Jump to content

Recommended Posts

Posted

I'm looking for a seat protector that is easy to take on/off as I will only use it when we are travelling with the dogs. Hammock is not necessary as we have small dogs that ride in seats but they still get drool and hair everywhere. I was forever cleaning my Tahoe seats, trying to be a little proactive this time. I have found lots of them but I'd really like one in a camo pattern and they seem to be few and far between, hoping someone might know of something I may have missed. Northwest has some but won't get delivered for a couple of weeks and we will likely be taking the new truck on a road trip with the dogs before then so looking for something with a fast ship time as well.

Posted
4 hours ago, EagleRising said:

I have this in my 2019 and it's been perfect

 

Check this out at Amazon BarksBar Luxury Pet Car Seat Cover with Seat Anchors for Cars, Trucks and SUVs - Black, Water Resistant, Nonslip Backing - Bench Seat & Hammock Convertible https://www.amazon.com/dp/B01LYZLKE8/ref=cm_sw_r_apan_glt_fabc_9HGFNNP14DP5NPXR8J08?_encoding=UTF8&psc=1

I've got that for my crew cab. Completely covers the seat and cleans up easily. Has probably prevented more damage from my 9yo than my hound so far. 😆

  • Haha 1
Posted

I got the one from GM Accessories.  I have 3 kids that are too young to ride up front, and they love dropping crumbs and toys everywhere.  It's worked well so far.  Reduced the mess that dropped into the bin under the seat.  Very easy to install and remove. 

 

Oh, btw, my dog rides shotgun.  The seat cover is solely for the kids. 

  • Like 1
  • Haha 2
Posted

I bought this one from 4Knines:

Dog Hammock for Truck – 4Knines®

 

Can be used as just a seat cover, can be used as a hammock. The hammock part tucks in when not in use. I leave it on everyday as just a seat cover. It has zippers in areas that allow access to the fold down center armrest. And zippers to be able to fold one section of the seat up without affecting the other side. So far I really like it.

And yes, easy ti install and remove.

I also have a 4Knines standard hammock in my wife's Equinox for hauling our Fur Babies.

 

  • Thanks 1
Posted

I've had this since 2019 with two dogs, has worked perfectly. I have the standard not the XL size. 

 

Vailge Bench Dog Car Seat Cover for Back Seat, 100% Waterproof Dog Car Seat Covers, Heavy-Duty & Nonslip Back Seat Cover for Dogs,Washable & Compatible Pet Car Seat Cover for Cars, Trucks & SUVs https://smile.amazon.com/dp/B07R1MV14F/ref=cm_sw_r_apan_glt_fabc_9WAPDY3JXKAGJ61SQYPT?_encoding=UTF8&psc=1

  • Thanks 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,759
    Total Members
    8,960
    Most Online
    DM22
    Newest Member
    DM22
    Joined
  • Who's Online   0 Members, 0 Anonymous, 1,821 Guests (See full list)

    • There are no registered users currently online
  • Latest Articles

  • Posts

    • So I'm in the middle of a DOD AFM delete on my 6.2 L86 Sierra. I had a pick holding the tensioner but after I got the Cam phaser gear off I was cleaning off all the rtv and apparently I didn't have the pick seated far enough in. I bumped it and the tensioner sprang forward.  I think everything is good but I want a second opinion. The top of the tensioner is just a looped piece of plastic that rides in that channel right? There is no spring or anything is there? I got the gear and chain back on and it seems tight and everything looks right. I'm hoping nothing fell out.
    • My 2015 1500 LTZ Silverado suddenly won't go into 4 x 4 low. It will go into 4 x 4 high.
    • Yep, just a quick reference point.    My main point being I’d do a thousand other things before I’d pay 10k for a transmission.    Speaking in ignorance cause I don’t look at these trucks, what is it worth? 20k?
    • I think users are going to want to pick their monitored parameters, which parameters they want to see first.    It should probably start with baseline at a minimum and adjust to learned, but be able to overlay baseline for comparison.   A simple severity level would be able to determine what type of alerting is appropriate or user selectable.    Why not use the OBD port though?   I think a phone connection would be a good idea, push notifications type deal.   Number 1 issue is having data is useless if you don’t know what the data should be under normal conditions. 
    • I thought I would use your thread and add to it as I just did my first longer drive with my truck in the last couple of days. I drove from the Grande Prairie area of Alberta down to Edmonton and most of where I drove in the city was the ring road so fairly free flowing but a bit of stop and go as well in the city. Stayed the night and returned home and not too many stops along the way each way but every restart and certainly every cold start sets it back for fuel mileage. Why I say that is I see some people will cherry pick a fuel mileage leg after the vehicle had been warmed up driveline wise before hand and its a forgiving ( easy rolling drive leg for example ) and call that their fuel mileage which can give a false perception of reality. I was not heavily loaded at all but never the less the flip bak cover, rubber bed mat, various tools etc and extra jerry cans of fuel all way up to a few hundred pounds of dead weight so its not an empty truck. The cold inflation tire pressures are set more near the freezing point so once they are warmed up driving I was showing 45 front and over 40 rear and realize high inflation pressures would help a little in fuel mileage but certainly not the ride on our crap sections of highway. The weather was good so was not raining as that can really drag mileage down, in fact I had a bit of a tail wind on average driving home. Most people on here would never have driven on that freeway to visualize it but its got a fair bit of rolling type of landscape with numerous river valleys. For the most part I had it on cruise set to 62 although kicking it off if I caught it in time before it started down shifting and self braking going down the grades. Most of the more substantial grades its shifting into 7th I believe as 8th just doesn't have it. Total distance round trip was 643 miles and my overall average and I did refuel three times in all, figured out to 17.65 miles per US gallon. My best fuel mileage section refuel within all of this figured out to 18.46 and these are all hand calculated figures. I find if anything that the trucks computer can be over optimistic, sometimes its pretty close but other times its stretching it. On paper persay in theory the truck would have just about made it on fumes for that whole drive without refueling once.    Which made me think of the topic thread of the wonder if these trucks could do 20 mpg and that is a good question, certainly would have to be on an easy going flat highway, no head wind, the right temperature, not packing around a bunch of dead weight and puttering along even slower than I was I would suspect and going steady and not stopping to smell the flowers or take a piss !. It probably is possible but not without effort to attain that with the wind resistance and weight of these trucks. Of course on my drive most people are passing me if they have the power as per loaded highway tractors, never mind a lot of speedy vehicles but the speed limit is 68 and most are at or well over that. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...