Jump to content

Recommended Posts

Posted

so my truck went from silent to lifter tap to silent again , like I said on few other oil post , I have try almost every popular high quality oils over the years, I have come across this valvoline oil I did some research and looked good from the additive prospective so I decide to try it I'm my hemi ram, first impression was good I took the truck for a ride and run great and smooth, but after the first cold start I heard the lifter tap on start up for few sec, I though nothing of it until I fire it up again and then tap was there again and again and again for a month until I said F%#@ this S%@t and I dump the oil, went back to pennzoil platinum and the hemi was purring like a kitten again the tap is completely gone just like it was B4 valvoline, im not suggesting that the valvoline is a bad oil but I just wanted to share my experience with it, I do not know why my hemi was having slight lifter tap on start up using valvoline oil. I will continue to use pennzoil in my new GMC 6.2 I hope the chevy will respond as good as my hemi with that oil, I do think that pennzoil make one of the best quality oil on the market right now.

Screen Shot 2022-07-16 at 10.55.40 AM.png

Screen Shot 2022-07-16 at 10.56.13 AM.png

  • Like 2
  • Thanks 1
Posted

Redline is pretty much the ultimate silencer for Hemis. When using the factory spec Pennzoil Ultra Platinum it would get pretty ticky shortly into the OCI. Redline just stays quiet. Plus it’s pretty much the finest oil money can buy, and a true, actual synthetic.

  • Like 1
Posted
57 minutes ago, OnTheReel said:

Redline is pretty much the ultimate silencer for Hemis. When using the factory spec Pennzoil Ultra Platinum it would get pretty ticky shortly into the OCI. Redline just stays quiet. Plus it’s pretty much the finest oil money can buy, and a true, actual synthetic.

I have use redline and sure is great oil, but my experience with pennzoil is just as great for the friction of the price , no tick not a tap on start up.

  • Like 1
Posted

Why do you think some oils are cheaper? Where do you think they cut the corners? Did they use cheaper oil base stocks and additive packages? Did they cut back on quality control? How can they afford to spends millions of $$ on advertising and still make money if they claim their oil is best?

  • Like 3
Posted
3 minutes ago, elcamino said:

Why do you think some oils are cheaper? Where do you think they cut the corners? Did they use cheaper oil base stocks and additive packages? Did they cut back on quality control? How can they afford to spends millions of $$ on advertising and still make money if they claim their oil is best?
 

all I can say is the oil is working great for me. that hemi is happier than pig eating ****** running pennzoil. 

  • Like 1
Posted

Pennzoil just as great as Redline, I don't think so. 

  • Like 1
  • Thanks 1
  • Haha 1
Posted
14 hours ago, FJB said:

I have use redline and sure is great oil, but my experience with pennzoil is just as great for the friction of the price , no tick not a tap on start up.

The VOAs I had done would tend to disagree. The Redline on it’s face is a much more robust oil. Both in additive and base oil composition. Note these are comparing Pennzoil Ultra Platinum 0w40 to Redline HP 0w40. Not the regular Pennzoil Platinum. But yes, you sure do have to pay for it.PENNZOIL ULT PLAT-211019.pdfRED LINE 0W40-211019.pdf

  • Like 1
Posted
11 minutes ago, OnTheReel said:

The VOAs I had done would tend to disagree. The Redline on it’s face is a much more robust oil. Both in additive and base oil composition. Note these are comparing Pennzoil Ultra Platinum 0w40 to Redline HP 0w40. Not the regular Pennzoil Platinum. But yes, you sure do have to pay for it.PENNZOIL ULT PLAT-211019.pdfRED LINE 0W40-211019.pdf

I know redline is a great oil I have use it b4, but the truck is very happy running pennzoil, I have use this oil for many year and will continue to use it in my new AT4, any blackstone test I have see returned great results.

  • Like 1
Posted

I can't think of a single reason why 'lifter tick' would happen with one oil and not the other. Both oils are in the same viscosity range and grade. 🤔

  • Like 1
Posted
18 minutes ago, Grumpy Bear said:

I can't think of a single reason why 'lifter tick' would happen with one oil and not the other. Both oils are in the same viscosity range and grade. 🤔

In my case the Redline cST @ 100 is 14.72 vs 12.76 on the PUP. Could it be a similar (albeit small) difference between OP’s Pennzoil and Valvoline accounting for the increased noise? Or different coefficient of friction?

 

I don’t know but there are too many reports of this being the case to not think there is something going on.

  • Like 1
Posted
1 hour ago, FJB said:

to bad redline is not dexos approved .

