Jump to content

2018 vs 2019 Sierra Denali

2015 High Miler
 Share

Recommended Posts

2015 High Miler Enthusiast

2015 High Miler

Posted
  • Author
Posted

OTR, this is a def option for me.  I am not driving as much as I once was pre-COVID so keeping it and doing a complete tune up/upgrade may been smart.  I used to drive 5-6000 a month but now I am at 25-3000. 

 

This whole process started because I started adding up the tune-up/maintenance/repair costs and I thought that would be a great down payment on something newer with less miles, and a moonroof with 22's.  LOL 

 

To your point about values, Im seeing 100,000+ miles for sale at 31,000!   8-/  

lmentzel Enthusiast

lmentzel

Posted
Posted

This is such a no brainer..

 

Why on gods earth would you buy first year production on anything these days.

 

Always buy the last year in a production cycle. Then the bugs are worked out.. and NOT by you! If there is a reoccurring problem there will likely already be a solution you don’t need to wait long for.

 

The 2018 is the last year in that production cycle.. Then 2019 is totally new everything. Exactly why I bought a 2018!

 

Get the 2018 for smokin deal especially if it still has warranty. Hopefully it has the “whoa is me” chevy shake so you can get an even better deal.

 

Then go get the garbage trans fluid changed for $200 and away you go.

 

They are ALL going to have a handful of problems. So get the one that already has the solutions too..

  • Like 1
lmentzel Enthusiast

lmentzel

Posted
Posted
Yes, I work very hard for the money, but I have to be cognizant of cost.  The 19+ are $10-15,000 more and I have a daughter  getting married next year (surprise) plus 3 other daughters. LOL  I may just hang on to what I have for the time being. 
My 15 has the GM clunk in the shift at times but I have gotten used to it I guess. I also have an for intune 2 and have dialed in the shift fairly well.  
 
To the Chevy shake and other issues, it always concerns me buying an older low mileage vehicle like what I am looking at.  Did they just not drive much and trade every 3-4 years or was it a buyback or was there something wrong with it and they just got rid of it...I would asume they would have to note its a buyback but that doesn't mean they do.
 
The used 19's are not are not that far off from a new 2021s. Used 19's are $55-60,000.  New 21's are $60-68,000.  Used 18's are $43-47,000  and not many at 43. Most are $45-47.  These are all Denali's. 
 
 

Also my down shift clunk in 2011 went away after installing Range AFM disable module. It was clunking on decel. I think ECU gets confused when going to 4 cycl mode and decelerating and down shifting. Once it was locked in v8 mode it is SO much better. I am at 180k miles on my 2011 5.3 6 speed.

Wife love love loves her 18’ Denali. Heated steering wheel is a chick magnet for sure. She would sell me to keep it.
2015 High Miler Enthusiast

2015 High Miler

Posted
  • Author
Posted

Not sure asking here has had any benefit as there are opposing views in both directions.  LOL what else could I excect by asking a generic question on an internet forum!  

 

I do appreciate the feed back.  Looking at a couple more trucks this weekend so i may be back with more questions....

TNTSierra Senior Enthusiast

TNTSierra

Posted
Posted
On 4/3/2021 at 1:38 PM, lmentzel said:

This is such a no brainer..

 

Why on gods earth would you buy first year production on anything these days.

 

Always buy the last year in a production cycle. Then the bugs are worked out.. and NOT by you! If there is a reoccurring problem there will likely already be a solution you don’t need to wait long for.

 

The 2018 is the last year in that production cycle.. Then 2019 is totally new everything. Exactly why I bought a 2018!

 

Get the 2018 for smokin deal especially if it still has warranty. Hopefully it has the “whoa is me” chevy shake so you can get an even better deal.

 

Then go get the garbage trans fluid changed for $200 and away you go.

 

They are ALL going to have a handful of problems. So get the one that already has the solutions too..

You can have your 2018!  I had one and it’s 8 speed with 6.2L combo was complete garbage. I also had a 2016 with the wonderful Chevy Shake. Not fun to deal with. Thank goodness it was bought back by GM. 
 

My 2019 High Country with 10 speed and 6.2L is better in every way. And I’ve had about zero issues with mine other than the rear window leak which was fixed with 200 miles on it and I now have 16k and not a drop leaks 🤞.  It’s also made on June of 2019, so it is very close to a 2020. A lot of the bugs I believe were worked out of it, compared to the trucks made in late 2018 and early 2019. 

redwngr Senior Enthusiast

redwngr

Posted
Posted (edited)
On 4/3/2021 at 1:49 PM, 15 hi miler said:

OTR, this is a def option for me.  I am not driving as much as I once was pre-COVID so keeping it and doing a complete tune up/upgrade may been smart.  I used to drive 5-6000 a month but now I am at 25-3000. 

 

This whole process started because I started adding up the tune-up/maintenance/repair costs and I thought that would be a great down payment on something newer with less miles, and a moonroof with 22's.  LOL 

 

To your point about values, Im seeing 100,000+ miles for sale at 31,000!   8-/  

3000/month is still a LOT of miles per year -- compared to average / typical users.

