Jump to content

Bed View Camera Help

lsorah0001
 Share

Recommended Posts

lsorah0001 Enthusiast

lsorah0001

Posted
Posted

So, I have a '22 CC LT and the only thing it doesn't have that I really wish it did is a bed view camera. I've searched several forums to see if it could be added, and up to this point, all efforts seem futile. Between modules and reprogramming to get the camera to show on the head unit, every lead ended up dead. We just got a new truck on the lot that has the bed view camera display in a small screen in the rear view mirror. And it is activated by a button on the camera; seemingly independent of any other module. I pulled the part numbers using that specific VIN:

 

85510310 Mirror

84601056 CHMSL with Camera

84859040 Camera Wiring

 

Does anybody have more knowledge that I do that my be able to discern if I bought these parts and put them on my truck, they would basically be plug and play. I can get pictures of the truck that has it and provide the VIN if that would help...Thoughts???

  • 2 weeks later...
rmsmis Enthusiast

rmsmis

Posted
Posted

I have a 2020 and I remember a year or more ago I did come across a post somewhere that was talking about basically this exact setup, only it was mainly for the rear-view display and didn't really mention the bed view button.  The discussion then was that this is a separate system and all that was needed to make it work was the mirror, cable, and light with the camera.  There was NO programming involved.  Because the trucks were fairly new at the time, getting those parts were nearly impossible so the idea went away, but I'm in the same spot as you and really like the idea of a bed view like you are showing.

  • 1 month later...
jawsmon Enthusiast

jawsmon

Posted
Posted

I had a 2021 2500 HD Denali that had a bed view camera, but it was accessed through the camera app and showed up on the in-dash display. I like the idea of a button on the mirror with the pic in pic display. It looks like it's much simpler to activate. 

 

KTDanforth Enthusiast

KTDanforth

Posted
Posted (edited)
On 7/12/2022 at 10:21 AM, lsorah0001 said:

Pictures of said truck...

IMG_5333.thumb.jpg.4ca514f35222baf4d3a16c636d43450c.jpg

 

IMG_5334.thumb.jpg.4fba41fca6612ff7154726da7de3527d.jpg

 

 

 

 

 

 

IMG_5336.thumb.jpg.dc79948f05e68c53aafceb50c20bed49.jpg

 

 

IMG_5335.jpg

Just curious,  when the camera is not activated,  is the mirror a standard mirror?  I installed closed to the same setup but it was a rear view camera.  The camera points over the top of the bed and not down in your bed.  It was 100% plug in play.  You just had to buy the mirror, camera/center tail light and a cable.  The mirror plugged into a power connector in your head liner.

 

Most trucks already have the power connector.   

the part list for rearview is below:

image.png.cd5f6fce2f8c11cb523cbe21443cffba.png

 

What you are doing does make sense is should be plug in play just as the above is all controlled by the mirror it self.

What chevy needs is a mirror that can switch between two camera, one for the bed and the second for rearview.

 

This will be an interesting thread to follow.

 

 

 

Edited by KTDanforth
  • 2 weeks later...
lsorah0001 Enthusiast

lsorah0001

Posted
  • Author
Posted

@KTDanforth Yes, It's just a standard mirror without the screen on... I haven't went searching for the plugs yet, but gen5diy has a rear view camera setup for sale on their site. And the truck they installed it in didn't have the plugs from the factory. I did send them an email suggesting a kit for the bed view camera. We'll see if I get a response before I look for the plugs in my truck...

  • 2 weeks later...
mandrewbot3k Enthusiast

mandrewbot3k

Posted
Posted

This is an interesting setup. All the bedview I've seen has been through the specific bedview camera and into the head unit, but this requires a video processing unit. I'm wondering if with chip shortages, they've switched to this setup.

 

It looks really similar to the way the Rear View Camera Mirror works. As far as I know, that setup is a new taillight assembly with the rear view camera (different then bed view), and that camera needs a Fakra extension cable which then plugs to the mirror itself, and the mirror gets power from a harness in the headliner. There are some good posts in the non-HD T1 forums on this. It appears it would be wired this way. 

 

I believe there are three taillight assemblies. One is Rear view, one is bed view, and one has dual cameras. 

 

This is an example of that setup and they have some videos showing the install procedure.... 2019-2022 Silverado or Sierra Factory OEM Backup Rear Camera LCD Mirro - Infotainment.com

 

 

  • 1 month later...
cwalsh Enthusiast

cwalsh

Posted
Posted

I'm interested in this too. I like the mirror controlling it with a switch. When looking into a VIN with an OEM rear camera they have a video controller where mine does not. I have a 21 SLE. I have a new High Mount 3rd brake light with camera. P/N 84699124

 

Chris

cwalsh Enthusiast

cwalsh

Posted
Posted (edited)
On 9/3/2022 at 8:23 PM, KTDanforth said:

Just curious,  when the camera is not activated,  is the mirror a standard mirror?  I installed closed to the same setup but it was a rear view camera.  The camera points over the top of the bed and not down in your bed.  It was 100% plug in play.  You just had to buy the mirror, camera/center tail light and a cable.  The mirror plugged into a power connector in your head liner.

 

Most trucks already have the power connector.   

the part list for rearview is below:

image.png.cd5f6fce2f8c11cb523cbe21443cffba.png

 

What you are doing does make sense is should be plug in play just as the above is all controlled by the mirror it self.

What chevy needs is a mirror that can switch between two camera, one for the bed and the second for rearview.

 

This will be an interesting thread to follow.

 

 

 

any write up on installing this?

