Jump to content

Wiper Blades?

Coz
 Share

Recommended Posts

Coz Enthusiast

Coz

Posted
Posted

Where is everyone getting wiper blades? I'm trying to buy some off  OEM Parts site and it's over $53 for two friggin blades! The dang arms are made so that you have to use their blades. Has anyone come up with another solution to this mess? Thanks!

btj_z71 Enthusiast

btj_z71

Posted
Posted
5 minutes ago, Coz said:

Where is everyone getting wiper blades? I'm trying to buy some off  OEM Parts site and it's over $53 for two friggin blades! The dang arms are made so that you have to use their blades. Has anyone come up with another solution to this mess? Thanks!

If you want the best, go for the Bosch Icon.  They will last much longer than other brands and the cost is well justified for the quality.  I use these exclusively after the stock blades wear out.

 

If you are not all that concerned about quality and just need something to get the job done, get whatever the local parts store has on sale instead of OEM.  That'll save you some cash.

Coz Enthusiast

Coz

Posted
  • Author
Posted

What I am asking about is the odd wiper arms have a specific squared end that doesn't fit typical blades found everywhere. It has a square end that only matches up to original GM Blades. I'm hoping there is a better source for them than paying over $50 for 2 dang blades!

Coz Enthusiast

Coz

Posted
  • Author
Posted
1 minute ago, btj_z71 said:

If you want the best, go for the Bosch Icon.  They will last much longer than other brands and the cost is well justified for the quality.  I use these exclusively after the stock blades wear out.

 

If you are not all that concerned about quality and just need something to get the job done, get whatever the local parts store has on sale instead of OEM.  That'll save you some cash.

Thanks, I don't mind paying for good ones. I just don't want to pay GM premium prices for standard type blades. The wipers and arms look great but DANG! 

GrumpyAeroGuy Enthusiast

GrumpyAeroGuy

Posted
Posted
If you want the best, go for the Bosch Icon.  They will last much longer than other brands and the cost is well justified for the quality.  I use these exclusively after the stock blades wear out.
 
If you are not all that concerned about quality and just need something to get the job done, get whatever the local parts store has on sale instead of OEM.  That'll save you some cash.
My experience with Bosch blades has not been positive. Low life and horrible streaking after a short time....

Maybe I should try them again, but the last set I had weren't noteworthy at all.

Sent from my LM-G710 using Tapatalk

Coz Enthusiast

Coz

Posted
  • Author
Posted
1 minute ago, GrumpyAeroGuy said:

The blade I posted above does have the GM bayonet mount...

Sent from my LM-G710 using Tapatalk
 

OK, great, The picture doesn't look like it but I will certainly check them out! I have an Advanced Auto Store close by.

GrumpyAeroGuy Enthusiast

GrumpyAeroGuy

Posted
Posted
OK, great, The picture doesn't look like it but I will certainly check them out! I have an Advanced Auto Store close by.
There is an adapter clip that is in the package, snaps over the blade mount, and clips right on our trucks.

Worked well on my truck.

Btw, I agree, sometimes I wish GM would try not to be as "special" on this kind of stuff.

Sent from my LM-G710 using Tapatalk

Coz Enthusiast

Coz

Posted
  • Author
Posted
1 minute ago, GrumpyAeroGuy said:

There is an adapter clip that is in the package, snaps over the blade mount, and clips right on our trucks.

Worked well on my truck.

Btw, I agree, sometimes I wish GM would try not to be as "special" on this kind of stuff.

Sent from my LM-G710 using Tapatalk
 

I see that now doing more research that there are several adapters in the package. Good deal! Thanks very much everyone for your help.

Vicarod Enthusiast

Vicarod

Posted
Posted

I get all my blades from Rock Auto.  Much cheaper even when shipping is included.  They sell most of the name brands.

IE: Trico neo-form 16-2213 is only $6.91 plus shipping. 

     Shipping for a pair of blades is $7 to my location.  I suspect other locations are similar.

     Shipping doesn't increase much with additional blades. 

  

That same blade is listed in another post for $21 (pre coupon cost)

  • Like 1
rav3 Senior Enthusiast

rav3

Posted
Posted
2 hours ago, Coz said:

Where is everyone getting wiper blades? I'm trying to buy some off  OEM Parts site and it's over $53 for two friggin blades! The dang arms are made so that you have to use their blades. Has anyone come up with another solution to this mess? Thanks!

