Jump to content

Low Oil in Diesel Engine 6.6L

AK_ Maverick-X3
 Share

Recommended Posts

AK_ Maverick-X3 Enthusiast

AK_ Maverick-X3

Posted
Posted

Okay feeling really stupid right now, but I'm all sure we have made some kind a mistake that we should have know better. My tail is between my legs!

 

Recently changed my oil on 2016 Chevy 2500 3/4 ton. This was my second oil change since owning the truck (bought used) 5000 miles ago, now at 52,700 miles.

I changed the oil 2 weeks ago and is wasn't driven for week.

I drove approximately 100 miles and the low oil was prompted by the computer on the truck. I immediately pull off the road and check to see if the drain plug or oil filter was loose and leaking oil. No visible oil leak. I popped the hood and found there was no oil on the dip stick.

I just had just left Costco, which was in eye sight. I when back in and bought another case (6 quarts) of 5-30W. The truck took 2 1/2 quarts  of oil. I could swear that I checked the oil stick when I had originally changed oil and thought it had enough oil. I can't remember placing 10qt of oil when changing it.

Note: I have own trucks for 38 years and have always changed my own oil in the trucks. This is the first diesel truck I own and will not forget 10 Quarts the next time.

 

Questions:

Did I do any damage to the engine?

Why did the computer take so long to notice that it was low on oil?

Is there anything else I need to know?

Please do not shame to bad, feel like crap already.

 

Thank you in advance for taking the time to read my post.

Scott

 

CamGTP Senior Enthusiast

CamGTP

Posted
Posted

It'll be fine. You'd need to have less oil than that to start starving the oil pump of oil and damaging parts. Figure if anything there is probably 3 quarts of oil in that size engine going through the pump, oil passages, lifters, pushrods, valvetrain and running back into the pan at all times.

 

There must have been just enough oil in the pan that so that is was staying exactly at the low level sensor and must have just dropped below it enough times to trigger the sensor. Perhaps once the oil was nice and hot the level could drop quicker as the oil thins out.

Duramaxsky Enthusiast

Duramaxsky

Posted
Posted

You didn't hurt it at all. The add oil mark on the dipstick is 2 quarts low. The only way you could have hurt it is if you ran it at very high RPMS cold. Then the oil pump could move it faster than it could flow back. Even then it may not have been a problem. Don't waste time worrying about it.

 

Sent from my SM-A505U using Tapatalk

 

 

 

 

Duramaxsky Enthusiast

Duramaxsky

Posted
Posted

When you say low oil light was it low oil or low pressure?

Sent from my SM-T510 using Tapatalk

Duramaxsky Enthusiast

Duramaxsky

Posted
Posted

Then you didn't hurt it. Low oil pressure would be a different story.

Sent from my SM-T510 using Tapatalk

newdude Senior Enthusiast

newdude

Posted
Posted
On 12/2/2020 at 11:06 AM, AK_ Maverick-X3 said:

I live in Alaska with colder temperature.

 

5w30 is not approved weight for the 6.6 Duramax.  0w40, 5w40 and 15w40.  GM shows 5w40 for cold weather but you can probably go down to 0w40.  

Duramaxsky Enthusiast

Duramaxsky

Posted
Posted
Should the current oil in truck be changed out, or change out at the next oil change?
Oil for gas engines is different than oil for diesel engines. If it is gas engine oil then i would get it out of there. Plus the reason the high number is 40 is even in cold weather the turbo gets hot. So I would just to be safe.