 

I guess I'm biased because I'm happy with mine, but that seems like a perfect application for the 3.0L/10 speed. 

 

Edited by redwngr
Nitrousbird Enthusiast

Nitrousbird

Posted
Posted

I've decided to make the upgrade as well.  I have an '18 SLT Premium Plus with the 6.2L.  It was as close to a Denali Ultimate that you could get without getting one - I then did then the Denali cluster (which in the '19+ is the AT4 and Denali cluster) and wheels to get it that much closer.  

 

The '19+ trucks have a lot more toys available than the '14 - '18 trucks  For me, I'm fine with the cab room, ride, power, etc. on my '18 - heck, if it wasn't for the stupid money being offered on newer, low mileage vehicles like mine, I'd just keep it.  But the newer ones are nicer for sure.

 

No complaints about the 8-speed, though.  I had the shudder issues and the dealer flushed it with the new fluid that totally resolved the issue.  After looking at the '21 Denali and AT4, I like the AT4 better.  I think it looks better and I won't complain that is is cheaper.  Only difference is all the chrome and fake wood I don't like, Mag Ride I have very mixed feelings about, and power running boards I could always add later (and likely would).

One downside is the tonneau covers for the '19+ are differnet, so my $1000 Undercover Ultra Flex won't transfer over.  Unless I get more for trade, I'm pulling that and selling it but will lose my butt on it I'm sure.  Catch can is different between the 6.2 motors, so that will be sold as well.  I expected to keep her for several more years - who would have thought I would be getting offers for more than I paid for it new 2.5 years later?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • bwiese
      on-wheel cellphone control: 2026 1500 WT (2.7L 4WD std cab)

      By bwiese · Posted

      I have a basic 2026 1500 WT  (2.7L/4WD reg cab shorttbed). Comfy, generally happy with electronics/radio - but is there a way I can add switches to steering wheel right-side position (curr. empty) so I can adjust volume, push phone button to voice dial, etc? Bill W San Jose  
    • Tyler Gibbs
      Travel Trailer 2024 2500 HD 6.6 Gas Engine ?

      By Tyler Gibbs · Posted

      The curb weight on a 1 ton crew cab long bed is around 7k lbs.  Now, I don't know where you went to school but 9k is not more than 2x 7k lbs. More than 2x 7k lbs would be 14k+.   With that said, obviously yes you're going to feel a 9k lb trailer when slowing down.  I already said, when accelerating.  When changing lanes?  No.  But if you look at the context of what was quoted, the original person said, "after a mile or two..." which means that would be after the accelerating portion and you're driving a generally steady pace.  Please do learn to read and comprehend.
    • sFrank
      2026 Silverado Range AFM DFM ECU loaction

      By sFrank · Posted

      So I purchased the Range unit for my 2026 and I am seeing different locations suggested for the ECM . Can anyone confirm wither under hood, left side or right side or behind the wheelwell?
    • No F-bdy Bs
      Dave's Auto (custom engine builder) tear down of L8T

      By No F-bdy Bs · Posted

      Like I've said before. Di and Carbon buildup is not that big of a concern. Engine had minimal buildup, and that engine was obviously not super well maintained. Do regular oil changes, and you're gtg as long as the rest of the truck lasts. Also, the High Pressure FP that people ****** about, but can't tell you why.  Now, I wish they'd trash the variable oil pump. No real world issues with them, but I'll gladly eat whatever miniscule MPG it's saving me in favor of more oil at all RPMs.    Curious to see his assessment of the 7.3 compared to the 6.6. I expect he'll praise the port inj, but from a structural standpoint, the 6.6 is as robust as any engine out there.    Not to take away from the 7.3. I feel it's equally as good as the 6.6.     As to heat on the rear cyls, I'd have to see numerous examples before I'd say it's an issue. Especially not knowing the history of that engine. For all is known, they could have blown a rad hose, and ran it hot, and the 2 rear cyls may be the first to get hot in a low coolant situation, but not be an issue aside from that. 
    • Donstar
      Navigating senior years.

      By Donstar · Posted

      "Life is getting back to normal."    I'm driving again and all new joints are operating as expected for this stage of recovery.   My most recent joint replacement still requires a lot of attention but experience has taught me that time will quiet the remaining pain.  I joked with my surgeon that another joint replacement would take my mind off my most recent surgery and he responded by saying the next will be a hip!  There are no plans for another surgery but, unlike me, I don't think he was joking!  I certainly wouldn't refuse further replacement  if required but hope to spend time out of the "post-op"  period.  I can't stress enough that if you have been recommended for total hip, knee or shoulder replacement that you welcome the offer.  Post-op "recovery" may sound daunting and painful, however, this is far better than the insidious erosion of mobility you are currently experiencing.  Imagine what it would feel like to wake up most mornings feeling better and more mobile than you did the previous day!  Prior to my first surgery in June 2025, even getting out of bed was becoming a formidable task.  Since the day after my first surgery, I get out of bed everyday easily and unassisted.  Making the switch to feeling a little better each day rather than a little worse, is hugely motivating!

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...