Jump to content

HitchMate Grab Handle By Heininger - Anybody Use One?

Anacortes Army Guy
 Share

Recommended Posts

Anacortes Army Guy Enthusiast

Anacortes Army Guy

Posted
Posted

I'm trying to make it easier getting in and out of my truck's bed, and while the Putco bed rails provide some help, I think this HitchMate Grab Handle would be better.  Plus, I like that it can double as a "retriever thingy" for items in the bed beyond my reach from the tailgate.  Anybody try one of these and can offer an opinion as to how useful it in?  Thanks ahead of time for your thoughts.  Here's their promotional video:

 

 

Anacortes Army Guy Enthusiast

Anacortes Army Guy

Posted
  • Author
Posted
9 hours ago, Mora84 said:

Check this out. And it's OEM 

 

 

I replied to the wrong thread, but unfortunately it appears this handle, which I like the functionality of, uses the same mounting holes that my bedrails use, so it's not an option for me.

Mac-427 Enthusiast

Mac-427

Posted
Posted (edited)

I have a GM accessories folding hard cover on my 2020 Silverado 1500.  Will the GM tail gate handle work with if I flip open the first section of the hard cover.

Edited by Mac-427
WeGone Enthusiast

WeGone

Posted
Posted
5 hours ago, Mac-427 said:

I have a GM accessories folding hard cover on my 2020 Silverado 1500.  Will the GM tail gate handle work with if I flip open the first section of the hard cover.

 

Mine works with the BakFlip MX4 hard folding cover.

Anacortes Army Guy Enthusiast

Anacortes Army Guy

Posted
  • Author
Posted

 

On 10/7/2021 at 9:23 AM, Mac-427 said:

I went ahead and ordered the Heinginer handle and some Plasti Dip to coat it in rubber before I use it.  Best price was at Lowes with free shipping at $66 with my veterans discount.  I'm going to Plasti Dip it with this stuff from Amazon before I let it touch my truck.  Performix 12219 Plasti Dip Clear - 22 oz. Dip Can

I too am concerned about possible abrasion issues with the truck's painted surface on the side of the tailgate opening, but I think I'm going to go with bicycling handlebar tape instead of some type of liquid coating.

Transient Senior Enthusiast

Transient

Posted
Posted

My concern is the home of the tailgate.  I use to have the GM Accessories gap filler, and it caused the plastic bushing to crack and the tailgate was sliding out every time I would open out close it.  This grab handle looks like it could put stress on the hinge and damage it.  I did end up installing the GM handle for a different reason, but very glad I did.  

Mac-427 Enthusiast

Mac-427

Posted
Posted
On 10/8/2021 at 8:21 PM, Transient said:

My concern is the home of the tailgate.  I use to have the GM Accessories gap filler, and it caused the plastic bushing to crack and the tailgate was sliding out every time I would open out close it.  This grab handle looks like it could put stress on the hinge and damage it.  I did end up installing the GM handle for a different reason, but very glad I did.  

I had exactly the same problem with the gap filler.  Ended up throwing it in the trash.

 

Mac-427 Enthusiast

Mac-427

Posted
Posted (edited)
On 10/7/2021 at 8:20 AM, Mac-427 said:

I have a GM accessories folding hard cover on my 2020 Silverado 1500.  Will the GM tail gate handle work with if I flip open the first section of the hard cover.

Finally figured out that the GM handle will work for me so I'm going to take the Heininger back to Lowes when I get it.  Just ordered the GM handle.  It will come in next week.

Edited by Mac-427
J2Jones Enthusiast

J2Jones

Posted
Posted
2 hours ago, Mac-427 said:

I had exactly the same problem with the gap filler.  Ended up throwing it in the trash.

 

 

On 10/8/2021 at 9:21 PM, Transient said:

My concern is the home of the tailgate.  I use to have the GM Accessories gap filler, and it caused the plastic bushing to crack and the tailgate was sliding out every time I would open out close it.  This grab handle looks like it could put stress on the hinge and damage it.  I did end up installing the GM handle for a different reason, but very glad I did.  

 

OK now I'm nervous because I have the gap filler too.  I'm not sure i understand what it caused to be damaged.  Can one of you add some details and/or maybe a pic so I can keep on the lookout for issues.

 

Transient Senior Enthusiast

Transient

Posted
Posted
1 hour ago, J2Jones said:

 

 

OK now I'm nervous because I have the gap filler too.  I'm not sure i understand what it caused to be damaged.  Can one of you add some details and/or maybe a pic so I can keep on the lookout for issues.

 

When the tailgate would open the gap filler would rub against the edge of the truck bed, applying pressure on the tailgate's mounting points.  The weaker side is the right side where the tailgate has a plastic bushing inside the hinge.  The design is such that if you need to remove the tailgate, the right side is where you first remove the tailgate.  The bushing would crack and the tailgate would come out of the hinge while lower or raising.  I had to push the tailgate in every time I opened or closed it. 

Steve Martin Enthusiast

Steve Martin

Posted
Posted
5 hours ago, Mac-427 said:

Finally figured out that the GM handle will work for me so I'm going to take the Heininger back to Lowes when I get it.  Just ordered the GM handle.  It will come in next week.

you ordered from dealer?  If so, how much are they charging?  Also, does the hardware come with it?  Any part number(s)?

