Jump to content

2021 SIlverado 3500HD Allocation and Discounts

M Parr
 Share

Recommended Posts

M Parr Enthusiast

M Parr

Posted
Posted

Good afternoon folks,

 

I'll be ordering a 2021 Silverado 3500HD which will be my first custom order. I'm trying to figure out when to approach dealers. I'm in a position to buy as soon as they can build it and get it to me but I know we are likely right at the model year switch over. Anyone have an idea of when dealers will have allocation for 2021 heavy duty trucks? Any advice on targets for pre-incentive discounts? I've traveled to purchase vehicles in the past and don't mind doing so again (or having them shipped). Any advice on the best dealers to work with on this type of thing? I appreciate any other advice you can lend. 

 

Thanks in advance,

 

MGP 

Dunn Senior Enthusiast

Dunn

Posted
Posted

laura chevrolet, theres another one in alabama, but really guys get great discounts from all over and pretty sure you can order them now for 2021......basically negotiate dealer discount at time of order but rebates and incentives are at time of delivery.....they dont know what they will be ahead of time......you can always walk away from order

Gabe Bunn Enthusiast

Gabe Bunn

Posted
Posted

I'm in Alabama, do you happen to know the dealership in Alabama? I've been looking at Laura Buick GMC in Collinsville, IL online but would rather get one closer if possible. THANKS

M Parr Enthusiast

M Parr

Posted
  • Author
Posted

Thanks for the replies. Thought you guys might find it useful to know that Silverados can be ordered now but HD models are not open yet. I found this out when working with a dealer on my build this afternoon. He mentioned that he thought things might open up next week. I didn't talk price with them yet, just got my build straight. Any opinions on % off MSRP, before incentives, that I should target? 

 

MGP

cmysstailights Enthusiast

cmysstailights

Posted
Posted
laura chevrolet, theres another one in alabama, but really guys get great discounts from all over and pretty sure you can order them now for 2021......basically negotiate dealer discount at time of order but rebates and incentives are at time of delivery.....they dont know what they will be ahead of time......you can always walk away from order
https://www.howardbentleyauto.com/

Sent from my SM-G960U using Tapatalk

Dunn Senior Enthusiast

Dunn

Posted
Posted
1 hour ago, Gabe Bunn said:

I'm in Alabama, do you happen to know the dealership in Alabama? I've been looking at Laura Buick GMC in Collinsville, IL online but would rather get one closer if possible. THANKS

i was referring to Laura in Missouri.....thats the big one i believe

M Parr Enthusiast

M Parr

Posted
  • Author
Posted

The best offer I've been able to get on a 2021 order is invoice + whatever incentives are available at the time. Fees would be 695 dealer plus tax,tag, title. This is on a 3500HD LT with an MSRP of just over 58K. Anyone seen anything better? 

john purcell Enthusiast

john purcell

Posted
Posted

When is the 2021 hd  getting made/ coming to dealers I was buying a 2020 sierra HD 3500 Denali in the spring and getting 18% off  It was out of state and I didn’t want to fly because of the virus now I don’t care about it as I already got it and 6 weeks clear and the best deal I can get from the same dealer is 10% off And I called around and it seems the same every want to talk to you i tried to order a 2021 but they give me no discounts A buddy of mine works at a Ford dealership and said it’s better to wait until they hit the lot then you’ll get a discount as opposed to ordering at this point I think I’m better waiting for the 2021 what do you guys think

Dunn Senior Enthusiast

Dunn

Posted
Posted
1 hour ago, john purcell said:

When is the 2021 hd  getting made/ coming to dealers I was buying a 2020 sierra HD 3500 Denali in the spring and getting 18% off  It was out of state and I didn’t want to fly because of the virus now I don’t care about it as I already got it and 6 weeks clear and the best deal I can get from the same dealer is 10% off And I called around and it seems the same every want to talk to you i tried to order a 2021 but they give me no discounts A buddy of mine works at a Ford dealership and said it’s better to wait until they hit the lot then you’ll get a discount as opposed to ordering at this point I think I’m better waiting for the 2021 what do you guys think

dealer discount can be negotiated at time of order but rebates and incentives are at time of delivery and no one knows what they will be

  • Like 1
Londart2020 Enthusiast

Londart2020

Posted
Posted
On 8/13/2020 at 1:15 PM, M Parr said:

Thanks for the replies. Thought you guys might find it useful to know that Silverados can be ordered now but HD models are not open yet. I found this out when working with a dealer on my build this afternoon. He mentioned that he thought things might open up next week. I didn't talk price with them yet, just got my build straight. Any opinions on % off MSRP, before incentives, that I should target? 

 

MGP

When I ordered a 2020, that got canceled, they told me which I didn’t know. When you order a truck you get “supplier pricing.” So the SLT GMC I had ordered was $77k built and supplier pricing was $71k then you get whatever rebates are offered off at the time of delivery. Some dealers may give you better, but a worse you should do is supplier.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Atlas
      Wow I'm in a pickle. (Broke down truck) and a story.

