Jump to content

Recommended Posts

Posted (edited)

So i just bought a 2020 2500 LTZ duramax to haul my 38 foot toyhauler. My question is what is my truck capable of pulling if i ever decided to go bigger? My door sticker is attached. I’ve seen a 2500 hauling some big campers,are they just overweight? 

DA16FB23-F41C-4869-B86E-DBE82A157316.jpeg

Edited by ultrascott
Posted

18,500 lbs for either a conventional trailer or fifth wheel is your max towing. This is my first time owning a 2500 but on my 1500 I hit my payload capacity long before I hit my towing capacity.

Sent from my Pixel 3a using Tapatalk

Posted

Can you post the sticker from your toy hauler? The number you’re going to be struggling with first would be the hitch weight taking away a lot of your payload.


Sent from my iPhone using Tapatalk Pro

Posted

Like most said, you will likely hit GVW before RGAWR or GCW.  SAE procedure is base vehicle plus 400 lbs (passenger and cargo) plus a designated hitch weight.  Conventional trailers are at 10% tongue load and fifth wheels are at 15%.  You keep raising trailer weights until you hit GVW, rgawr, or gcw.  If you carry alot of stuff in your truck or the pin/tongue weights are higher 10/15% your max trailer weights will decrease quickly.

 

#iworkforGM 

Posted

So your trailer GVWR is 11342lbs per that bottom sticker just under the VIN #.

 

If its a conventional trailer, your ideal tongue weight should be 10-15% of the weight of the trailer per GM.  So lets say you are running that trailer at 11,000lbs, you want 1,100-1,650lbs of tongue weight on the truck. 

 

If you are 5th wheel, GM says 15-25% of trailer weight for tongue weight.  So that would be 1,650-2,750lbs tongue weight at 11,000lbs trailer.  

 

GM's towing label uses the 10% number for conventional and 15% number for 5th wheel.   

Posted

Yes it’s a conventional bumper pull. I see guys pulling these toyhauler a way bigger than mine with the same truck. Are they overweight and not caring or can you increase what the truck can do

Posted

looking at the manufacturer site your dry hitch weight is 1142lb. loaded it'll be higher, but since you have more than 3000lb of payload, you're golden:

 

if you're estimating something like 1600lb loaded hitch weight and maybe 700lb people - it gives you 800lb for extra load on your truck. of course, only cat scale will gives you the right numbers.

 

 https://forestriverinc.com/rvs/toy-haulers/wolf-pack/25PACK12PLUS/1955

Posted

sorry but i'm just unknowledgeable on this stuff.so counting my hitch weight and all passengers plus whatever i'm carrying i can't go over 3196lbs?how are these guys towing these huge 5th wheels with the same truck? are they just overweight?

Posted
6 minutes ago, ultrascott said:

sorry but i'm just unknowledgeable on this stuff.so counting my hitch weight and all passengers plus whatever i'm carrying i can't go over 3196lbs?how are these guys towing these huge 5th wheels with the same truck? are they just overweight?

It depends on the actual weights ....  If you are talking about a triple axle toy hauler then it will be over the ratings of a 2500.  Something a bit more modest in size could stay below the max ratings.  Some will add airbags or change springs, but that doesn't change the legal limits.    

  • Like 1
Posted
Yes it’s a conventional bumper pull. I see guys pulling these toyhauler a way bigger than mine with the same truck. Are they overweight and not caring or can you increase what the truck can do
There's nothing you can do to increase your towing or payload. What's on the sticker is the MAX. Some people think adding 1500lb airbags increases your payload by 1500lbs but that isn't true.

Sent from my Pixel 3a using Tapatalk

  • Like 1
Posted
4 hours ago, GearHead71 said:

18,500 lbs for either a conventional trailer or fifth wheel is your max towing. This is my first time owning a 2500 but on my 1500 I hit my payload capacity long before I hit my towing capacity.

