't also bad. It was a new part from Dorman, but the packaging looked like it had been sitting on a shelf for 20 years.   This is the (single) upstream O2 sensor shown at idle. I'm getting a lot of "rich" it seems. Sometimes it stays high like that and doesn't drop down. That makes me think it's processing injector leaks or a partially stuck open injector.     Other times it looks like this. Nice oscillations between rich and lean, which is what I think it should be. Under load and at speed, the oscillations are nice and tight and uniform looking, high and low.     Fuel trims suggest the PCM is compensating pretty hard at idle to pull fuel out. But it's not enough to trip a CEL. Something about slowing to a stop: brake vaccum booster, EGR, or the EVAP purge is delayed, or there's pooled fuel in the intake again that's draining into a cylinder is enough to set the CEL. Of course, in two days of driving, it hasn't set. I was hoping to actually look at the freeze-frame data when it sets. IAT is high because it's idling on an 83 degree day here.  
    • Another JR
      Gasser Subforum Has Been Quiet - - So, Regenerative Braking and Using L10

      By Another JR · Posted

      Have considered installing a DC to DC charger in your camper to replace your isolator?  
    • newdude
      Gas fill door

      By newdude · Posted

      Common failure.  You need to replace the fuel door housing.   The painted cover transfers over to the new housing.  To remove the old one there is 4 spots where you poke the plastic to release it.  
    • newdude
      Gasser Subforum Has Been Quiet - - So, Regenerative Braking and Using L10

      By newdude · Posted

      No such thing as regenerative braking on a pure ICE vehicle.     Regenerative braking is the re-capture of energy from electric motors and stores it in the battery pack.  So hybrids, PHEV and EVs have regenerative braking.     What you are seeing is the charging system changing modes is all.  Its likely entering charge mode for some sort of reason is all.  All of the charging modes will be listed below.   As for L10 vs D.  L10 turns off automatic grade braking.  L10 puts you in control of grade downshifts where in D it will automatically do it based on brake pedal position and other factors.  Otherwise L10 and D drive exactly the same aside from that one aspect.    Battery Sulfation Mode The BCM will enter this mode when the interpreted Generator output voltage is less than 13.2 V for 45 minutes. When this condition exists the BCM will enter Charge Mode for 2–3 minutes. The BCM will then determine which mode to enter depending on voltage requirements.   Charge Mode The BCM will enter Charge Mode when ever one of the following conditions are met:   Windshield wipers are ON for more than 3 s. Climate Control Voltage Boost Mode Request is true, as sensed by the HVAC control module via serial data. High speed cooling fan, rear defogger, and HVAC high speed blower operation can cause the BCM to enter the Charge Mode. The estimated battery temperature is less than 0°C (32°F). Battery State of Charge is less than 80%. Vehicle speed is greater than 145 km/h (90 mph) A current sensor malfunction exists. System voltage is determined to be below 12.56 V When any one of these conditions is met, the system will set targeted generator output voltage to a charging voltage between 13.9–15.5 V, depending on the battery state of charge and estimated battery temperature.   Fuel Economy Mode The BCM will enter Fuel Economy Mode when the estimated battery temperature is at least 0°C (32°F) but less than or equal to 80°C (176°F), the calculated battery current is less than 15 A and greater than −8 A, and the battery state-of-charge is greater than or equal to 80%. Its targeted generator output voltage is the open circuit voltage of the battery and can be between 12.5–13.1 V. When fuel economy mode is active, the generator is not charging, only maintaining open circuit battery voltage. The BCM will exit this mode and enter Charge Mode when any of the conditions described above are present.   Headlamp Mode The BCM will enter Headlamp Mode when ever the head lamps are ON (high or low beams). Voltage will be regulated between 13.9–14.5 V.   Start Up Mode When the engine is started the BCM sets a targeted generator output voltage of 14.5 V for 30 s.   Tow/Haul Mode (if applicable) Pressing the Tow/Haul Mode button located on the center stack, the vehicle system voltage is raised and the remote (non-vehicle) battery will be charged. Having the headlamps on will raise the system voltage and if the Tow/Haul button is applied it will not serve any purpose. The voltage is regulated between 13.9-14.5 V.      
    • jaszr2
      Active Grille Delete

      By jaszr2 · Posted

      Hello from Australia Just sharing that there is now a way to delete the active shutters entirely with just a plug in module. Opens up tons of room to light bars etc.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...