Jump to content

Recommended Posts

Posted

I think the higher the trim, the worse the seats are. I have gone from a '21 High Country (full leather) to a '22 LTZ (partial leather) to a '24 LT (cloth), and the seats have gotten more comfortable each time. 

 

I also sat in a friends '21 1500 AT4 and his seats were rock hard, so it's not a Chevy vs GMC thing either. 

Posted

owned LT, RST and now High Country....2500s and 1500s from 2019 to 2023 and they are all the same....year or trim doesnt matter, its the same seat and yes they are very firm....I use a seat cushion partly for this and mostly cuz I am filthy from work some days

 

great trucks but the seats need more padding.....denali ultimate might have different seats not sure

Posted (edited)

I really like the seats in my 2021 SLT with the leather bucket seats option. I have done quite a few 6 hour drives in them and I get out afterwards feeling better than I would expect. 

Edited by Another JR
Posted

Went cross country towing the camper in my seats when new (500ish miles).  Ran ventilation on high the whole way.  Didn't have much problem with them being too firm, but they are firm as heck.  I'm 6'5" 255 and they work OK for me.  My 5' 100 lb wife OTOH, she sits on one of those gel butt pads.

 

Wife has a Mercedes EQE. Wish I could transplant those seats into my HD.  About to go cross-country again...

  • 4 months later...
Posted
On 6/11/2023 at 12:50 AM, Cheguy said:

You're not kidding, I thought it was me. These seats are making me have sciatic pain. I drive easily 5 hours a day and as of now thinking of putting new memory foam. If you have found a solution, please post it.  

I am 64 and these seats suck for comfort. I had a 2002 Silverado 2500hd LT diesel full leather interior and the seats were awesome but the truck rode like crap now I have a 2020 Sierra 3500 hd dually which rides great but the seats suck

Posted (edited)

I went from a 2017 regular cab LT to a 2024 crew cab w/ the LT trim. Not sure if it's more adjustment on the seat back or the seat construction, but the latter feels more comfortable. I picked it up for a dealer trade & that drive was over 6 hours & 400 miles long. I was quite happy w/ how the seat felt. 

 

A few weeks later I drove from Ontario to New Hampshire. Around 10 hours & almost 500 miles.

 

I'm 63 & 6' 2" tall. It has been a few trucks (this is #8) since I felt comfortable w/ the mid level trim seats.

Edited by revrnd
Posted (edited)

No issue with our Denali seats. VERY comfortable. Slightly better than our 2018 F-150 Lariat but those seats were very good too.

 

My theory, if you want good seats, buy the higher level trims.

Edited by bruceb58

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,902
    Total Members
    8,960
    Most Online
    whenindoubtuseahammer
    Newest Member
    whenindoubtuseahammer
    Joined
  • Who's Online   1 Member, 0 Anonymous, 310 Guests (See full list)


  • Latest Articles

  • Posts

    • are there any codes? with lots of rust, perhaps disconnect/clean both sides of the connection/examine cable ends (the wires) for corrosion going into the sheath & replace if necessary/reconnect ALL the power AND ground cables between the battery, engine, frame, cab, fuse box and starter charm.li (website) has a no-start diagnostic procedure you can work through to get it working.
    • Its no wonder you've gravitated to the oil types and brands you have in later years after trying certain brands and one being a specialty oil or at least very hard to come by up here and the other would have been a commonly found oil of the era and the vastly different outcomes as a result to using the vehicles in question the same distance for an OCI . It shows what marketing hype can do without actually having the product to back up the claims and that is no different now with the insane claims that are written on the side of a bottle of oil from some of the off the shelf oils.    What has surprised me and I was already finding this out before I bought my truck with the GDI engine, that this newer fancy technology that seemingly would suggest better fuel economy/emissions with this high pressure spray of fuel is not in reality kind at all to the engine or at least the oils life. Yet they insist on claiming long OCI with this technology just like they did with the port or similar type fuel injection systems when in reality its a step back in oil life to have a GDI system.    I think the mistake your making Grumpy is that your not sending your samples to Blackstone and getting the feel good glowing report that you can run it another 1000 or more miles and then send another sample where they say run it yet another 1000 miles and on and on it goes until your sending in something that looks a lot like road tar and then they may suggest you change your oil within the next 1000 miles 😆
    • I am guessing that engines of that design back then had a better ability to be abused and survive longer than a new design engine with the long timing chain and the overhead cams and phasers etc. But I would never guess that an engine could go that far and not fail spectacularly or at least die a slow death. 
    • In the 80's 90's I'd run Honda's 7,500 miles between changes using Red Line HP 5W20 and do it for hundreds of thousands of miles with issues. Back in the day it was an SAE 20 with the HTHS of a SAE 30 and SN add load. It was also very polar. Oxidation VOA was over 120. Besides those motors were SPFI and lean burn tech. I could have likely run it longer but never did.    We had a Toyota bought new I ran on Pennzoil's latest and greatest synthetic of the day with "Penthane". A made up word for a very low dose of PAO. Tried 7,500 mile OCI's in that Group III/VI chemistry and the rings tapped out at 90K. Rocker box wasn't as bad as the one Punch put up but it wasn't good either. Also a SPFI motor.    I'm around 3,750 across the board on these GDI monsters and the oil it tapped out by then usually on TBN/TAN crossover and color. Red Line HP Euro.    The AMSOIL SS brochures tell you to follow the OEM values for the service class but that it can be run up to 25K if monitored. I can't imagine what motor could go that distance and not tap out. I've never owned one.    Yes, I know. Lot's of people do. I'm just not going to be one of them. 
    • I knew a guy in the early 80's that bought a new Monte Carlo and ran it a 100,000 miles without ever changing the filter or the oil. Just kept adding. It looked like that inside.     
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...