Mac-427 Enthusiast

Mac-427

Posted
Posted (edited)
4 hours ago, Steve Martin said:

you ordered from dealer?  If so, how much are they charging?  Also, does the hardware come with it?  Any part number(s)?

I used part # gm 84532302 but it's a little confusing because the part # has changed several times.  I paid $162 for mine because I bought it through my buddy's body shop.

 

https://www.gmpartsoutlet.com/p/GMC__Sierra-1500/HANDLE/75806054/84532302.html?partner=googlebase_adwords&kwd=&origin=pla&partnerDevice=c&userLocation=9027200&gclid=EAIaIQobChMIl-DawcTD8wIVP2xvBB0gMwQrEAQYAiABEgIk9PD_BwE

Edited by Mac-427
Mac-427 Enthusiast

Mac-427

Posted
Posted

I got my GM assist handle today.  The part number is 84726114 and it is described as an "F-HANDLE." I checked fit and the holes in my truck bed line up, but two of them are unthreaded.  I'm going to hit the hardware store tomorrow but would appreciate knowing what to use on the unthreaded holes to secure the handle.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Another JR
      Gasser Subforum Has Been Quiet - - So, Regenerative Braking and Using L10

      By Another JR · Posted

      Have considered installing a DC to DC charger in your camper to replace your isolator?  
    • newdude
      Gas fill door

      By newdude · Posted

      Common failure.  You need to replace the fuel door housing.   The painted cover transfers over to the new housing.  To remove the old one there is 4 spots where you poke the plastic to release it.  
    • newdude
      Gasser Subforum Has Been Quiet - - So, Regenerative Braking and Using L10

      By newdude · Posted

      No such thing as regenerative braking on a pure ICE vehicle.     Regenerative braking is the re-capture of energy from electric motors and stores it in the battery pack.  So hybrids, PHEV and EVs have regenerative braking.     What you are seeing is the charging system changing modes is all.  Its likely entering charge mode for some sort of reason is all.  All of the charging modes will be listed below.   As for L10 vs D.  L10 turns off automatic grade braking.  L10 puts you in control of grade downshifts where in D it will automatically do it based on brake pedal position and other factors.  Otherwise L10 and D drive exactly the same aside from that one aspect.    Battery Sulfation Mode The BCM will enter this mode when the interpreted Generator output voltage is less than 13.2 V for 45 minutes. When this condition exists the BCM will enter Charge Mode for 2–3 minutes. The BCM will then determine which mode to enter depending on voltage requirements.   Charge Mode The BCM will enter Charge Mode when ever one of the following conditions are met:   Windshield wipers are ON for more than 3 s. Climate Control Voltage Boost Mode Request is true, as sensed by the HVAC control module via serial data. High speed cooling fan, rear defogger, and HVAC high speed blower operation can cause the BCM to enter the Charge Mode. The estimated battery temperature is less than 0°C (32°F). Battery State of Charge is less than 80%. Vehicle speed is greater than 145 km/h (90 mph) A current sensor malfunction exists. System voltage is determined to be below 12.56 V When any one of these conditions is met, the system will set targeted generator output voltage to a charging voltage between 13.9–15.5 V, depending on the battery state of charge and estimated battery temperature.   Fuel Economy Mode The BCM will enter Fuel Economy Mode when the estimated battery temperature is at least 0°C (32°F) but less than or equal to 80°C (176°F), the calculated battery current is less than 15 A and greater than −8 A, and the battery state-of-charge is greater than or equal to 80%. Its targeted generator output voltage is the open circuit voltage of the battery and can be between 12.5–13.1 V. When fuel economy mode is active, the generator is not charging, only maintaining open circuit battery voltage. The BCM will exit this mode and enter Charge Mode when any of the conditions described above are present.   Headlamp Mode The BCM will enter Headlamp Mode when ever the head lamps are ON (high or low beams). Voltage will be regulated between 13.9–14.5 V.   Start Up Mode When the engine is started the BCM sets a targeted generator output voltage of 14.5 V for 30 s.   Tow/Haul Mode (if applicable) Pressing the Tow/Haul Mode button located on the center stack, the vehicle system voltage is raised and the remote (non-vehicle) battery will be charged. Having the headlamps on will raise the system voltage and if the Tow/Haul button is applied it will not serve any purpose. The voltage is regulated between 13.9-14.5 V.      
    • jaszr2
      Active Grille Delete

      By jaszr2 · Posted

      Hello from Australia Just sharing that there is now a way to delete the active shutters entirely with just a plug in module. Opens up tons of room to light bars etc.
    • jake111
      Gasser Subforum Has Been Quiet - - So, Regenerative Braking and Using L10

      By jake111 · Posted

      I have an observation and a question... 1) I watch the voltage closely because I have had to dial in the cut-in/cut-out voltages of the battery separator to my camper.  The "smart" charging drives me nuts.  Anyway, I noticed that when coasting for a while, and especially if lightly using the brakes (though not necessary), the voltage goes up from mid/high-13 volts to mid/high-14 volts.  Then it drops back down after stopping or going again.  Consistently!   The only explanation I can come up with is REGENERATIVE BRAKING!  Well, maybe that's a little bit of an exaggeration, but it's certainly free extra battery charging.   2) Driving on mountain roads I will use L and vary the max gear.  Things straighten out and I end up in L10.  Sometimes I leave it there for a while.  Is there any difference between L10 and D?   

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...