Jump to content

Z71 Badging

Byrds8

By Byrds8
in Modifications, Wheels & Tires

 Share

Z71 Badging  

11 members have voted

You do not have permission to vote in this poll, or see the poll results. Please sign in or register to vote in this poll.

Recommended Posts

Byrds8 Enthusiast

Byrds8

Posted
Posted

All the emblems on my truck are currently black, except the Z71. What do you guys think I should do with them? I am debating and cant make up my mind lol.

dieselfan1 Senior Enthusiast

dieselfan1

Posted
Posted

I vote for getting black.

I still enjoy your enthusiasm Byrds.

What's next up?

Byrds8 Enthusiast

Byrds8

Posted
  • Author
Posted (edited)

As soon as I get my waiver from the state, Im tinting the windows. The sun is killing my head. After that though, I guess wheels will probably be next on my list. I found a set that I think Id like on my truck. The link is below. I had thought I was going to replace the Rancho shocks/struts like I did with the Sierra but this set doesnt ride quite as bad. So with that in mind, I think Ill wait the year and a half til the warranty is up and see about a proper lift. Why pay for it twice lol. I had thought I was going to get the Pulsar LT for it but I borrowed my neighbors before I dropped $500 on it and my mileage took a dump. Lost about 3 down to 17. Just cant see that with my commute. I have still yet to figure out the difference between the LTD and the 21s.

 

So far I have changed my antenna, intake, exhaust, added a tonneau cover, LEDs for the license plate, LED reverse lights, and tie downs.

 

https://www.tirerack.com/wheels/WheelCloseUpServlet?target=runWheelSearch&initialPartNumber=D75520909850GBRA&wheelMake=Fuel Off-Road&wheelModel=Reaction&wheelFinish=Gloss Black w%2FRed Accent&showRear=no&autoMake=Chevrolet&autoModel=Silverado+1500+4WD+Crew+Cab&autoYear=2022&autoModClar=275%2F60-20+or+275%2F50-22

 

 

As for enthusiasm, I have modded my rides for a long time. It never fades lol. Got to make them mine.

Edited by Byrds8
WeGone Enthusiast

WeGone

Posted
Posted

On the first 21 that got totaled I had painted just the 71

 

 

IMG_4389 bk.jpg

  • Like 1
Diamond817 Enthusiast

Diamond817

Posted
Posted (edited)

I removed all the badges on my 2021 Silverado RST. It looks fantastic, clean, and elegant. I also deleted the mudflaps. 

IMG_20210410_113857814_HDR.jpg

Edited by Diamond817
Jrodpic Enthusiast

Jrodpic

Posted
Posted
2 hours ago, WeGone said:

On the first 21 that got totaled I had painted just the 71

 

 

IMG_4389 bk.jpg

 

79660C86-1156-4E2B-B36F-7E0863809537.thumb.jpeg.5a018f95f750be79c17e50f4f19f5c77.jpeg


Custom emblems must be a curse. Put the black and red ones on our 2020 and it got totaled also.

  • Sad 1
Byrds8 Enthusiast

Byrds8

Posted
  • Author
Posted

Ouch, that sucks. Hopefully everyone is all ok though.

Byrds8 Enthusiast

Byrds8

Posted
  • Author
Posted

Black Z71 badges ordered. I thought about dipping them but when I read on it, it seems that most say it only lasts about 3 years. Well, I dont feel like doing it more than once. Now It can be like Fixodent, set it and forget it lol.

Jrodpic Enthusiast

Jrodpic

Posted
Posted
11 hours ago, Byrds8 said:

Ouch, that sucks. Hopefully everyone is all ok though.


Luckily no major injuries. Ended up getting a 22 Boss with 3.0 diesel. Loving it so far.

Byrds8 Enthusiast

Byrds8

Posted
  • Author
Posted

Glad no one was seriously injured. Nice on the TB.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Chuck FB
      Tire psi

