Jump to content

Recommended Posts

Posted

I went to GMC Twitter with complaint and pictures..of course they say out of warranty..it’s not a warranty problem it’s a quality issue, my opinion.

 

Hi, Sherry. We're unable to speculate on if this can be covered under the corrosion warranty until it has been diagnosed by a dealership. The bumper-to-bumper warranty covers repairs due to defects in materials or workmanship on a vehicle. However, the factory bumper-to-bumper warranty has expired for your vehicle. 

^DG

Posted
On 9/17/2021 at 12:08 AM, 2015 High Miler said:

Same issue on my 15 summit white Sierra 

I guess it's just luck of the draw. My 2017 paint is still perfect, a friend at work has a 2014 red Z71 and his paint is perfect, still, as well.

  • 1 month later...
Posted

I have the same issue!   Sad part is Chevrolet actually fixed the issue the first time it occurred.   When I asked them to repaint the truck they said they only repair the affected area. They painted the door behind the window in the area all of the people in this thread are showing, along with above the windshield.   Fast forward a little over a year, and now the other door and sides of the front windshield are peeling.   I contacted the dealer they said they couldn't help, but recommended I speak to customer satisfaction.  I called and they responded something to the effect of  we don't make the paint, and sometimes paint only lasts three years!   They said we already fixed it for you once and there is no more money available!!   So....They admitted there is a problem, it is their responsibility....then when it occurs again,  it is not and they have no more money to help!   Really sad...I spent $55,000.00 for a truck and the paint fails in a little over 4 years!  

I have been searching for a class action attorney or pending case that has already started, but haven't located anything yet?  I am considering a small claims case, my attorney said there is a very good chance this would be the best way to go, but I can not repaint the truck for the $5000.00 limit in our state?

 

Chevrolet you should be ashamed!   I have purchased so many of your vehicles since I have been driving I can't even count them all......I have always considered myself a chevy guy......but no more, I will probably never purchase another GM product.  I was considering a new Vette, but I probably won't do it....especially since I want a white one, and you can't figure out how to make white paint last!

 

Disappointed Life Long Customer,

JD

2015 Silverado LTZ 4x4

 

 

 

  • 2 months later...
Posted

My paint is flaking off my GMC as well. I have a 2016 GMC Sierra-white in color. Mine is flaking around the window of the back drivers side door and on the hood. It appears to be a problem You would think GMC would have a recall on this or something. Especially the price you pay for them. 

  • 3 weeks later...
Posted
On 1/20/2022 at 3:56 PM, DGillespie said:

My paint is flaking off my GMC as well. I have a 2016 GMC Sierra-white in color. Mine is flaking around the window of the back drivers side door and on the hood. It appears to be a problem You would think GMC would have a recall on this or something. Especially the price you pay for them. 

Just noticed my 2015 Denali HD in summit white is doing the same thing on the driver side rear door.

I thought a turkey had taken a crap on it then I noticed it was the turkey turd tan primer gm uses and the paint evidently just flaked off over night.

Whats next?

5FB4C4AC-1A9E-477D-9E59-6C86C9D73EC5.jpeg

Posted
41 minutes ago, cperk said:

Just noticed my 2015 Denali HD in summit white is doing the same thing on the driver side rear door.

I thought a turkey had taken a crap on it then I noticed it was the turkey turd tan primer gm uses and the paint evidently just flaked off over night.

Whats next?

5FB4C4AC-1A9E-477D-9E59-6C86C9D73EC5.jpeg

I had contacted GMC corporate the dealership and really nothing..the best place at least I got some conversation was I tweeted the pics on GMC Twitter page..I sent all pics of everyone on here and they refused to take any action..it’s a shame that we plainly see I was fault on the paint line for this model and year

Posted
1 hour ago, Sherry Phillips Georgia said:

I had contacted GMC corporate the dealership and really nothing..the best place at least I got some conversation was I tweeted the pics on GMC Twitter page..I sent all pics of everyone on here and they refused to take any action..it’s a shame that we plainly see I was fault on the paint line for this model and year

Mine is parked in a shed 70% of the time! I think I’ll just take a black paint marker and write some anti gm rhetoric on the panels!!!!

Posted
2 minutes ago, cperk said:

Mine is parked in a shed 70% of the time! I think I’ll just take a black paint marker and write some anti gm rhetoric on the panels!!!!

