Jump to content

Gm remote start install

Gregory Krisa
 Share

Recommended Posts

Gregory Krisa Enthusiast

Gregory Krisa

Posted
Posted

 

Hi I just received gm remote start part# 22997089

 

And are curious where I'm supposed to connect the green wire at.

I want to get all this done so that when I take it to the dealer all they need to do is turn it on. I assumed the truck was wired for it already seeing the plug near the hood latch but guess not. I'm assuming it's supposed to go-to the bcm but I have no idea where that is and what pin slot.

 

Thank you. 9950c5d6ee6a9dda0f5d5ccb78c63aa7.jpg5a5b51f25b981c1bc1382a49730a3733.jpg3e4a4ed38ff6e3624bc38e6c5df1a384.jpg

 

Sent from my Pixel 4 XL using Tapatalk

 

 

 

d53c8ab91de1664f813912e54552dcdf.jpg

newdude Senior Enthusiast

newdude

Posted
Posted (edited)

You've got the wrong kit for a 2016 2500HD if that is what you are tying to install this on.  22997089 is a Chevy 1500 kit.  

 

84424016 is the Chevy kit, 84424017 is the GMC kit.  Its just remotes, a hood latch and a recalibration authorization that the dealer has to install.  You also need to make sure your truck has option code AQQ before installing.    

Edited by newdude
Gregory Krisa Enthusiast

Gregory Krisa

Posted
  • Author
Posted
You've got the wrong kit for a 2016 2500HD if that is what you are tying to install this on.  22997089 is a Chevy 1500 kit.  
 
84424016 is the Chevy kit, 84424017 is the GMC kit.  Its just remotes, a hood latch and a recalibration authorization that the dealer has to install.  You also need to make sure your truck has option code AQQ before installing.    
Ok thank you.
Yea I want to do as much as I can my self hope it lowers shop price.
[emoji1751]

Sent from my Pixel 4 XL using Tapatalk

newdude Senior Enthusiast

newdude

Posted
Posted
13 hours ago, Gregory Krisa said:

Ok thank you.
Yea I want to do as much as I can my self hope it lowers shop price.
emoji1751.png

Sent from my Pixel 4 XL using Tapatalk
 

 

Its only 1/2 hour labor for the dealer to install it.  I know our dealer is $90/hr for accessories so it may vary near you. 

  • 2 weeks later...
CamGTP Senior Enthusiast

CamGTP

Posted
Posted

A straight shot with nothing blocking the signal I can get hundreds of feet away and it still works. Works through glass too, obviously.

 

Around buildings or anything like that and it's not going to work real well.

Xshot Enthusiast

Xshot

Posted
Posted

So pretty much the same as the standard fob.

Trying to decide if the simple install of this is worth the lack of range as compared to an aftermarket unit.

Gregory Krisa Enthusiast

Gregory Krisa

Posted
  • Author
Posted

I went with the factory because of it being tied in with on star and I believe the smart start vs onstar are about the same I'll disable onstar in may

Sent from my Pixel 4 XL using Tapatalk

Xshot Enthusiast

Xshot

Posted
Posted

"AQQ" is the code needed to for this work correct? Or is it "AP8"? I've seen both come up in threads about this and can't nail down which is required. According to the AC Delco list of RPO codes they mean the same thing..

 

fd7b62c31f8b23cf4013bf8d340a9a1d.jpg

  • 1 month later...
  • 2 weeks later...
  • 2 weeks later...
Xshot Enthusiast

Xshot

Posted
Posted

Should come with fobs, and paperwork and code, and a good latch.
Any wiring should already be in the truck if you have the appropriate RPO code

  • 4 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Grumpy Bear
      OCI, not when but why?

