Jump to content

Trailering App won't initialize

jawsmon
 Share

Recommended Posts

jawsmon Enthusiast

jawsmon

Posted
Posted

I have a new to me 2020 GMC Sierra 1500 Denali with 23K on the odometer. I set up various profiles for the different trailers that I tow occasionally. Today I was trouble shooting the lights on my small cargo trailer and the trailering app failed to initialize. I let it rest for a short while and tried again but the problem didn't go away. The third time the display said not available, try again later. 

 

 

Any thoughts anyone?

 

 

 

jawsmon Enthusiast

jawsmon

Posted
  • Author
Posted

6th try was the charm. The trailering app just started working all of a sudden. There must be a electronics gremlin lurking in the background just waiting to mess with my truck. I hope this is just a one-time event.

cltsig Enthusiast

cltsig

Posted
Posted

Mine can be hit or miss.  I haven't towed in a few months but I recall it doesn't do a heckuva lot anyway.  

EddDe Enthusiast

EddDe

Posted
Posted

I have 2020 Silverado 1500 and my Trailering App is also intermittent. I've been to two dealerships, center display software has been reinstalled multiple times, I opened a customer service case and even had a tech service case opened that simply told tech to reset console to factory defaults. Unfortunately, nothing improved the App, it's hit or miss. I'm still under warranty and will be taking it back again soon. One tech told me it is a software anomaly that will probably never be resolved.

jawsmon Enthusiast

jawsmon

Posted
  • Author
Posted

That's discouraging news. It's like they are in so much of a rush to get this to production that it's not thoroughly tested before hand. Then once it's out the door they are on to bigger and better so it's left in the dust.

 

GMCustomerService Senior Enthusiast

GMCustomerService

Posted
Posted
On 8/23/2022 at 8:36 PM, jawsmon said:

I have a new to me 2020 GMC Sierra 1500 Denali with 23K on the odometer. I set up various profiles for the different trailers that I tow occasionally. Today I was trouble shooting the lights on my small cargo trailer and the trailering app failed to initialize. I let it rest for a short while and tried again but the problem didn't go away. The third time the display said not available, try again later. 

 

 

Any thoughts anyone?

 

 

 

This is certainly not what we like to hear, jawsmon.  Please know, customer satisfaction is extremely important to us. Our team would be more than happy to take a closer look into the concerns with your 2020 GMC Sierra 1500 Denali. To do so, please send an email to [email protected] with ATTN: jawsmon/GM Trucks in the subject line.

Please include your contact information, VIN, a brief description of your concern, and the name of your preferred dealership. We look forward to hearing from you. To learn more about GM’s privacy policy, please visit https://www.gm.com/privacy-statement.html.
 
Privacy Statement | General Motors
Your privacy is important to General Motors. This Privacy Statement addresses the personal information GM collects and how GM handles that personal information.
www.gm.com
 

jawsmon Enthusiast

jawsmon

Posted
  • Author
Posted (edited)

It continues to be very sporadic. Sometimes it works and other times it refuses to initialize. I have a towing job this evening. Hopefully it will work then. 

 

I like having the profile of the different trailers that I tow because it will remember the brake gain settings and remind me to use the tow/haul mode. The light test feature is great as well.

 

I love the way it's integrated into the blind spot camera so when I turn on the turn signal that sides blind spot camera come on automatically. It sure makes towing a lot easier.

 

I would just like it to be reliable and not be so hit and miss.

Edited by jawsmon
  • 2 weeks later...
Greyhound6.2 Enthusiast

Greyhound6.2

Posted
Posted

I have had the trailer app not start a few times, I just get a blank black screen when I go to that screen. probably works fine 95% of the time  

 

jawsmon Enthusiast

jawsmon

Posted
  • Author
Posted

I hear ya. That's exactly what mine does. The local dealership is aware of the problem but didn't volunteer a solution. 

Also, I get a message sometimes when I go to engage the cruise control that says 'adaptive cruise control not available' . This is a little frustrating especially since I use it all the time, even in town.