It’s also a shame that my sons 2005 2500 SLT paint looks better than my 2015.

Posted
23 minutes ago, cperk said:

It’s also a shame that my sons 2005 2500 SLT paint looks better than my 2015.

It’s also funny that with all the gm reps on this site, all ya hear is crickets!

Posted

Think I’ll be buying a Ford next diesel I buy. I’ve already been through the oil pump pick-up tube with my 05 5.3 that I bought new. Then the 8 speed transmission  problems with my 2015 half ton that I bought new, oh which also dropped a valve on the 6.2 engine at 69k miles. Now to the 2015 Denali hd diesel I bought as a certified pre- owned which had half a foot of play in the steering when I picked it up…. So many dealer problems with that, I don’t want to type! Oh then there’s the cp4 pump crap on the $70k diesels, now the paint flying off as I drive down the road!!!!! SMDH in shame!!!

  • 4 weeks later...
Posted

Wow !!! thats the same with me peeling in the same place....GM dosnt take care of their customers at all.....paid 53000.00 for a 2014 High Country truck now a 10,000.00 truck with paint falling off ,##$%%20220301_130928.thumb.jpg.45365c77c84c4182645c55acc5a4888b.jpg20220301_130928.thumb.jpg.45365c77c84c4182645c55acc5a4888b.jpg20220301_130911.thumb.jpg.ce0e0b58e5fd9c4d38bca3a6fb7caa74.jpg20220301_133530.thumb.jpg.ccd6ef488420cee68144daeee7c7e7a3.jpg

Posted

Jesus that is awful, fortunately you could get it repainted and the body lines would make it easy to blend

Posted

Just curious, has anyone tried getting the areas that are flaking off wrapped with vinyl?  Mine is starting to flake around the passenger window so I was thinking a black vinyl would look cool to cover it.  Thoughts?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • I am in the market for a bidirectional scan tool so was hoping someone can help point me in the right direction. There are so many options out there it is hard to narrow down which make/model to choose.   I have always done my own vehicle work so looking to maximize capability with the scanner. Ideal price is $1k or less but would be willing to exceed if it opens up significant benefits.  Currently my 24 2500 is the newest vehicle but also have a few mid to late 2010s Subarus as well.    It seems that the Autel MP900 has a decent amount of features at a reasonable price?
    • There was talk over the last couple of years that the contract to build these trucks between GM and International would not be renewed.  International moved production of all their other trucks besides the companion CV model out of the Springfield plant some time ago when they opened their San Antonio plant.  That left Springfield only building the Silverado Medium Duty, International CV Series, and some Express/Savanna long wheelbase cutaways.  International also put the plant up for sale some time ago.  This all answered my earlier question as to why GM and International did nothing with these trucks since they were introduced, as they had basically become a market 'placeholder' with a finite life.    The Silverado Medium Duty/International CV trucks were interesting combination of a GM powertrain, electrical system, and K2XX Silverado cab with an International chassis that was supposedly designed for a step-van type vehicle they never produced.  They were manufactured in International's Springfield plant along with the IH MV series initially.  When first introduced, there was much talk that the Silverado Medium Duty/CV would eventually get a gasoline engine option along with other upgrades and GM and IH would work on a class 6/7 joint venture truck.  This was before VW bought Navistar out, after that happened no more was said.  Draw your own conclusions...   About the time talk started that the GM/IH joint venture was not going to be renewed, rumors started that GM would develop a new line of medium duty trucks themselves.  The story is the new trucks will be part of the next generation HD's due in 2028, and will still feature a 'straight rail' chassis design that the current medium duty has.  GM views this as a desirable feature that differentiates their truck from the competition.  A gasoline engine option is also expected.  As the current Silverado Medium Duty remains in production until September 2026 and there is still a lot of inventory available do not expect any official word for some time.   I believe GM remains committed to their successful partnership with Isuzu, and all the LCF models will still be available from Chevy Commercial dealers.  Isuzu is on the cusp of opening a new large plant in South Carolina and there is also speculation that this may result in new product for both Isuzu and Chevy Commercial dealers.                  
    • drive the truck back to the dealer and complain that the button works.
    • drive the truck back to the dealer and complain that the button works.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...