      By Grumpy Bear · Posted

      Sad thing is that this doesn't have to be the case. LSPI can be solved without a reduction in TBN. Swap Ca for Mg.  Cats are not a issue if the OEM can get a ring and valve guide seal even at SN levels of SAPS. Dizzy is purring like a kitten with a bowl of warm milk. 200K of Full SAPS oil and zero detonation issues and nice a clean inside and out. This shouldn't be an issue. It isn't 1920.    Tell ya what AMSOIL SS is excellent at, internal cleanliness. The new formula is even a step up from their already outstanding cleanliness levels. Can't say the OEM offering is quite that clean. There marketing suggest the SS is cleaner.     That is the only defense with at shelf oil. Nothing wrong with them if you ignore the marketing and OEM 'recommended' OCI and use a thimble full of common sense. 😉 You go sir. 
    • StingerZ16
      Roll up bed cover experiences

      By StingerZ16 · Posted

      I started with a folding cover by BAK PAC on my 2500. It went bad after close to 5 years. Bent and vinyl coming loose. Contacted BAK and they gave me a very good discount on a Revolver. Had it a number of years. Mostly outdoor storage. Some garage storage. Vinyl started to come loose. Still under warranty so they replaced to cover. Sold the 2500, bought the 1500 and got another revolver for it. Had it a couple years now and no issues. I store it indoors. Got a bit of discount when buying it as well. If you are seeing problems, contact BAK or real truck and let them know. Customer service was pretty good. But I think they changed their warranty.
    • Chuck FB
      Towing In Loose Gravel

      By Chuck FB · Posted

      I agree, there is no one answer fits all as every rig is different, one may be pulling some little aluminum fishing boat while another is towing a monstrosity that weighs a lot and hopefully the owner if the rig has some prior experience to know what drive mode they should choose.    It also struck me and this is from watching a few of those boat ramp escapades videos in the past, Ford being one of the vehicles that has the auto front axle hubs and sure enough its found out that one hub has crapped out and won't engage and may not have manual hubs to even select on both sides so they are on the boat ramp stuck with no four wheel drive and spinning .... they flat out need a tow to get up the ramp and deal with the vehicles new found issues. That can happen to all brands of pickup, finding out either four wheel drive or 4 low isn't working right at the time its needed it to work as some electronic crap has failed. 
    • Chuck FB
      Towing In Loose Gravel

      By Chuck FB · Posted

      Its possible you never had the joy of the crappy boat launches we tend to have around here or really some of them are just grades down to the river if its a river scenario and the conditions change all the time with the river levels and silt deposits. Some of the lakes we went to years ago, there was no such thing as a cement pad that went down into the water that the trailer stayed on, it was gravel maybe up to the water line and then duck crap much beyond that so sinking the boat tires into mud. Of course some of the more established lakes had a cement bar type boat ramp but sometimes it was covered in green slime closer and certainly within the water and a two wheel drive had all sorts of fun if one had to touch that slime with the rear tires.    A neighbor of mine had made a comment years back with his chev truck that was probably about the same year as yours but a half ton extended cab 4x4 and he a a fiberglass boat with an inboard so it wasn't a feather weight and he had gone out to one of the large popular lakes in the area and don't ask me how this happened but he was in two wheel drive as he figured he didn't require four wheel drive for that boat ramp and somehow upon pulling the boat out he twisted one of his drive axles. I suspect it must have spun and then grabbed on the cement ramp and shocked it to the degree of twisting it. He would have had the standard 8.5 or whatever it was axle housing as the 9.5 ring gear like my truck has also has larger drive axles as far as I know. Anyway he was feeling a vibration driving home and had it checked out and a shop found that the tire/hub was wobbling because of the axle had twisted so in went a new drive axle. After that bad experience he said he made sure to put it into four wheel drive to lower the stress on the rear axle. Of course that is where an HD truck can handle a lot more stress and no doubt these newer half tons with their larger ring gears probably have larger drive axles as well to match vs back in the day. 
    • asilverblazer
      2027 GMC Sierra: Official Discussion

      By asilverblazer · Posted

      Desirable - as in does someone WANT one, aspire to have one. Could reasonably buy any car they want and CHOOSE these instead.    I didn't watch the video, why did they win?

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...