Edited by cwalsh
KTDanforth Enthusiast

KTDanforth

Posted
Posted (edited)
On 11/1/2022 at 11:11 AM, cwalsh said:

any write up on installing this?

I was looking for the thread, I believe it is in the chevy 1500 mod section, but I attached the infortaintment video that has the walk thru.  The whole thing is plug in play, no programming.

 

(2) 2019-2021 Chevrolet Silverado / GMC Sierra Rear Camera LCD OEM Mirror - Easy Plug & Play Install! - Bing video 

 

Buy the parts yourself and save the money.   All are pretty cheap, except the mirror, I was able to find a take off mirror for about $300.  the rest of the parts were less than $150, so all in was $450.

 

good luck

Edited by KTDanforth
  • 4 weeks later...
cwalsh Enthusiast

cwalsh

Posted
Posted
On 11/5/2022 at 11:59 AM, KTDanforth said:

I was looking for the thread, I believe it is in the chevy 1500 mod section, but I attached the infortaintment video that has the walk thru.  The whole thing is plug in play, no programming.

 

(2) 2019-2021 Chevrolet Silverado / GMC Sierra Rear Camera LCD OEM Mirror - Easy Plug & Play Install! - Bing video 

 

Buy the parts yourself and save the money.   All are pretty cheap, except the mirror, I was able to find a take off mirror for about $300.  the rest of the parts were less than $150, so all in was $450.

 

good luck

I installed mine this weekend. I ended up taking the camera from the 84487008 and put it in a bed view third brake light lens (84699124) and installed. Turned out nice. Just need to get the trim for the wiring around the mirror.

 

Chris

  • 1 month later...
lsorah0001 Enthusiast

lsorah0001

Posted
  • Author
Posted
On 11/28/2022 at 12:12 PM, cwalsh said:

I installed mine this weekend. I ended up taking the camera from the 84487008 and put it in a bed view third brake light lens (84699124) and installed. Turned out nice. Just need to get the trim for the wiring around the mirror.

 

Chris

Did you get everything buttoned up? Do you have any pics of the final result or install?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,889
    Total Members
    8,960
    Most Online
    smandy
    Newest Member
    smandy
    Joined

  • Who's Online   4 Members, 0 Anonymous, 536 Guests (See full list)

  • Latest Articles

  • Posts

    • Coastie05
      2027 GMC Sierra: Official Discussion

      By Coastie05 · Posted

      Sure, but they do have some affordable options like the Trax, Trailblazer, Envista, and Encore. Some of these have a cheaper base price than the Civic, though the fuel economy isn’t as high. The main problem is that people WANT the highest trim with all the goodies and finance for like 7 years. That’s how ppl “afford” the more expensive vehicles. 
    • Jsdirt
      07 yukon xl 6.2 stalls at hot idle and wont restart

      By Jsdirt · Posted

      Holy s**t - not much of a parts thrower you say? You BLASTED that thing with the parts cannon!  You'd have been probably $1,000 ahead if you had just brought it to a competent shop rather than shotgunning a bunch of parts it clearly didn't need.   Just FYI - oil additives are really, REALLY good at ONE thing ... and that's emptying your wallet. They're ALL useless gimmicks.   If that has the L94 or L99, then #7 is an AFM cylinder. I'd suspect a failed lifter in that case.   If you leaned on wiring, sensors, and/or connectors while changing the oil, you'll have to check all that to be sure pins didn't get pulled out, connectors broken, etc.. Old wire loom that was barely adequate when new is certainly brittle by year 19 - make sure wires aren't chaffed and shorting out somewhere where you might have leaned. or supported yourself on it.   If your a mechanic, why didn't you just find out what you were missing and troubleshoot from there??  TIMED spark, fuel PSI / injector pulse, air, compression.  Can't make ANY money going the parts cannon route.
    • Jsdirt
      2027 GMC Sierra: Official Discussion

      By Jsdirt · Posted

      LOL! Are you joking?? That wax SUCKS! 100% gimmick made to "look" good.    After just TWO winters I had severe surface rusting in patches over 90% of the frame. Only reason it looks great in the pics is because I SATURATED the frame every single fall with used motor oil for 14 of the 16 years I owned it. Otherwise it would've been sent to the crusher 8 years earlier with the speed it was rusting prior!    I sold that POS 3 years ago. Was a gigantic headache the second it rolled off the showroom floor. Brakes pulsated on the TEST DRIVE. Door trim fell off the 1st week! Interior squeaked and rattled, and the drivetrain clunked after 2k miles. 4x4 switch failed shortly after. Front end - ball joints, struts, hub bearings - all failed between 38k-50k. Engine started burning oil at 50k. Rear and and transmission failed before 100k. Nothing but problems, and frustration with the piss-poor engineering designed to make you give up. Well, it worked! Nothing on that truck was easy to remove ... except the wheels. They haven't figured out how to screw that up yet. Give 'em time ...   I won't make that mistake again. EVER.   Such fond memories ... https://postimg.cc/K1qf23tS  https://postimg.cc/gallery/X02z64J  https://postimg.cc/gallery/mHSRXZv  https://postimg.cc/gallery/D4mMRfL
    • davester
      OBD not ready?

      By davester · Posted

      Different monitors do their test only under conditions specific to that monitor.  you MIGHT find the drive cycle conditions for the monitor that isn't ready on this site: https://lemon-manuals.la/   If it's not there, then it should be on alldata.com for your truck, but it requires a paid subscription.   And you need to know which specific monitor isn't ready.
    • RW2018GMC
      Me too……..

      By RW2018GMC · Posted

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...