Jump to content

Recommended Posts

Posted
On 12/26/2023 at 5:45 PM, Ted Stryker said:

I went with the Rockford Fosgate Punch series. 

Also filed a small claims action against GM. 

Ok LOL

Posted
9 hours ago, Ted Stryker said:

They have to respond in 14 days from the date of service or its a default judgement. Mediation is also required in my County which by law must be done within 60 days. 

 

 

Let us know how that all works out for ya.....  😆

Posted (edited)

I work in insurance litigation, and small claims usually results in either being paid cause it costs them more to defend and send someone to appear, or they may just call and try to negotiate at like 50% to buy out some risk. 

Edited by Vincej138
Posted

Crutchfield Tech was so kind to spend time with me, on '23-'24 Denali & AT4 Bose Dash Speaker Replacements. I shared pix of my dash, as they Do Not have any documentation yet, of the re-freshed GMC Denali/AT4 dash.

I already have the "A" Pillars with Tweeters off, these have 6.8 mfd. Caps on them as a crossover.

Should have the Kicker Tweeters here tomorrow (#46CST204). There are several good choices of Tweeter brands. I chose these with a Titanium Dome vs. a Cloth Type for more brightness.

I have the Pioneer 2.75" 2 way # TS-A709, (on backorder) that another posted had installed were excellent. It is said NOT to use the crossover that comes with them. Must be already one in line, so to double up, yes with mute the signal badly. Thanks for that tip !! (BTW, that person showed that 2.75" speaker, did have a Bose on the Magnet, where the Door Speaker I took out did NOT).

The Crutchfield Tech is giving the pix I took this am., to his staff, for an updated publication. While we spoke, I found out on my Denali, that the Dash is in fact, Two sections. From the windshield bottom, full width, the dash section from there, over the speaker grills, including the heads up display and defroster vents) is one section molded plastic, to the front half of the dash cover.

I gently pulled up on the underside of the driver edge speaker grill (as the "A" Pillars are removed), and it popped right up easily. As my Pioneer's are not here yet, pressed it back in place.

Pix I sent to Crutchfield attached. Due to file size, with send the other one after this.

DENALI DRIVERS GENTLY PRY UP GRILL.jpg

Posted

And Yes.....I too had an AM radio taped under my Banana Seat Stingray bike with 5 speed stick shift. Wow I am getting old....

Posted

GM  "A" Pillar Tweeter Pic.  I measured 1-11/16" dia. in the cavity the tweeter snaps into. Do even a 1" Kenwood or others should fit.

Hate "Reverse Engineering" what should have been a Great Product Option  in the first place.

'24 Denali A Pillar Tweeter 1&11-16th in. O.D..jpg

Posted
On 12/29/2023 at 1:00 PM, Kerry Pulaski said:

GM  "A" Pillar Tweeter Pic.  I measured 1-11/16" dia. in the cavity the tweeter snaps into. Do even a 1" Kenwood or others should fit.

Hate "Reverse Engineering" what should have been a Great Product Option  in the first place.

'24 Denali A Pillar Tweeter 1&11-16th in. O.D..jpg

Do you think the 1” Kicker will fit? Do you have any pics of the Kicker you have installed?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...