Jump to content

Horn honks 3 times after I enter truck and shut door.

AJMBLAZER
 Share

Recommended Posts

AJMBLAZER Enthusiast

AJMBLAZER

Posted
Posted

For the past few weeks my truck honks every time I close the door in the morning.  I’ve had that feature disabled for months in the settings. 
 

This is annoying because I leave before 5am and I’ve got a sleeping household to not wake up. 
 

Anybody else having this issue?  Know how to fix it?

 

 

 

 

afterburner82 Enthusiast

afterburner82

Posted
Posted
1 hour ago, AJMBLAZER said:

For the past few weeks my truck honks every time I close the door in the morning.  I’ve had that feature disabled for months in the settings. 
 

This is annoying because I leave before 5am and I’ve got a sleeping household to not wake up. 
 

Anybody else having this issue?  Know how to fix it?

 

 

 

 

You leave your fob in the truck at night?  Just wondering if it is honking because it thinks you are leaving the fob in the truck.  I know my truck and my wife's car will honk if you leave a fob in the vehicle and it is shut off or you get out of the vehicle with the fob and it is still running.  I wouldn't think it would be an issue when leaving, but if you came home at 5am and left the fob in the truck.

redwngr Senior Enthusiast

redwngr

Posted
Posted (edited)

Perhaps a software update that has resulted in some settings back to default?

Edited by redwngr
AJMBLAZER Enthusiast

AJMBLAZER

Posted
  • Author
Posted

Dunno. I set it back to on when I got to work and will change it back to off later. Maybe that will stop it. 

AJMBLAZER Enthusiast

AJMBLAZER

Posted
  • Author
Posted

2nd fob is in safe in other end of the house. 
 

Where is the designated fob pocket?

remote works fine otherwise. 

Slizzo Enthusiast

Slizzo

Posted
Posted
27 minutes ago, AJMBLAZER said:

2nd fob is in safe in other end of the house. 
 

Where is the designated fob pocket?

remote works fine otherwise. 

In GM cars it's always in the center console. Not sure if '19 and up offers bench seating and moves this?

Mudcon Enthusiast

Mudcon

Posted
Posted

Have it scanned to see if any codes are in the pcm or bcm,  I had one in a few weeks ago that did that and it had a code about shifting to park or something like that I cant remember what it was.  After the tech fixed the code the horn stopped. 

EXSlider400 Senior Enthusiast

EXSlider400

Posted
Posted (edited)
1 hour ago, AJMBLAZER said:

Mine is a bench with the fold down center seat/armrest/console. 

They all have one. Those are NOT are the square spot in-between the front cup holders. It has a square pocket area inside the console. Owners Manuel shows t. 

Edited by EXSlider400
redwngr Senior Enthusiast

redwngr

Posted
Posted (edited)
On 3/6/2020 at 11:40 AM, EXSlider400 said:

They all have one. Those are NOT are the square spot in-between the front cup holders. It has a square pocket area inside the console. Owners Manuel shows t. 

Hang on...

 

The 2020 owners manual CLEARLY show that the sierras with buckets have the spot in-between the cup holders and that with the bench and fold down, it is inside the fold-down. 

 

image.png.cceacd6b86c2daaba3005126793d3f3b.png

 

image.png.20ca8e4332f7e0f94ce441295b63ecbc.png

Edited by redwngr
EXSlider400 Senior Enthusiast

EXSlider400

Posted
Posted (edited)
10 minutes ago, redwngr said:

Hang on...

 

The 2020 owners manual CLEARLY show that the sierras with buckets have the spot in-between the cup holders and that with the bench and fold down, it is inside the fold-down. 

 

image.png.cceacd6b86c2daaba3005126793d3f3b.png

 

image.png.20ca8e4332f7e0f94ce441295b63ecbc.png

Yep. Just like I said (I could have specified the jump seat console or jump seat storage). Thanks for the pics. 

