Jump to content

Auto Stop/Start discontinued on most V8 / 10 speeds

redwngr
 Share

Recommended Posts

Z45 Senior Enthusiast

Z45

Posted
Posted

I wish I could get someone (professional no not diy'r) to install that on my truck. I talked with a local auto electronics installer and he has some issues with installing any disabling devices like this, so no way.  

 

Its a younger mans job and I cannot handle it. 

Guest

Guest

Posted
Posted
50 minutes ago, elcamino said:

I wish I could get someone (professional no not diy'r) to install that on my truck. I talked with a local auto electronics installer and he has some issues with installing any disabling devices like this, so no way.  

 

Its a younger mans job and I cannot handle it. 

 

 

Its pretty simple but I can see how it could look overwhelming. If you were closer to me I would have done it for you. Maybe you can find someone local in here that can do this for you 👍

eppieguy Senior Enthusiast

eppieguy

Posted
Posted
54 minutes ago, elcamino said:

I wish I could get someone (professional no not diy'r) to install that on my truck. I talked with a local auto electronics installer and he has some issues with installing any disabling devices like this, so no way.  

 

Its a younger mans job and I cannot handle it. 

I'm 55 and did it with no issues, really pretty simple. 

pokismoki Senior Enthusiast

pokismoki

Posted
Posted
On 6/28/2021 at 5:38 AM, Mudcon said:

It will be back after the shortage.  For now its the same reason they are taking away HD radio for a while. 

HD radio, lol another joke product, poor reception the channels are spin offs of the main channel to be sold for as mexican, asian and armenian  radio,  or AM channels jumping over to FM.  

 

XM put the nail in the HD radio coffin

Z45 Senior Enthusiast

Z45

Posted
Posted (edited)
Quote

I'm 55 and did it with no issues, really pretty simple.

I take Brilinta so a cut will cause a lot of bleeding etc......

 

"Brilinta may cause you to bleed more easily, which can be severe or life-threatening. Avoid activities that may increase your risk of bleeding or injury."

Edited by elcamino
GJR1212 Enthusiast

GJR1212

Posted
Posted
On 6/12/2021 at 4:47 PM, redwngr said:

KL9    Automatic Stop/Start
1 -  Included and only available with (L3B) 2.7L Turbo engine. 
2 -  Standard on vehicles built before 6-7-2021. Most vehicles built on or after 6-7-2021 that are equipped with a V8 engine and (MQB) 10-speed automatic transmission will have (NSS) Not Equipped with Automatic Stop/Start, which removes Automatic Stop/Start and its content. See dealer for details.

 

 

    NSS    Not Equipped with Automatic Stop/Start, see dealer for details
1 -  Most Vehicles built on or after 6-7-2021 with a V8 engine and (MQB) 10-speed automatic transmission will have (NSS) Not Equipped with Automatic Stop/Start, which removes Automatic Stop/Start and its content. 

 

 

Do you know if this applies also to the LM2 3.0 diesel with 10 speed transmission?    I love to get rid it on my truck.

redwngr Senior Enthusiast

redwngr

Posted
  • Author
Posted
8 hours ago, GJR1212 said:

Do you know if this applies also to the LM2 3.0 diesel with 10 speed transmission?    I love to get rid it on my truck.

AFAIK the 3.0 will still have auto stop/start. 

(all 3.0 get the 10 spd)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Z45
      Fluid Change Questions

      By Z45 · Posted

      I would be surprised if the diff's were not filled (with the cheapest gear lube) at the axle factory before being shipped to GM.  If you ever watched them building trucks they install the axles and all suspension parts with the frame upside down and then turn it over before its time to install the engine.     Too much gear lube in a axle can be worse than not enough especially with a lower quality GL where is get whipped up with entrained air (foam)  weakening its ability to lubricate.        
    • MORSNO
      Oil Consumption

      By MORSNO · Posted

      This is the 6.6 gasser section of the forum, you should either delete or modify your previous post as it is misleading for anyone looking for factual information on their 6.6 gas engine.
    • Atlas
      Wow I'm in a pickle. (Broke down truck) and a story.

      By Atlas · Posted

      Well....I've done my first intake gasket. Probably wrong, but...we'll see?   Ultra black on the china walls and 1/4" up onto the sides of the intake gaskets. Permatex High Tack (couldn't find Gaskachinch) on the head side of the intake gasket. I read wrong and it says you're supposed to put it on the mating surface of the head, not the gasket. Hoping it's like a PB&J sandwich where it doesn't matter what side the PB goes on so long as there's jelly. That crap is messy/sticky and I got a dab or two on the intake port openings, tried to wipe it off. Hopefully it won't be a big deal and will only aid in sealing.   Per instructions I left the intake (top side) of the gasket dry except for a light smear of RTV around the coolant ports. Wiggling the intake in there was a bear but I had help to free me of surrounding wiring/stuff but I was basically able to set it straight down lined up with the bolt holes.   I did not think to wait until the RTV skinned over but there probably was 5-10 minutes while it sat before installing the intake.   Bolts finger tight first. Then, followed the Chilton's manual pattern to snug them to 15 lb-ft.   Waited a little over an hour, and then did the final torque in sequence again to 35 lb-ft.   Yesterday I replaced the fuel pressure regulator and got my new "nut and bolt kit" (fuel lines) installed. Damn GM used security torx on the spider, which I don't have, so I got scammed at the local HW store for an off-brand security Torx bit set.   The new driver's door mirror arrived yesterday, so, there's a chance this thing could be running and road legal tomorrow? I don't want to get my hopes up.   This will be my first time stabbing a distributor, too. Although, lucky me, someone else marked the old distributor for removal previously, I did see that. (Someone's been here before!!). Engine is still at TDC so it *should* be just a matter of transferring the mark to the new dizzy and rotating it into place.
    • KARNUT
      2027 GMC Sierra: Official Discussion

      By KARNUT · Posted

      He has his dad’s newer truck he’s put away. He has several old cars he rotates between him and his family. I’ve seen a restored square body and a SS Chevy truck he’s sometimes drives. He did raffle off a new suburban recently. As much as he is watched if he drove new stuff as a rule we’d know it. It would be fine by me. I don’t care what people prefer. I got one more new one in me. I’d rather my wife get one. I can’t get her out of the Genesis. Don’t tell anyone. I want her to get an electric truck. I want to put a generator in the back. Just because. She hasn’t bit yet.
    • Atlas
      2027 GMC Sierra: Official Discussion

      By Atlas · Posted

      Yes, you must have seen my thread on the Blazer. HOT GARBAGE, but I love them anyway. I'm convinced every car guy has a soft sport for an S/T series somewheres. Probably even a Panther too, if I'm being an honest car guy. That doesn't mean they aren't junk. And they definitely don't get better with age. I sometimes play with old cars, but that's by choice. I don't rely on them and they aren't my everyday fleet.   Derek plays the common man on Youtube and that's no doubt where he started. Now he has Youtube money (and Motortrend, etc). You think his crews and his wife ride around in old beaters when they're chasing him and his wrecks across the country? No he's got newer and nicer stuff for that, you'll see glimpses of it in the footage.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...