Sent from my SM-T510 using Tapatalk

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,759
    Total Members
    8,960
    Most Online
    DM22
    Newest Member
    DM22
    Joined

  • Who's Online   4 Members, 0 Anonymous, 2,256 Guests (See full list)

  • Latest Articles

  • Posts

    • B14Sierra
      Cam chain tensioner question

      By B14Sierra · Posted

      So I'm in the middle of a DOD AFM delete on my 6.2 L86 Sierra. I had a pick holding the tensioner but after I got the Cam phaser gear off I was cleaning off all the rtv and apparently I didn't have the pick seated far enough in. I bumped it and the tensioner sprang forward.  I think everything is good but I want a second opinion. The top of the tensioner is just a looped piece of plastic that rides in that channel right? There is no spring or anything is there? I got the gear and chain back on and it seems tight and everything looks right. I'm hoping nothing fell out.
    • dna9656
      No low range 4 x 4

      By dna9656 · Posted

      My 2015 1500 LTZ Silverado suddenly won't go into 4 x 4 low. It will go into 4 x 4 high.
    • asilverblazer
      Transmission Woes :-(

      By asilverblazer · Posted

      Yep, just a quick reference point.    My main point being I’d do a thousand other things before I’d pay 10k for a transmission.    Speaking in ignorance cause I don’t look at these trucks, what is it worth? 20k?
    • asilverblazer
      Intermittent no-code issues on 2022.5+ V8 trucks — what did the shop fail to capture?

      By asilverblazer · Posted

      I think users are going to want to pick their monitored parameters, which parameters they want to see first.    It should probably start with baseline at a minimum and adjust to learned, but be able to overlay baseline for comparison.   A simple severity level would be able to determine what type of alerting is appropriate or user selectable.    Why not use the OBD port though?   I think a phone connection would be a good idea, push notifications type deal.   Number 1 issue is having data is useless if you don’t know what the data should be under normal conditions. 
    • Chuck FB
      summer road trips in the 2026 2500HD

      By Chuck FB · Posted

      I thought I would use your thread and add to it as I just did my first longer drive with my truck in the last couple of days. I drove from the Grande Prairie area of Alberta down to Edmonton and most of where I drove in the city was the ring road so fairly free flowing but a bit of stop and go as well in the city. Stayed the night and returned home and not too many stops along the way each way but every restart and certainly every cold start sets it back for fuel mileage. Why I say that is I see some people will cherry pick a fuel mileage leg after the vehicle had been warmed up driveline wise before hand and its a forgiving ( easy rolling drive leg for example ) and call that their fuel mileage which can give a false perception of reality. I was not heavily loaded at all but never the less the flip bak cover, rubber bed mat, various tools etc and extra jerry cans of fuel all way up to a few hundred pounds of dead weight so its not an empty truck. The cold inflation tire pressures are set more near the freezing point so once they are warmed up driving I was showing 45 front and over 40 rear and realize high inflation pressures would help a little in fuel mileage but certainly not the ride on our crap sections of highway. The weather was good so was not raining as that can really drag mileage down, in fact I had a bit of a tail wind on average driving home. Most people on here would never have driven on that freeway to visualize it but its got a fair bit of rolling type of landscape with numerous river valleys. For the most part I had it on cruise set to 62 although kicking it off if I caught it in time before it started down shifting and self braking going down the grades. Most of the more substantial grades its shifting into 7th I believe as 8th just doesn't have it. Total distance round trip was 643 miles and my overall average and I did refuel three times in all, figured out to 17.65 miles per US gallon. My best fuel mileage section refuel within all of this figured out to 18.46 and these are all hand calculated figures. I find if anything that the trucks computer can be over optimistic, sometimes its pretty close but other times its stretching it. On paper persay in theory the truck would have just about made it on fumes for that whole drive without refueling once.    Which made me think of the topic thread of the wonder if these trucks could do 20 mpg and that is a good question, certainly would have to be on an easy going flat highway, no head wind, the right temperature, not packing around a bunch of dead weight and puttering along even slower than I was I would suspect and going steady and not stopping to smell the flowers or take a piss !. It probably is possible but not without effort to attain that with the wind resistance and weight of these trucks. Of course on my drive most people are passing me if they have the power as per loaded highway tractors, never mind a lot of speedy vehicles but the speed limit is 68 and most are at or well over that. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...