      By Atlas · Posted

      So, do I go elbow-deep on this thing or list it for sale and play dumb? Seems to "runs good."   I'm about $1200 away from having: -a rebuilt injector ($300) -a new cat ($250) -a new cat back exhaust (OE style) ($300) -a new AC compressor ($200) -AC refrigerant charge ($150)   In theory, this should rectify the obvious detracting issues from its value and operability. Cold AC with a non-squeaking AC pulley both sounds and feels good. An exhaust that isn't cut/hacked in 17 different places and doesn't vibrate on a crossmember would make it sound and feel less janky. A working cat would help the stink, and will save the earth, but *if and only if* the fuel system is working properly, which would also address the intermittent "rich" CEL.   Heard a good one... CEL for "Rich condition" means you haven't spent enough money on the truck lately, and it's letting you know.   Rebuilding the injector would seem to be the most important part. Replacing the cat would be secondary. I don't think mine is plugged or overly restricted, but it might be a little restricted? I have no good way to tell other than seat of the pants feel. I hate the smell.   The current theory is I have a rich idle problem: A bad fuel pressure regulator, or a leaking injector(s) being the highest probabilities. I already replaced the FPR but that doesn't mean its replacement isn't also bad. It was a new part from Dorman, but the packaging looked like it had been sitting on a shelf for 20 years.   This is the (single) upstream O2 sensor shown at idle. I'm getting a lot of "rich" it seems. Sometimes it stays high like that and doesn't drop down. That makes me think it's processing injector leaks or a partially stuck open injector.     Other times it looks like this. Nice oscillations between rich and lean, which is what I think it should be. Under load and at speed, the oscillations are nice and tight and uniform looking, high and low.     Fuel trims suggest the PCM is compensating pretty hard at idle to pull fuel out. But it's not enough to trip a CEL. Something about slowing to a stop: brake vaccum booster, EGR, or the EVAP purge is delayed, or there's pooled fuel in the intake again that's draining into a cylinder is enough to set the CEL. Of course, in two days of driving, it hasn't set. I was hoping to actually look at the freeze-frame data when it sets. IAT is high because it's idling on an 83 degree day here.  
    • Another JR
      Gasser Subforum Has Been Quiet - - So, Regenerative Braking and Using L10

      By Another JR · Posted

      Have considered installing a DC to DC charger in your camper to replace your isolator?  
    • newdude
      Gas fill door

      By newdude · Posted

      Common failure.  You need to replace the fuel door housing.   The painted cover transfers over to the new housing.  To remove the old one there is 4 spots where you poke the plastic to release it.  
    • newdude
      Gasser Subforum Has Been Quiet - - So, Regenerative Braking and Using L10

      By newdude · Posted

      No such thing as regenerative braking on a pure ICE vehicle.     Regenerative braking is the re-capture of energy from electric motors and stores it in the battery pack.  So hybrids, PHEV and EVs have regenerative braking.     What you are seeing is the charging system changing modes is all.  Its likely entering charge mode for some sort of reason is all.  All of the charging modes will be listed below.   As for L10 vs D.  L10 turns off automatic grade braking.  L10 puts you in control of grade downshifts where in D it will automatically do it based on brake pedal position and other factors.  Otherwise L10 and D drive exactly the same aside from that one aspect.    Battery Sulfation Mode The BCM will enter this mode when the interpreted Generator output voltage is less than 13.2 V for 45 minutes. When this condition exists the BCM will enter Charge Mode for 2–3 minutes. The BCM will then determine which mode to enter depending on voltage requirements.   Charge Mode The BCM will enter Charge Mode when ever one of the following conditions are met:   Windshield wipers are ON for more than 3 s. Climate Control Voltage Boost Mode Request is true, as sensed by the HVAC control module via serial data. High speed cooling fan, rear defogger, and HVAC high speed blower operation can cause the BCM to enter the Charge Mode. The estimated battery temperature is less than 0°C (32°F). Battery State of Charge is less than 80%. Vehicle speed is greater than 145 km/h (90 mph) A current sensor malfunction exists. System voltage is determined to be below 12.56 V When any one of these conditions is met, the system will set targeted generator output voltage to a charging voltage between 13.9–15.5 V, depending on the battery state of charge and estimated battery temperature.   Fuel Economy Mode The BCM will enter Fuel Economy Mode when the estimated battery temperature is at least 0°C (32°F) but less than or equal to 80°C (176°F), the calculated battery current is less than 15 A and greater than −8 A, and the battery state-of-charge is greater than or equal to 80%. Its targeted generator output voltage is the open circuit voltage of the battery and can be between 12.5–13.1 V. When fuel economy mode is active, the generator is not charging, only maintaining open circuit battery voltage. The BCM will exit this mode and enter Charge Mode when any of the conditions described above are present.   Headlamp Mode The BCM will enter Headlamp Mode when ever the head lamps are ON (high or low beams). Voltage will be regulated between 13.9–14.5 V.   Start Up Mode When the engine is started the BCM sets a targeted generator output voltage of 14.5 V for 30 s.   Tow/Haul Mode (if applicable) Pressing the Tow/Haul Mode button located on the center stack, the vehicle system voltage is raised and the remote (non-vehicle) battery will be charged. Having the headlamps on will raise the system voltage and if the Tow/Haul button is applied it will not serve any purpose. The voltage is regulated between 13.9-14.5 V.      
    • jaszr2
      Active Grille Delete

      By jaszr2 · Posted

      Hello from Australia Just sharing that there is now a way to delete the active shutters entirely with just a plug in module. Opens up tons of room to light bars etc.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...