Sent from my Pixel 3a using Tapatalk
 

had the same issue.

Posted
1 hour ago, ultrascott said:

sorry but i'm just unknowledgeable on this stuff.so counting my hitch weight and all passengers plus whatever i'm carrying i can't go over 3196lbs?how are these guys towing these huge 5th wheels with the same truck? are they just overweight?

I see a lot of 5th wheels with undersized trucks in RV parks. This has become our family sport to spot them. With the power of the Duramax, it'll tow like a champ, but the first thing that any insurance company will ask you in case of a need would be to disclose the numbers. If you're overweight, you may end up without insurance coverage.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,920
    Total Members
    8,960
    Most Online
    Frank V
    Newest Member
    Frank V
    Joined
  • Who's Online   5 Members, 0 Anonymous, 1,240 Guests (See full list)

  • Latest Articles

  • Posts

    • Folks, Have a great new 2026 WT  (std cab, 2.7/4WD) w/base 40/20/40 mech adj bench "fake buckets"  (with lower and upper center console) heavy vinyl seats.  Overall the seats are very comfortable and the vinyl is heavy and appears less likely to 'split out'. Am very tall (6'5")  + a bad back/osteporosis/former hyperparathyroidism so ease/range of movement is a bit restricted.  The truck rides a bit high and I use a nerf step bar w/my left foot to step in, then I put right foot/leg in, drag my butt in  & get seated.  Worked fine in my 2018 RAM quadCab. But I end up dragging my butt over the left raised sidecushsion area of vinyl seat, and due to texture there's fair amount of traction on slide inward.  (ArmorAll didn't improve.) If the seat were even ~1/2" - 3/4" lower it'd be helpful, but base seats just have the forward/backward underseat bail and the side lever for tilt which really doesn't affect seat height.   I really don't want to 'de-puff' the left side sidecushion forming the  fake 'bucket'. I know one company sells 'seat elevator blocks':  but is there a simple way of lowering the height of the driver seat instead?   Thanks Bill W San Jose  
    • I have a basic 2026 1500 WT  (2.7L/4WD reg cab shorttbed). Comfy, generally happy with electronics/radio - but is there a way I can add switches to steering wheel right-side position (curr. empty) so I can adjust volume, push phone button to voice dial, etc? Bill W San Jose  
    • The curb weight on a 1 ton crew cab long bed is around 7k lbs.  Now, I don't know where you went to school but 9k is not more than 2x 7k lbs. More than 2x 7k lbs would be 14k+.   With that said, obviously yes you're going to feel a 9k lb trailer when slowing down.  I already said, when accelerating.  When changing lanes?  No.  But if you look at the context of what was quoted, the original person said, "after a mile or two..." which means that would be after the accelerating portion and you're driving a generally steady pace.  Please do learn to read and comprehend.
    • So I purchased the Range unit for my 2026 and I am seeing different locations suggested for the ECM . Can anyone confirm wither under hood, left side or right side or behind the wheelwell?
    • Like I've said before. Di and Carbon buildup is not that big of a concern. Engine had minimal buildup, and that engine was obviously not super well maintained. Do regular oil changes, and you're gtg as long as the rest of the truck lasts. Also, the High Pressure FP that people ****** about, but can't tell you why.  Now, I wish they'd trash the variable oil pump. No real world issues with them, but I'll gladly eat whatever miniscule MPG it's saving me in favor of more oil at all RPMs.    Curious to see his assessment of the 7.3 compared to the 6.6. I expect he'll praise the port inj, but from a structural standpoint, the 6.6 is as robust as any engine out there.    Not to take away from the 7.3. I feel it's equally as good as the 6.6.     As to heat on the rear cyls, I'd have to see numerous examples before I'd say it's an issue. Especially not knowing the history of that engine. For all is known, they could have blown a rad hose, and ran it hot, and the 2 rear cyls may be the first to get hot in a low coolant situation, but not be an issue aside from that. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...