  • 2 weeks later...
GMCustomerService Senior Enthusiast

GMCustomerService

Posted
Posted
On 9/10/2022 at 1:08 PM, Greyhound6.2 said:

I have had the trailer app not start a few times, I just get a blank black screen when I go to that screen. probably works fine 95% of the time  

 

This is certainly not what we like to hear, Greyhound6.2.  Please know, customer satisfaction is extremely important to us. Our team would be more than happy to take a closer look into the concerns with your 2020 Sierra SLT. To do so, please send an email to [email protected] with ATTN: Greyhound6.2/GM Trucks in the subject line.

Please include your contact information, VIN, a brief description of your concern, and the name of your preferred dealership. We look forward to hearing from you. To learn more about GM’s privacy policy, please visit https://www.gm.com/privacy-statement.html.
 
Privacy Statement | General Motors
Your privacy is important to General Motors. This Privacy Statement addresses the personal information GM collects and how GM handles that personal information.
www.gm.com

  • 1 month later...
buelldude Enthusiast

buelldude

Posted
Posted

It would be nice if this problem would get fixed, I have had it for the life of my truck so far.  Hampton Chevrolet has replaced the screen, same day I came out after shutting down and still had the problem???? It works when it wants to. Updates anyone?

 

EddDe Enthusiast

EddDe

Posted
Posted

No solution either, for my 2020 Silverado. Trailering App randomly does not start (blank screen) whether connected to 7-pin travel trailer or 4-pin fishing boat. It's about a 50/50 chance it will work. Dealership asked me to bring truck and travel trailer in to check and reloaded some kind of software. But, just like you said, I started truck the next day with trailer connected and app screen was blank.

jawsmon Enthusiast

jawsmon

Posted
  • Author
Posted

My truck acted the same way for a short period of time but for the past several months it's worked flawlessly. I just finished a 2,600-mile trip pulling a cargo trailer and everything worked correctly. I hope this problem has corrected itself.

GMCustomerService Senior Enthusiast

GMCustomerService

Posted
Posted
On 11/14/2022 at 12:43 PM, buelldude said:

It would be nice if this problem would get fixed, I have had it for the life of my truck so far.  Hampton Chevrolet has replaced the screen, same day I came out after shutting down and still had the problem???? It works when it wants to. Updates anyone?

 

This is certainly not what we like to hear, buelldude.  Please know, customer satisfaction is extremely important to us. Our team would be more than happy to take a closer look into the concerns with your 2020 Silverado. To do so, please send an email to [email protected] with ATTN: buelldude/GM Trucks in the subject line.

Please include your contact information, VIN, a brief description of your concern, and the name of your preferred dealership. We look forward to hearing from you. To learn more about GM’s privacy policy, please visit https://www.gm.com/privacy-statement.html.
 
Privacy Statement | General Motors
Your privacy is important to General Motors. This Privacy Statement addresses the personal information GM collects and how GM handles that personal information.
www.gm.com
 

GMCustomerService Senior Enthusiast

GMCustomerService

Posted
Posted
On 11/14/2022 at 2:44 PM, EddDe said:

No solution either, for my 2020 Silverado. Trailering App randomly does not start (blank screen) whether connected to 7-pin travel trailer or 4-pin fishing boat. It's about a 50/50 chance it will work. Dealership asked me to bring truck and travel trailer in to check and reloaded some kind of software. But, just like you said, I started truck the next day with trailer connected and app screen was blank.

This is certainly not what we like to hear, EddDe.  Please know, customer satisfaction is extremely important to us. Our team would be more than happy to take a closer look into the concerns with your 2020 Silverado 1500. To do so, please send an email to [email protected] with ATTN: EddDe/GM Trucks in the subject line.

Please include your contact information, VIN, a brief description of your concern, and the name of your preferred dealership. We look forward to hearing from you. To learn more about GM’s privacy policy, please visit https://www.gm.com/privacy-statement.html.
 
