Jump to content

KO2s vs Ridge Grapplers - Opinions needed!


Recommended Posts

Posted

We all have opinions... share 'em! I'm wresting between these two tires. I have had K02s before on my Jeep Wrangler, before selling it to buy a Sierra Denali. They were amazing, but i am also now considering Ridge Grapplers primarily because I like the tread design and they seem to get good reviews when it comes to road noise. My main concerns are road noise and tread life. I'm pretty regular with rotations every 5k miles.

 

What experiences have you guys/gals had with each of them on your T1?

 

Posted

Ko1 and ko2 hate wet pavement. Ko1 couldn't get going, KO2 doesn't like stopping.

Overall I loved them perfect blend of off road performance and on road use. Good handling, quiet, worked REALLY well in AZ sand. Excellent grip when aired down.

Certainly isn't a KM2, but also works in ways KM2 can't.

Sent from my SM-N975U using Tapatalk

Posted
17 minutes ago, topgear1224 said:

Ko1 and ko2 hate wet pavement. Ko1 couldn't get going, KO2 doesn't like stopping.

Overall I loved them perfect blend of off road performance and on road use. Good handling, quiet, worked REALLY well in AZ sand. Excellent grip when aired down.

Certainly isn't a KM2, but also works in ways KM2 can't.

Sent from my SM-N975U using Tapatalk
 

I agree with the KO2s on wet. I live in the Pacific NW, and after 4 years on KO2s that was my biggest, but only real complaint. I put nearly 50k miles on them and swear when I sold the rig they had 30k-40k left on them. That makes it tough to steer away from them, hence the post.

Posted

I personally dislike KO2's, they look stupid and they turn into hockey pucks after half tread. It's a reason they last a long time because they get so hard after the tire wears off so much.

 

The complaints I hear with the Ridge Grapplers is sorta similar. They have a good tread pattern and sipes for about 20k miles and then they turn it's just blocks of tread. When that happens it's tougher to spread water and they tend to spin more and could make stopping worse.

 

The Terra Grappler G2's are a better tire for all around in my opinion.

Posted
I personally dislike KO2's, they look stupid and they turn into hockey pucks after half tread. It's a reason they last a long time because they get so hard after the tire wears off so much.
 
The complaints I hear with the Ridge Grapplers is sorta similar. They have a good tread pattern and sipes for about 20k miles and then they turn it's just blocks of tread. When that happens it's tougher to spread water and they tend to spin more and could make stopping worse.
 
The Terra Grappler G2's are a better tire for all around in my opinion.
All tires get hard after numerous heat cycles. Ozone damages the rubber too.

In PHX it's not uncommon to find micro cracks on sidewalls only 3 years old from the heat and the pollution. Parking in a garage helps, but it still happens.

From the moment a tire leaves the mold it starts to degrade.

The DT version on the KO2 is better about hardening up because it starts as a harder compound. It loses its 3PMS certification, but comes with a 50k mile warranty.

Personally I run winter tires in winter (Now in Alaska). All they have to do is prevent one single accident and they pay for themselves. The deductible, and subsequent years of higher insurance premium simply isn't worth it to me.

Sent from my SM-N975U using Tapatalk

Posted

the best advice I can give somebody that searching for tires is the first thing you have to do before you look at anything else to decide:
1. how long you plan to keep the vehicle?
2. where does most of your driving actually occur?

all terrains look cool but if you do 90% of your driving on the street you're going to have a better experience with the More Street orientated all terrain. Such as Michelin LTX A/T2. Loved those tires on our Avalanche 2500. Never had an issue. Worked great on our desert trails.

My Ranger got the KO then the KO2 as the tail was incredibly light and the 4.0 made gobs of torque. Never got stuck, even in Tennessee mud.

My vote goes for the KO2 because I am very familiar with the tire. If the other options that you're looking at have money back guarantees ( watch out for exchanges that require you to stay inside the same brand) then go for it.

Sent from my SM-N975U using Tapatalk

Posted

Thanks for the feedback, all. When I put KO2s on my Jeep, it was specifically for the purpose of taking it on trails, but also to have a decent pavement tire. They served that purpose on many occasions and they held up well in mud, dirt, on rocks, and tarmac. Something about a truck with touring tires makes me cringe, just doesn't look right to me. That said, @topgear1224 I get what you are saying and realistically, I can't see myself wheeling a $60k truck... so point well taken. This rig won't see trails, but it will see it's fair share of gravel and dirt roads. Ultimately, knowing myself as I do I'll still end up going with something with a but more aggressive sidewall design. I'm a sucker for exterior aesthetics.