I bought my last ones off Amazon, worked & fit fine.

 

https://www.amazon.com/gp/product/B082VQ7MV1/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1

  • Like 1
BigBlue2014 Enthusiast

BigBlue2014

Posted
Posted

I use ACDelco 8-902215 on my truck - They fit perfect and last a long time through many different seasons in the North East.

GrumpyAeroGuy Enthusiast

GrumpyAeroGuy

Posted
Posted
I use ACDelco 8-902215 on my truck - They fit perfect and last a long time through many different seasons in the North East.
I agree. I have used those as well with no complaints. Around here, the dealers crank those up in price, so I go the anco route.

Sent from my LM-G710 using Tapatalk

BRV New Member

BRV

Posted
Posted

I recently put on a set of Rain-X wipers.  They have a universal mounting system where all of the adapters are on the blade already and you peel off adapters until you get down to the one that fits your vehicle.  I don't like how they look, with the big pile of adapters on it.  The originals were much lower profile.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • C/K Man
      Silverado 4500-5500-6500 are they still being produced? Would have sold better as GMCs as well

      By C/K Man · Posted

      There was talk over the last couple of years that the contract to build these trucks between GM and International would not be renewed.  International moved production of all their other trucks besides the companion CV model out of the Springfield plant some time ago when they opened their San Antonio plant.  That left Springfield only building the Silverado Medium Duty, International CV Series, and some Express/Savanna long wheelbase cutaways.  International also put the plant up for sale some time ago.  This all answered my earlier question as to why GM and International did nothing with these trucks since they were introduced, as they had basically become a market 'placeholder' with a finite life.    The Silverado Medium Duty/International CV trucks were interesting combination of a GM powertrain, electrical system, and K2XX Silverado cab with an International chassis that was supposedly designed for a step-van type vehicle they never produced.  They were manufactured in International's Springfield plant along with the IH MV series initially.  When first introduced, there was much talk that the Silverado Medium Duty/CV would eventually get a gasoline engine option along with other upgrades and GM and IH would work on a class 6/7 joint venture truck.  This was before VW bought Navistar out, after that happened no more was said.  Draw your own conclusions...   About the time talk started that the GM/IH joint venture was not going to be renewed, rumors started that GM would develop a new line of medium duty trucks themselves.  The story is the new trucks will be part of the next generation HD's due in 2028, and will still feature a 'straight rail' chassis design that the current medium duty has.  GM views this as a desirable feature that differentiates their truck from the competition.  A gasoline engine option is also expected.  As the current Silverado Medium Duty remains in production until September 2026 and there is still a lot of inventory available do not expect any official word for some time.   I believe GM remains committed to their successful partnership with Isuzu, and all the LCF models will still be available from Chevy Commercial dealers.  Isuzu is on the cusp of opening a new large plant in South Carolina and there is also speculation that this may result in new product for both Isuzu and Chevy Commercial dealers.                  
    • davester
      push to talk button

      By davester · Posted

      drive the truck back to the dealer and complain that the button works.
    • davester
      push to talk button

      By davester · Posted

      drive the truck back to the dealer and complain that the button works.
    • nfisherman
      Software Update

      By nfisherman · Posted

      I have a 2026 2500 HD Ultimate. My phone app says there’s a software update available. It’s something about improved battery management and something to do with the running boards. I follow the instructions for the update but the “Check for Updates” option is greyed out in my settings menu. Has anyone else seen this? How did you resolve it? The help message just says “see your dealer” if the download doesn’t work. I’m just trying to save a trip. 
    • newdude
      Exhaust Question

      By newdude · Posted

      Fuel mileage?  That's all how you use your right foot.  Exhaust will give you sound.   Stock exhaust 5.3 is 2.75" diameter piping.     If the truck is nice and worth putting some $$ into it, I'd go for a Corsa catback.  I had one on my 2019 old body 5.3 and it was just perfect.  Zero drone, just driving around and cruising on the highway you'd think it was stock, but when you opened it up it was like a Camaro with the factory dual mode.  Corsa bumps their catback to 3in diameter.  

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...