Jump to content

Recommended Posts

Posted
8 minutes ago, Jettech1 said:

I do.  I was just wondering where the bolts originated.  Like is it attached from the inside under the headliner or are the bolts visible from the topside.

They are not visible topside. My guess is the bolt would hold a clip in place and that spoiler clips onto it

  • Like 1
  • 4 weeks later...
Posted

First time posting here..but let it be known that this issue is still on the 2023s. My truck was built early February of 2023 and took delivery in late February. A few weeks back noticed water on my rear seat, cleaned it off and though it was because i opened the slider after it rained. A few days later same thing, but didnt open my slider. Then this past weekend washed my truck only to discover it was leaking on both sides. I took it to the dealer today and they confirmed the rear glass. They're going to replace it completely. Only this is, the replacement is coming from Canada..and they expect it in 2 weeks. My truck has less than 3,000 miles on it.

Posted
1 hour ago, TS423 said:

First time posting here..but let it be known that this issue is still on the 2023s. My truck was built early February of 2023 and took delivery in late February. A few weeks back noticed water on my rear seat, cleaned it off and though it was because i opened the slider after it rained. A few days later same thing, but didnt open my slider. Then this past weekend washed my truck only to discover it was leaking on both sides. I took it to the dealer today and they confirmed the rear glass. They're going to replace it completely. Only this is, the replacement is coming from Canada..and they expect it in 2 weeks. My truck has less than 3,000 miles on it.

That's not good.  I hope they get it fixed soon for you.

Posted (edited)
On 5/3/2023 at 6:19 PM, TS423 said:

First time posting here..but let it be known that this issue is still on the 2023s. My truck was built early February of 2023 and took delivery in late February. A few weeks back noticed water on my rear seat, cleaned it off and though it was because i opened the slider after it rained. A few days later same thing, but didnt open my slider. Then this past weekend washed my truck only to discover it was leaking on both sides. I took it to the dealer today and they confirmed the rear glass. They're going to replace it completely. Only this is, the replacement is coming from Canada..and they expect it in 2 weeks. My truck has less than 3,000 miles on it.

Surprised they are replacing the glass.  I just had my truck in for a leak above the rear window on both sides this past Monday.  They removed the spoiler, replaced the bolts, caulked it and reinstalled the spoiler.  Have to wait 24 after the repair to get it wet. I washed my truck yesterday and no more leaking, but did notice that they had caulk residue around the window in a few places and a few very light scratches.

Edited by shadow gray 2020 hd
  • 3 weeks later...
Posted

Update from my previous post: the rear glass was replaced last week. Im decently happy with the results..no scratched paint, no water leaking. Just need to take it back to my to tint guy and get it retinted. 

  • Like 1
  • 2 weeks later...
Posted

Same issue here.  Four separate watermarks from streaming water down the back window. Enough water that the front mats were wet, from back to front - living in the NW, so it was raining pretty crazy a week back during a longer vacation trip, but in reading this I might ask the dealership about installing solid rear window.  If they give me any confidence they can do it - hooking up rear defrost again correctly which I'm hoping still works, not damaging anything else and putting it all back together right, I'll report back.  

  • 2 weeks later...
Posted
On 6/2/2023 at 11:20 PM, NWSierra said:

Same issue here.  Four separate watermarks from streaming water down the back window. Enough water that the front mats were wet, from back to front - living in the NW, so it was raining pretty crazy a week back during a longer vacation trip, but in reading this I might ask the dealership about installing solid rear window.  If they give me any confidence they can do it - hooking up rear defrost again correctly which I'm hoping still works, not damaging anything else and putting it all back together right, I'll report back.  

This is certainly not what we like to hear, NWSierra.  Please know, customer satisfaction is extremely important to us. Our team would be more than happy to take a closer look into the concerns with your truck. To do so, please send an email to [email protected] with ATTN: NWSierra/GM Trucks in the subject line.

Please include your contact information, VIN, a brief description of your concern, and the name of your preferred dealership. We look forward to hearing from you. To learn more about GM’s Privacy Policy, please visit https://www.gm.com/privacy-statement.html. The information you provide may be monitored and recorded and is subject to the GM Privacy Statement.
 