      By Chuck FB · Posted

      I just can't think of the exact term GM uses for that higher gvw package without looking at the website but basically sort of a trailering package and I imagine it may also have been created to skirt around the licensing fee differences between a3/4 and 1 ton that apply in some states although ironically I believe in some states its the reverse that a 1 ton is the cheaper truck to license over a 3/4 ton. It makes no difference here in Alberta but oddly enough a 1 ton through my insurance company is a bit cheaper to insure over a 3/4 ton as its based on the insurance statistics they generate.    For sure when ever you do have the chance to weigh your truck and to be fair, try to have the fuel tank full or nearly so rather than give yourself a false sense of the truck being lighter by having an almost empty tank.    In my other comment I was mentioning stock sized tires and partly in case someone was reading this and thinking they could lower their pressure down to what your aftermarket tires are able to do with your empty truck as that is a vastly different picture in the leeway you have to play with for running minimum pressures while remaining safe. I will say also that its easy to see from reactions of truck owners that may have been more used to owning a half ton in the past or a car and be it on a forum like this or in person etc that they get so wrapped up in that placard pressure sticker that they can't get their head wrapped around the fact that an HD truck due to how much it can carry can also vary the tire pressures drastically lower than those pressures ( typically more so for the rear axle on stock sized tires ) when empty vs some car that isn't made to carry much so the tire pressures can't be lowered since it needs almost that much pressure just to carry the empty car.    If I ever do find myself in the states with this truck, I will only be too happy to switch it over to the US measuring system as then I will understand all the dash readings. The only thing that is off for me slightly with US measurements is US miles per gallon as I grew up with the Imperial gallon and to this day up here anyway speak in Imperial miles per gallon ( I don't do that on this forum though as that would confuse everyone for no good reason ). 
    • jgaudet99
      Tire psi

      By jgaudet99 · Posted

      Yes that's right, it's the upgrade that includes the overload spring and all that stuff.   Someday when I'm empty and going by a scale I'm going to stop in and get some weight readings.   Exactly  you should have the ability to change individual settings, in in Canada so I'm driving with kph but then I'm stuck with kpa when I want psi lol    
    • Chuck FB
      Tire psi

      By Chuck FB · Posted

      You must have that upgraded gvw package which is only available or at least was in 2025 with the diesel engine for the 3/4 ton and that gave the truck physically the larger 12.0 ring gear rear diff and the 3500 rear spring pack. There is a difference in what the diff housing looks like externally as one tell tale and also your truck should have the upper overload spring pack and the frame pads that the pack goes up against.    The pressure the tpms system kicks the alarm in on a stock setting truck, that is a good question and was just from what I recall but I doubt I made any notes on it as I knew for the rear that it was not at all what I was after regardless either. Being that you have a diesel and if running on stock tires the minimum pressure on an empty truck seems to be around 50 psi from hearing of those that have weighted the front axle but the rear axle is very similar in weight to a gas truck and again a near empty truck on the rear could go down to 35 pounds at minimum. However the weigh scale is the proper way to know for sure as a guide.    As to changing the readings on the dash from metric to the US measuring system, oh yes that is done easily but what I was attempting to explain was that I can't pick and choose items I want to have in US and those I still want in the metric system at the same time as its either all or none. For example lets say you drove into Canada and switched your dash over to metric so your speedometer read in km an hour, well then your reading kilopascals on your tpms readout and your wife looks over and says what the hell is that saying in the tpms screen and you say "darned if I know, I think its Chinese" !
    • Chuck FB
      Some Assembly is Required

      By Chuck FB · Posted

      This is partly why I decided to have switched over to Amsoil SS as a way of hopefully preventing the buildup of the sludge/carbon on the pistons and clogging of the oil control rings and the carbon that would cause the compression rings to stick in their grooves as well as stay cleaner up top of the heads in the valve train in the first place, an oil that has tested better by third party testing over typical shelf oil and also doing my best to run relatively short OCI. However in saying that I don't think there is any way to easily prove the oil I was using prior allowed for a buildup at the OCI I was doing, nor in the other direction to make claims the Amsoil is keeping everything clean either. There really isn't a window into the engine is there to know anything for certain even if oil samples were taken for example that showed still healthy oil being dropped out of the oil pan other than engine tear downs that extensive and expensive testing of oils does to actually visually see what is really going on inside the engine. I wish there was some easy method of seeing what is going on but I don't happen to be aware of that if there is.  
    • jgaudet99
      Tire psi

      By jgaudet99 · Posted

      My truck is a ¾ ton but my placard also says 80 for the rear tires, I think I might have the upgraded suspension to the 3500 series maybe.   I put my air down to 60 and the light was still on, and there was no way I was putting over 60 psi in the rear empty and not towing because I knew the actual number Toyo gave me and I didn't wanna ruin the center of my tires!   And you actually can change it in the settings from metric or is and it will show kph or mph then when you go into your tire settings it will be either psi or kpa, but it would be nice to just change it directly on the tire psi page 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...