Privacy Statement | General Motors
Your privacy is important to General Motors. This Privacy Statement addresses the personal information GM collects and how GM handles that personal information.
www.gm.com
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,987
    Total Members
    8,960
    Most Online
    RSTRICK
    Newest Member
    RSTRICK
    Joined

  • Who's Online   4 Members, 0 Anonymous, 642 Guests (See full list)

  • Latest Articles

  • Posts

    • Grumpy Bear
      Valvoline R&P Fuel System Cleaner

      By Grumpy Bear · Posted

      Guys that read Dizzy's thread know that eons ago after multiple manifold pulls to clear the CCV orifice I converted it to a PCV system with an orifice below it via the valve cover. The blow-by (sticky rings) was so bad it was impossible to keep clean and accumulated water in the oil in the winter when the moisture would freeze in the fresh air side. The PCV functioning mainly as a check valve. I carefully sized the orifice to reproduce the factory values for crankcase pressure at idle.    Well...took a slug of oil to get my attention but the ring seal improvement meant the system was over drafting sucking oil up and out the breather. (V8 guys with orifice systems are nodding their heads). So today I choked it down...allot....to replicate the "just enough to hold a piece of paper on the fresh air side at idle". May still be to much but I'm working with shims at the moment. When I get it sorted I'll make a proper plate and plug. Perhaps using carburetor jets to tune it.    So I guess this means it isn't my imagination.    Dizzy is a pig guys so don't go expecting huge moves in equipment (your equipment) that is in much better shape. A needle valve....lord that just came to me....
    • Jus Cruisin
      2027 3.0l - ordered

      By Jus Cruisin · Posted

      I had a new engine installed with under 5,000 miles. It shut off coming around a residential street corner and wouldn't restart. Dealer indicated it seized. New one has been fine since with 10,000 miles on the replaced engine. Annoying but I was given a loaner for the 5 weeks it was down. I won't go with the 6.2l gasser so it's 3.0l again. I love the economy and it tows my enclosed car trailer just fine. 
    • calgator73
      Lesson relearned on basic diagnostics...

      By calgator73 · Posted

      Coming back from towing a car to my daughter in Nashville truck started making a screaming noise from underneath.  Pulled over placed in park and sure enough whining noise from underneath.  Dropped at the dealer fearing new tranny or another front pump/cover replacement.  Service writer said it sounded like the tranny too...  Well $300, new idler and a belt all is good.  Pop the hood and give a listen. lol  Now I'm telling dealers I'm no longer interested in a new truck.
    • newdude
      OIL CONSUMPTION