Privacy Statement | General Motors
Your privacy is important to General Motors. This Privacy Statement addresses the personal information GM collects and how GM handles that personal information.
www.gm.com
 

Posted (edited)

Some talk here about whether this is from the window or scoop bolts. Pretty sure scoop bolts are fine for most of us - although the 15 or so bolts on the top of the cab needs to just go away in the next body/build/version, if only for piece of mind.  I don't know who thought a scoop and 15 holes on a cab would be a good idea - but amazingly they seem NOT to be the issue (at least for me). 

 

Videos were too large to attach, but you can see what I found in a couple pics below - all bolts dry, window leaking in streams from the sides, cracks, etc. you take the trim and headline off, more easily seen how the outer portions of the window tag the headliner, somewhat makes it look like the leaks are above the window.  Maybe some do have those scoop bolts leaking but mine came from 4 separate spots. Two are pictured below. 

 

IMG_2249.jpeg

IMG_2250.jpeg

 

Solid back window coming this week, through glass specialty shop.  No dealership from me, too many times I've come back to pick up my truck with ten other things broken and needing repair.  Learned my lesson there.

 

I'll start a separate sting and stop hijacking this. I need to make sure I wire up defrost right (slider has connections for each side window, solid window will just have one set), and I am curious about an overhead console that deletes the button for the rear slider.  It'd be nice to delete that button if I've gone to a solid back window.  

Edited by NWSierra
  • Like 1
Posted

yep, most leaks come from the actual frame cracking, not the bolts. I don't understand why they use a plastic frame. Using a metal frame would eliminate this. I can't see how all these warranty claims are cheaper than switching material🤦🏼

  • Like 1
Posted (edited)
On 6/17/2023 at 11:22 AM, NWSierra said:

Some talk here about whether this is from the window or scoop bolts. Pretty sure scoop bolts are fine for most of us - although the 15 or so bolts on the top of the cab needs to just go away in the next body/build/version, if only for piece of mind.  I don't know who thought a scoop and 15 holes on a cab would be a good idea - but amazingly they seem NOT to be the issue (at least for me). 

 

Videos were too large to attach, but you can see what I found in a couple pics below - all bolts dry, window leaking in streams from the sides, cracks, etc. you take the trim and headline off, more easily seen how the outer portions of the window tag the headliner, somewhat makes it look like the leaks are above the window.  Maybe some do have those scoop bolts leaking but mine came from 4 separate spots. Two are pictured below. 

 

IMG_2249.jpeg

IMG_2250.jpeg

 

Solid back window coming this week, through glass specialty shop.  No dealership from me, too many times I've come back to pick up my truck with ten other things broken and needing repair.  Learned my lesson there.

 

I'll start a separate sting and stop hijacking this. I need to make sure I wire up defrost right (slider has connections for each side window, solid window will just have one set), and I am curious about an overhead console that deletes the button for the rear slider.  It'd be nice to delete that button if I've gone to a solid back window.  

It seems some of these truck’s issues stem from the upper end options. Not to make light of any problems but that is a big reason I went with a WT(and because I’m cheap) it has a solid rear window(at least it’s factory tinted though ha) and no multi flex tailgate among other things that I’ve noticed seem to have issues. 
 

just made me think of it when you said you’re going back to a solid rear window. 
 

hopefully it fixes the issue. 
 

these trucks should not have water issues. I mean I remember when I was a kid with old 70’s and 80’s trucks they all leaked in a car wash but in 2023 in a new truck of this cost? No. 

Edited by Pryme
  • Like 4
  • 6 months later...
Posted
On 6/19/2023 at 4:41 AM, Pryme said:

It seems some of these truck’s issues stem from the upper end options. Not to make light of any problems but that is a big reason I went with a WT(and because I’m cheap) it has a solid rear window(at least it’s factory tinted though ha) and no multi flex tailgate among other things that I’ve noticed seem to have issues. 
 

just made me think of it when you said you’re going back to a solid rear window. 
 

hopefully it fixes the issue. 
 

these trucks should not have water issues. I mean I remember when I was a kid with old 70’s and 80’s trucks they all leaked in a car wash but in 2023 in a new truck of this cost? No. 

 

Went to solid rear window. really happy with it. Always liked the look even if it was less one upgrade option. The old window was a mess, cracked at the top/bottom of each "slider" section. Kind of shocking to see how bad of shape it was in - there was no amount of sealant/caulking that would have fixed that.  defrost plugged right in.  no leaks.  awesome.  

  • Like 2
Posted
On 12/25/2023 at 11:16 AM, NWSierra said:

 

Went to solid rear window. really happy with it. Always liked the look even if it was less one upgrade option. The old window was a mess, cracked at the top/bottom of each "slider" section. Kind of shocking to see how bad of shape it was in - there was no amount of sealant/caulking that would have fixed that.  defrost plugged right in.  no leaks.  awesome.  

