Jump to content

Recommended Posts

Posted

Anybody know if the 2021 overhead console lights are better than the 19-20 models and shine towards the center console? Was thinking of changing mine to the 2021 version if they are better.

Posted
29 minutes ago, dawg99 said:

Anybody know if the 2021 overhead console lights are better than the 19-20 models and shine towards the center console? Was thinking of changing mine to the 2021 version if they are better.

Nah, they suck too. Aimed at your lap. 

  • Sad 1
Posted

I've been contemplating pulling mine apart and physically moving the LED over so it's on top of the hole instead of offset.  The LED itself is almost an inch off to the side and then has a big plastic lens that directs the light at ~45* angle

 

I'll probably debate doing this for a year or two and then next thing you know, end up in a new truck that hopefully has this fixed already :)

  • Haha 1
Posted

The interior lighting on these things is the worst in any vehicle I've had since my 76' blazer.   They are only good if you are reading something in your lap, can't see anything on the floor, glovebox, console, no hood light (I realize that's common these days) etc. 

 

I wonder if you could just remove the lens that is directing the light in a tight spot to the seat area. 

 

I did wire up a center console light under the lid, that helped a lot but really only if you are in the console.   These things absolutely need footwell lighting and lighting in the glove box.   I think I might simply do a rechargeable motion light in the glove box. 

Posted
On 1/30/2021 at 1:02 PM, todd308 said:

The interior lighting on these things is the worst in any vehicle I've had since my 76' blazer.   They are only good if you are reading something in your lap, can't see anything on the floor, glovebox, console, no hood light (I realize that's common these days) etc. 

 

I wonder if you could just remove the lens that is directing the light in a tight spot to the seat area. 

 

I did wire up a center console light under the lid, that helped a lot but really only if you are in the console.   These things absolutely need footwell lighting and lighting in the glove box.   I think I might simply do a rechargeable motion light in the glove box. 
 

2021 Custom here.  I’m attempting to add a cpl LED bolt lights to my ceiling console.  They’re very low power so I WAS going to just tap into an existing light wire. But there aren’t any light wires.  It’s a circuit board.  The LED chip is under the clear “lens”.  I’ll try to post a pic of it. I’m not sure what I’m going to do yet because with this being a circuit board and not just a light socket I do t know what actually controls the lights actions.  A computer down under the dash or that circuit board.  ????  ******.  I guess email me if you want a pic of the front and back of the upper light board. 

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,942
    Total Members
    8,960
    Most Online
    tblt44
    Newest Member
    tblt44
    Joined
  • Who's Online   6 Members, 1 Anonymous, 640 Guests (See full list)

  • Latest Articles

  • Posts

    • There was talk over the last couple of years that the contract to build these trucks between GM and International would not be renewed.  International moved production of all their other trucks besides the companion CV model out of the Springfield plant some time ago when they opened their San Antonio plant.  That left Springfield only building the Silverado Medium Duty, International CV Series, and some Express/Savanna long wheelbase cutaways.  International also put the plant up for sale some time ago.  This all answered my earlier question as to why GM and International did nothing with these trucks since they were introduced, as they had basically become a market 'placeholder' with a finite life.    The Silverado Medium Duty/International CV trucks were interesting combination of a GM powertrain, electrical system, and K2XX Silverado cab with an International chassis that was supposedly designed for a step-van type vehicle they never produced.  They were manufactured in International's Springfield plant along with the IH MV series initially.  When first introduced, there was much talk that the Silverado Medium Duty/CV would eventually get a gasoline engine option along with other upgrades and GM and IH would work on a class 6/7 joint venture truck.  This was before VW bought Navistar out, after that happened no more was said.  Draw your own conclusions...   About the time talk started that the GM/IH joint venture was not going to be renewed, rumors started that GM would develop a new line of medium duty trucks themselves.  The story is the new trucks will be part of the next generation HD's due in 2028, and will still feature a 'straight rail' chassis design that the current medium duty has.  GM views this as a desirable feature that differentiates their truck from the competition.  A gasoline engine option is also expected.  As the current Silverado Medium Duty remains in production until September 2026 and there is still a lot of inventory available do not expect any official word for some time.   I believe GM remains committed to their successful partnership with Isuzu, and all the LCF models will still be available from Chevy Commercial dealers.  Isuzu is on the cusp of opening a new large plant in South Carolina and there is also speculation that this may result in new product for both Isuzu and Chevy Commercial dealers.                  
    • drive the truck back to the dealer and complain that the button works.
    • drive the truck back to the dealer and complain that the button works.
    • I have a 2026 2500 HD Ultimate. My phone app says there’s a software update available. It’s something about improved battery management and something to do with the running boards. I follow the instructions for the update but the “Check for Updates” option is greyed out in my settings menu. Has anyone else seen this? How did you resolve it? The help message just says “see your dealer” if the download doesn’t work. I’m just trying to save a trip. 
    • Fuel mileage?  That's all how you use your right foot.  Exhaust will give you sound.   Stock exhaust 5.3 is 2.75" diameter piping.     If the truck is nice and worth putting some $$ into it, I'd go for a Corsa catback.  I had one on my 2019 old body 5.3 and it was just perfect.  Zero drone, just driving around and cruising on the highway you'd think it was stock, but when you opened it up it was like a Camaro with the factory dual mode.  Corsa bumps their catback to 3in diameter.  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...