Edited by EXSlider400

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,914
    Total Members
    8,960
    Most Online
    AidenVorpagel
    Newest Member
    AidenVorpagel
    Joined

  • Who's Online   2 Members, 0 Anonymous, 1,127 Guests (See full list)

  • Latest Articles

  • Posts

    • jake111
      Gasser Subforum Has Been Quiet - - So, Regenerative Braking and Using L10

      By jake111 · Posted

      Thanks newdude!  By the time manual selection is needed, I'm probably too much of a control-freak to depend on the transmission sensing braking to activate automatic downshifting.  I would be anticipating the situation and already be manually downshifting.   This truck replaced a 2004.5 LLY diesel with the Allison 5-speed.  Putting it in T/H made noticeable differences (when the torque converter locked, upshift points, downshift behavior).  On this 2024 gasser with the 10L1000 I haven't been able to detect much, if any, difference.  Ok, I can never tell now when the torque converter locks up.  But I also don't notice differences in shifting.  For downhills, I've probably already manually downshifted by then anyway.  Since it's also more awkward (than the 2004.5) to engage/disengage I don't even bother.  Or maybe it doesn't really matter with just a 3k lb. camper in the bed?   Thanks also for the list of reasons the charging system might select various voltages.  However, what I am seeing doesn't fall into any of those categories.  It very definitely, and very consistently, rises after coasting/braking.  Maybe not immediately, but not very long after coasting/braking.  Very consistently drops voltage when no longer coasting/braking.  It might also be interacting with the camper battery charging (I might disconnect the camper and see if it changes the charging behavior).  I also need to recheck turning on headlights for when I want to force it to charge the camper.   Another JR, in June I converted the camper to LiFePO4.  Since it's not a good idea to try to charge lithiums directly using truck, I installed a Victron Orion XS DC-DC charger (which BTW is AMAZING!!).  Being cheap, I only had to buy that one item (besides the battery, of course) to do the conversion.  The camper OEM 120v battery charger (only 19 years old and works perfectly) and the truck feed the input to the DC-DC charger (not at the same time).  But I didn't want the camper charger feeding back to the truck so I kept the old separator.  I considered replacing the separator with a 30amp diode but that means more work and might add another 1/2 volt drop.  One thing that surprised me was the voltage drop over the long 10awg wire run, so I can only charge smoothly at 8 amps (because the DC-DC charger is completely configurable).  Another reason I don't want an added voltage drop with the diode.  I might also be a little lazy but all this work is being done under the sink with a small cabinet opening.    
    • davester
      cam upgrade in CA

      By davester · Posted

      apparently CA smog is (or at least was)  checking that the vehicle is using the oem and/or a ca smog approved tune, so I expect you'll fail inspection doing it.
    • davester
      Possible lifter tick after DOD delete

      By davester · Posted

      yes, leaking exhaust will mess up o2 sensor readings, which in turn messes up fuel trims.
    • Grumpy Bear
      Sugar Bears 2015 GMC Terrain SLE-2 2.4 AWD

      By Grumpy Bear · Posted

      286,740 Mile Services   8/6/2026   New AC Compressor. Refrigerant oil and dye, evacuate and charge system.  New exhaust system from cat back.  New Iridium plugs plus replace #3 coil Repair/rewire headlamp wiring (passenger side) and replace all forward bulbs. Polish lenses of both assemblies.  Pull rear rotors, clean and adjust parking assembly. Inspect, clean and grease front calipers. Check pads and shoes.  4 wheel power bleed of brake system. Dot 4 Reset idle speed 50 rpm higher New Serpentine belt.    Will need new pads in the rear in about 5K more miles.    Tax Title and License out the door just short of a grand.    AC clutch had bitten the dust. 1 year warranty on the pick and save replacement. Thing will make a Polar Bear cry Uncle.  He spent quite some time on the wiring. It was in the harness and he does nothing half. I got off cheap. I have considerable more light down the road. Sylvania Silver Star replacements.  Gas seal between the porcelain and shell of plug #3 was blown, cooked the coil. That was the cold miss.  Love the new exhaust. I can sneak into the neighborhood again.  Nice to have a working parking brake again. Belle Tire never got it done. That was disappointing.    This was one of her bigger bills and still way cheaper than a payment even given the oil consumption. This thing cost me under a hundred a month in repairs and normal routine costs. What is my incentive to replace it? 🤔           
    • AidenVorpagel
      cam upgrade in CA

      By AidenVorpagel · Posted

      hello I recently bought a 2012 gmc 1500 with a 5.3 and have a AFM disabler on it I'm interested in doing a cam but I'm worried if I remove the AFM system I will fail smog does anyone have info if they are able to detect that or a work around to it (not talking about hot smogging) please let me know thank you  

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...