I like the look too of the solid rear window. Looks clean. 

  • Like 2
  • 3 months later...
Posted

Welllllll update from my last post in the thread....less than a year after having the rear glass replaced for a leak on both sides, i noticed a water trail on the inside again today after a rain storm. A closer look revealed a crack in the plastic frame. Curious to see what the remedy will be after already being replaced. 

Posted
3 minutes ago, TS423 said:

Welllllll update from my last post in the thread....less than a year after having the rear glass replaced for a leak on both sides, i noticed a water trail on the inside again today after a rain storm. A closer look revealed a crack in the plastic frame. Curious to see what the remedy will be after already being replaced. 

We are sorry to hear you are still facing troubles with your 2023 Silverado and would like to investigate further for you. Please send us an email to [email protected]. Be sure to include your Username and Forum name in the subject line with additional details. We look forward to your email. 

  • 1 month later...
Posted
On 12/25/2023 at 9:16 AM, NWSierra said:

 

Went to solid rear window. really happy with it. Always liked the look even if it was less one upgrade option. The old window was a mess, cracked at the top/bottom of each "slider" section. Kind of shocking to see how bad of shape it was in - there was no amount of sealant/caulking that would have fixed that.  defrost plugged right in.  no leaks.  awesome.  

What did you do with the open/close harness now that you changed it to a solid window? Im having the same issue, water inside.  Dealer added the silicone already 4yrs ago. Thinking of going with a solid window also.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,901
    Total Members
    8,960
    Most Online
    AlVeron
    Newest Member
    AlVeron
    Joined
  • Who's Online   5 Members, 0 Anonymous, 471 Guests (See full list)


  • Latest Articles

  • Posts

    • When I was there, most to all did not have an hour meter. They just did 5000 miles on regular vehicles and 3000 on police stuff. The modern oil change monitors should take into account engine hours, weather, etc. I don`t use the monitor on my stuff. I pull the stick, look at it, smell it, rub it between my fingers, etc. That`s my oci.   I have had many engines. Some bracket race. No problems doing things my way. I was in the mechanic business for 30 yrs or so. I still do things the old school way. Don`t care who laughs at me.   Understand, I was in the main shop. We didn`t do oil changes or tires. We had a service station for that. I don`t remember the hours they used for tractors, lawn mowers, etc. Something in my head says 250 hours.
    • I don't know how far back vehicles had hour meters, be it driver accessible or diag accessible but was wondering if there was any rule of thumb your shop came up with in regards to an hour limit on engine oil regardless of the miles on the oil.    I know with construction or farm equipment its almost always based on engine hours for maintenance scheduling as no other metric really applies other than a seasonal time limit that one self imposes on items like engine oil.  
    • I'm not sure what to say on that mess but I will say that is an odd thing for that mechanic to speculate on as per assuming its been run out of oil a few times as the odds of that engine having instead piled up with a complete seizure would be very high if such events had actually taken place. However there is nothing saying that the oil has ever been changed although once again, what filter was on that engine as that would tell part of the story if its possible to figure out if its a factory installed filter or not. Too many items unknown and a lot of speculation, but regardless of that its one fubared mess that is mind boggling to see for a vehicle that new and its hard to imagine how it ever made it that far in life looking at the top of the engine.    His scanners, I've watched him before here and there and I'd have to say if I recall correctly that some of his scanning equipment is one or two steps up from a child's Exo Sketch 😋
    • I agree. That`s a LOT of sludge for 12,000 miles. I tossed that out here since this is an OCI thread. There`s tons of people here that do not post.   I used to work on a city fleet. That includes police cars and fire trucks. Lesson is, not to only use the odo for oci. A police car has a ton of hours on the engine for the miles it shows. And, not just idling, directing traffic. They beat on these things.   Course, since it is a Kia, they were gonna use the "100,000 mile warranty" for their OCI.😉
    • CLASS ACTION SUITS?  Does anyone know if there is already a class action suit for the paint - which was to have been fixed, changed in after the 2020 GM vehicles?  Does it look like this?    Just started 3 weeks ago - No help from GM as of yet - Dealer will not assist in speaking with GM on my behalf. Confirmed it is the paint they use along with the way the put it on that causes it to fail.  Clearly a Manufacturer's Defect. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...