The HP is not even API certified, let alone Dexos. Professional Series meets both though. I tend to worry more about the protection and not a license. 
 

Anyway, sorry about the Redline diversion, just wanted to make note that it was the quietest oil I’ve run and most people agree when they try it.

Posted (edited)
1 hour ago, Grumpy Bear said:

I can't think of a single reason why 'lifter tick' would happen with one oil and not the other. Both oils are in the same viscosity range and grade. 🤔

I do not know, the reason I went to try valvoline because I see a blackstone and moly was way higher than the pennzoil , but to my surprise every time I shot down my truck and let it cool down the lifters would be bleed out and they would tick until pressures again, the pennzoil never ever one did that b4 .

IMG_0077.jpg

Edited by FJB
Posted (edited)

A license is a revenue stream.

Edited by elcamino
  • Like 3

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • It wouldn’t have happened if the government hadn’t mandated outrageous fuel mileage standards. It does very little for the consumer. It adds cost. Back during Covid there was a chip shortage. They gave a rebate for your truck if it didn’t have the chip to turn on cylinder deactivation. It was 50$ because at best you may see 1/2 a mile increase per gallon. Splitting hairs each fuel mileage trick wasn’t mandated. The government doesn’t do the engineering work and say use this until it’s already in use and they like it. The fuel mileage was mandated. And those add ons the results. There’s a mandate and they are the results.
    • It was never mandated.  Ever.    Automakers were incentivized to install it by getting CAFE credits to help with their vehicle fleet fuel economy scores.  They were being handed money/CAFE credits to install it.  Which is NOT a mandate.       The current admin removed the incentives that were behind them installing it.       
    • Are you playing Slide Down endlessly but your score is still low? Are you constantly crashing into obstacles as the game speed increases? Don't worry, this article will share 5 invaluable tips to help you master the race and impress your friends. Golden Rules 1. Look one step further. The mistake of 90% of new players is only staring at their character. The secret of experts is to look towards the top of the screen (where the slide is about to appear). This gives your brain an extra 0.5 - 1 second to process the situation and determine the direction of movement before the obstacle approaches. 2. Use gentle movements; don't swipe too hard. Slide Down is very sensitive. Moving your finger too forcefully or with excessive amplitude will cause your character to be thrown off course or crash into a wall. Practise moving your finger with small, decisive, and precise movements. 3. Don't be greedy for gold in dangerous locations. Gold coins are tempting for buying skins, but life is more important. If you see a gold coin right on the edge of a cliff or next to a spike trap, ignore it. Our goal is a High Score, and your score only increases if you survive. 4. Make the most of Power-ups. During the slide, you'll encounter items like Magnets (attract gold) or Shields (temporary invincibility). Never miss them! Especially the Shield, it's your "get out of jail free card" to help you get through those deadly fast sections. 5. Stay calm when speed peaks. When your score exceeds 500 or 1000, the game speed will be very fast. At this point, don't try to think logically; let your natural reflexes work. Take deep breaths and don't panic. Apply these 5 tips to your next game, and your leaderboard will surely improve dramatically. Good luck climbing the Slide Down leaderboard!
    • If you use compressed air regularly, one problem you cannot ignore is moisture. Water in the air line can cause rust, unstable air pressure, poor tool performance, and even damage to sensitive equipment. That is why I highly recommend using a desiccant air dryer. A desiccant air dryer is designed to remove moisture from compressed air by using drying materials such as activated alumina or molecular sieve. Compared with basic water separators, it can achieve much lower dew points, making it especially useful for applications that require dry and stable air. For workshops, painting systems, pneumatic tools, CNC machines, laser cutting equipment, and industrial production lines, a desiccant air dryer can make a big difference. It helps protect equipment, improve air quality, reduce maintenance costs, and extend the service life of the whole compressed air system. Another advantage is reliability. Many desiccant air dryers are built for continuous operation and can maintain stable drying performance even in demanding environments. For users who care about long-term efficiency and equipment protection, this is a smart investment. When choosing a desiccant air dryer, I suggest paying attention to air flow capacity, working pressure, dew point performance, regeneration method, and maintenance requirements. A good model should match your compressor system and actual air consumption. Overall, if moisture is causing problems in your compressed air system, a desiccant air dryer is definitely worth considering. It is practical, efficient, and highly useful for anyone who needs clean, dry, and reliable compressed air.
    • My brand new 2007 Silverado's wax frame was rust from end to end partway through it's SECOND winter here in MA. That stuff is completely useless.    
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...