Posted

I know this wasn’t one of your considerations, but if you want a decent paved/gravel/dirt combo, check out General Grabber AT2’s. They look better than most AT’s, not quite as aggressive on the road as KO2s. I am running them now on my ‘07 H2 and they handle a heavy truck really well. Just a suggestion to consider.


Sent from my iPad using Tapatalk Pro

Posted

I was leery of Nitto's (lack of or bad, forget) warranty on Ridge Grapplers.  Maybe look at Toyo AT3.  Same company, better tire (I've heard) and with a warranty.

Posted
9 hours ago, grrr027 said:

This rig won't see trails, but it will see it's fair share of gravel and dirt roads. Ultimately, knowing myself as I do I'll still end up going with something with a but more aggressive sidewall design. I'm a sucker for exterior aesthetics.

Whether we are willing to admit it or not, that's 95% of us, so don't let that bother you. ?

Posted

KO2’s! I’ve had them on all my trucks since 03. Never an issue. Great in snow, dry wet and last a long time. First set of the original KO’s went 130k before I sold them to a buddy!

Posted

I'm very happy with my Ridge Grapplers.  They ride good and look good.  No complaints and have had several compliments on the looks.

Archived

This topic is now archived and is closed to further replies.

  • Latest Articles

  • Posts

    • I have an Autel, works great for what it is. Can't do some specific things because you need say the GM tool, VCDS for Audi/Volkswagon and others of course. But those times are few and far between for me.   The other tool I'd like to try one day is the new Topdon scan tools. Seen several video's on them and many youtube people review them.    I've never subscribed for updates or payed to do that stuff on my Autel, so I'm sure I'm missing out on some of the updates but I'm fine with that for now.
    • I am in the market for a bidirectional scan tool so was hoping someone can help point me in the right direction. There are so many options out there it is hard to narrow down which make/model to choose.   I have always done my own vehicle work so looking to maximize capability with the scanner. Ideal price is $1k or less but would be willing to exceed if it opens up significant benefits.  Currently my 24 2500 is the newest vehicle but also have a few mid to late 2010s Subarus as well.    It seems that the Autel MP900 has a decent amount of features at a reasonable price?
    • There was talk over the last couple of years that the contract to build these trucks between GM and International would not be renewed.  International moved production of all their other trucks besides the companion CV model out of the Springfield plant some time ago when they opened their San Antonio plant.  That left Springfield only building the Silverado Medium Duty, International CV Series, and some Express/Savanna long wheelbase cutaways.  International also put the plant up for sale some time ago.  This all answered my earlier question as to why GM and International did nothing with these trucks since they were introduced, as they had basically become a market 'placeholder' with a finite life.    The Silverado Medium Duty/International CV trucks were interesting combination of a GM powertrain, electrical system, and K2XX Silverado cab with an International chassis that was supposedly designed for a step-van type vehicle they never produced.  They were manufactured in International's Springfield plant along with the IH MV series initially.  When first introduced, there was much talk that the Silverado Medium Duty/CV would eventually get a gasoline engine option along with other upgrades and GM and IH would work on a class 6/7 joint venture truck.  This was before VW bought Navistar out, after that happened no more was said.  Draw your own conclusions...   About the time talk started that the GM/IH joint venture was not going to be renewed, rumors started that GM would develop a new line of medium duty trucks themselves.  The story is the new trucks will be part of the next generation HD's due in 2028, and will still feature a 'straight rail' chassis design that the current medium duty has.  GM views this as a desirable feature that differentiates their truck from the competition.  A gasoline engine option is also expected.  As the current Silverado Medium Duty remains in production until September 2026 and there is still a lot of inventory available do not expect any official word for some time.   I believe GM remains committed to their successful partnership with Isuzu, and all the LCF models will still be available from Chevy Commercial dealers.  Isuzu is on the cusp of opening a new large plant in South Carolina and there is also speculation that this may result in new product for both Isuzu and Chevy Commercial dealers.                  
    • drive the truck back to the dealer and complain that the button works.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...