      By newdude · Posted

      HD uses the 6.6 gas.   Oil consumption while heavy working is considered normal.  1 quart per 100 gallons of fuel is the normal rate above 8600lbs GVWR.  If more than that, it is considered excessive.   They will have to perform an oil consumption test using the guidelines in TSB 03-06-01-023J.     Information on Engine Oil Consumption Guidelines All engines require oil to lubricate and protect the load bearing and internal moving parts from wear including cylinder walls, pistons, and piston rings. When a piston moves down its cylinder, a thin film of oil is left on the cylinder wall. During the combustion process, part of this oil layer is consumed. As a result, varying rates of oil consumption are accepted as normal in all engines. Oil Consumption Oil usage has a direct relationship with the amount of fuel used. The harder an engine works, the more fuel and oil it will use. Therefore, oil usage as a factor of fuel usage is a more accurate indicator of acceptable oil consumption levels than vehicle mileage for vehicles at or above 8600 GVW. The accepted rate of oil consumption for gasoline engines in vehicles at or above 8600 GVW is 1 liter (1 qt) within 400 liters (100 gallons) of fuel used. This rate only applies to vehicles under warranty, maintained in accordance with the appropriate maintenance schedule, driven at legal speeds and within design intent of the vehicle. Many factors can affect an owner's concern with oil consumption. Driving habits and vehicle maintenance vary from owner to owner. Thoroughly evaluate each case before deciding whether the vehicle in question has abnormal engine oil consumption. Gasket and External Leaks Inspect the oil pans, engine covers, and the engine oil cooler for leakage. Inspect for oil leakage into the engine coolant. Improper Reading of the Oil Level Indicator (Dipstick) The vehicle must be parked on a level surface to obtain accurate oil level readings. Verify that the dipstick tube is fully seated in the block. When checking the oil level, make sure the dipstick is wiped clean before taking an oil level reading and fully depress the dipstick until the shoulder bottoms out on the dipstick tube. The dipstick should be the proper part number for the engine/vehicle that is being checked. Not Waiting Long Enough After Running Engine to Check Oil Level The vehicle should be allowed to sit for at least 15 minutes, after the engine has been shut off, before taking an oil level reading to assure the oil has had enough time to drain back into the crankcase. In order to ensure accurate results, the temperature of the oil should be close to the same temperature as the last time the oil level was checked. Improper Oil Fill After an Oil Change Following an oil change, verify that the proper amount and type of oil was put in the engine and that the oil level on the dipstick is not above the full mark or below the add marks. Refer to the Owner's Manual or Service Manual for information on recommended oil quantity, viscosity, and quality. High Speed or High RPM Driving Continuous driving at high speeds/high RPMs may increase oil consumption. Because this may not always be an everyday occurrence, it is hard to determine exactly how much the oil economy will be affected. Towing or Heavy Usage Towing a trailer or hauling additional weight will increase oil consumption. Large frontal area trailers will further increase the work required from the engine, especially at highway speeds, and thus increases the rate of oil consumption. PTO Operation Operation of a PTO will increase fuel and oil usage, as the PTO driven accessory uses engine power to operate. Crankcase Ventilation System Verify that the positive crankcase ventilation (PCV) system is operating properly. Blockages, restrictions, or damage to the PCV system can result in increased oil use. Oil Dilution from Condensation On vehicles that are usually driven short distances, less than 8 km (5 mi), especially in colder weather, condensation generated from cold engine operation may not get hot enough to evaporate out of the oil. When this occurs, the dipstick may indicate that the oil level is over-full. Subsequent driving on a trip of sufficient length to enable normal engine operating temperature for 30 minutes or more, in order to vaporize excess moisture, may give the customer the impression of excessive oil consumption. Engine Temperature If an engine is run at overheated temperatures (see Owner's Manual or Service Manual) for more than brief periods, oil will oxidize at a faster than normal rate. In addition, gaskets may distort, piston rings may stick, and excessive wear may result. Verify that all cooling system components are in proper working order. Engine Wear Piston scuffing, excessive piston-to-wall clearance, tapered or out of round cylinders, worn, damaged or improperly installed valve guides, seals and piston rings will all cause an increase in oil consumption. Measurement of Oil Consumption Engines require a period of time to BREAK IN so that moving parts are properly seated. Therefore, oil economy should not be tested until the vehicle has accumulated at least 6400 km (4000 mi). An exception would be allowed only if an engine is reported to be using more than 0.946 liter (1 qt) in 1600 km (1000 mi).   Verify that the engine has no external leaks. Repair as necessary. Verify that the engine is at normal operating temperature (see Owner's Manual or Service Manual). Park the vehicle on a level surface. Wait at least 15 minutes, after the engine is shut off, before checking the oil level to make sure that most of the oil has had time to drain back into the crankcase. Check the oil level and record the vehicle mileage, date, and exact oil level on the form included in this bulletin. Next ensure the oil level is at, but not above, the full mark on the dipstick. add oil if necessary. Also ensure the proper viscosity and quality oil are being used as recommended in the Owner Manual Ask the customer once they have consumed 100 gallons of fuel schedule an appointment and return to the dealer for inspection. If the final evaluation shows that the engine uses more than 0.946 liter (1 qt) in 379 liters (100 gallons) of fuel used, follow the published symptom diagnostics as described in the appropriate Service Manual. If the oil consumption test shows that the engine uses less than 0.946 liter (1 qt) in 379 liters (100 gallons) of fuel used, explain to the customer that their engine meets the guidelines for oil consumption.  
    • RSTRICK
      OIL CONSUMPTION

      By RSTRICK · Posted

      I have a 2024 Chevy Silverado 2500 with the 6.2 liter engine, Vin: 2GC4YME79R1273849, with 27,437 miles. Recently we took a trip from Candor, NY to Townsend, TN pulling our fifth wheel, when I got close to the Townsend, TN area The truck gave me a message of low oil. I checked the dip stick and found it was 2 quarts low. Today, August 27, 2026, I had the oil changed and the technician Found the truck was very low on oil.  Is there a Recall for this? What is my recourse for this issue? Do I call the dealer where I bought it or any chevy dealer?   Robert Strickland 292 Owego Road Candor, NY 13743 352-502-6588 [email protected]

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...