Jump to content

Reverse light mod ideas (no bulb replacement)

Baker17

By Baker17
in Modifications, Wheels & Tires

 Share

Recommended Posts

Baker17 Enthusiast

Baker17

Posted
Posted

I'm looking to add more light to the back of the truck (2023 Silverado 1500 LT) for more visibility when backing up in the dark. LED bulb replacement is not an option for me, since I have aftermarket tailights. 

 

I looked into VLED LP-X but customer support told me it wont work because Silverado's trailering system will interfere with it. I asked if I could wire tap into the cargo light wires, so that the lights turn on when I toggle on cargo lights, but he wasn't sure if that would work or not.

 

Anyone have tried VLEDS or any other types of lights for reverse light? Any recommendations welcome!

  • Replies 30
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

nlindste
nlindste

I used this wiring harness from amazon to tie into my factory lighting system. I have 2 rigid flush mounted lights in the pockets on the rear bumper.  It has zero effect on the trailering system.

GETGONE
GETGONE

The Curt harness won't work on a GM because the 7 way plug is dead except for 12V+ and ground unless it detects a trailer plugged in. You need the harness that plugs in between the tail light wiring t

PureZ71
PureZ71

I used podholes bracket and mounted some Baja Design S1 lights. They also came with a harness that turns them on when your cargo lights are turned on.   https://podholes.com/products/pod-hol

Posted Images

GETGONE Enthusiast

GETGONE

Posted
Posted

You will need to wire the lights into a relay. The factory circuit will overload and shut off the lights when you add any additional lights. You can use the reverse light wire in the tail light as the trigger wire for the circuit. You can use the 12V+ from the trailer wiring circuit as the power source for the relay circuit.

nlindste Enthusiast

nlindste

Posted
Posted

I used this wiring harness from amazon to tie into my factory lighting system. I have 2 rigid flush mounted lights in the pockets on the rear bumper.  It has zero effect on the trailering system.

All I did is tied into the connector.

 

https://www.amazon.com/OPT7-Redline-Connect-Harness-Silverado/dp/B09YCD82H3

 

https://www.amazon.com/Rigid-Industries-Diffused-Resistant-Accessories/dp/B01HJ4G9QI

 

 

20231204_142102.jpg

  • Like 1
  • 1 month later...
Rich Rein Enthusiast

Rich Rein

Posted
Posted (edited)
On 12/19/2023 at 10:10 PM, nlindste said:

I used this wiring harness from amazon to tie into my factory lighting system. I have 2 rigid flush mounted lights in the pockets on the rear bumper.  It has zero effect on the trailering system.

All I did is tied into the connector.

 

https://www.amazon.com/OPT7-Redline-Connect-Harness-Silverado/dp/B09YCD82H3

 

https://www.amazon.com/Rigid-Industries-Diffused-Resistant-Accessories/dp/B01HJ4G9QI

 

 

20231204_142102.jpg

@nlindste I am looking at doing something similar,and trying to visualize this all while parts are en route - does the putco harness go between the trailering plug and the body harness as well as have to tap/connect into the taillight harness? Or just behind the bumper, and then some connecting to whatever auxiliary reverse lights you are adding?

Edited by Rich Rein
  • 2 weeks later...
GETGONE Enthusiast

GETGONE

Posted
Posted

The Curt harness won't work on a GM because the 7 way plug is dead except for 12V+ and ground unless it detects a trailer plugged in. You need the harness that plugs in between the tail light wiring to get all the brake and turn signals working.

  • Like 1
Niklasbraun Enthusiast

Niklasbraun

Posted
Posted
On 12/19/2023 at 5:29 AM, Baker17 said:

I'm looking to add more light to the back of the truck (2023 Silverado 1500 LT) for more visibility when backing up in the dark. LED bulb replacement is not an option for me, since I have aftermarket tailights. 

 

I looked into VLED LP-X but customer support told me it wont work because Silverado's trailering system will interfere with it. I asked if I could wire tap into the cargo light wires, so that the lights turn on when I toggle on cargo lights, but he wasn't sure if that would work or not.

 

Anyone have tried VLEDS or any other types of lights for reverse light? Any recommendations welcome!

Have you considered auxiliary lights? I've had success with Rigid Industries D-Series lights. You can mount them strategically, and they're pretty bright.

Also, don't overlook the possibility of integrating fiber optic lighting You could discreetly embed them into the truck bed or along the bumper. Sync them up with your reverse lights without messing with the trailering setup.

Another idea is using motion-activated LED strips. Strategically position them in the bed, and they'll illuminate when you start reversing.

Rich Rein Enthusiast

Rich Rein

Posted
Posted (edited)
On 1/29/2024 at 11:25 PM, GETGONE said:

The Putco harness is a T that plugs in between the left and right tail light harnesses and then has a flat 4 plus a white wire for reverse lights.

https://www.putco.com/product/blade-quick-connect-harness/529005/

 

Just to follow up (in case this helps anyone else) - I used the Putco harness. The reverse power comes from the driver's side, as does 3 of the four wires for the extra 4 pin connector (the green power wire is the only one to come from the passenger's side). As I was only using the harness to power auxiliary reverse lights (which I wanted automatically tied in to my truck's reverse function, no extra switch needed), I cut off the 4 pin connector on the Putco harness (which means that I no longer needed the passenger side connection at all), and used the reverse wire and ground wire coming off of the driver's side piece of the harness (capping off the other two wires and hiding the ends in the loom). Power from my auxiliary lights connected to the white wire from the harness, ground from each light to the black wire...and I am in business. No issues, works exactly as I had hoped - and looks factory in the way that it all connects in (and easily removable without lasting effect because of the Putco harness).IMG_20240209_201518.thumb.jpg.fea708da14088ccf2246c16d6b78ad67.jpg

Edited by Rich Rein
Transient Senior Enthusiast

Transient

Posted
Posted

https://accessories.chevrolet.com/product/60-inch-blade-led-tailgate-light-bar-by-putco®-associated-accessories-19418352?bac=112629&body=Crew Cab Pickup&bodyId=22&bodyNumDoors=5&bodyNumDoorsId=5&categoryId=197502&make=Chevrolet&makeId=47&model=Silverado 1500&modelId=491&year=2023

 

and this

 

https://www.bajadesigns.com/products/s1-hitch-light-kit-universal/?sku=448153

GETGONE Enthusiast

GETGONE

Posted
Posted

That's a LOT of money for something you can't even use when you have your hitch in and NEED lights to hook or unhook a trailer in the dark!

SierraStorm21 Enthusiast

SierraStorm21

Posted
Posted
2 hours ago, GETGONE said:

That's a LOT of money for something you can't even use when you have your hitch in and NEED lights to hook or unhook a trailer in the dark!

It is...it went onsale during xmas time for $50 off which is still expensive imo. However for me, it'd work as I almost never tow anything, much less have to hook up in the dark. 

 

There's also the boostauto mod that's super cheap. How well it works I don't know. Was considering that too or maybe both

https://boostautoparts.com/products/bed-cargo-and-reverse-wiring-harness-2019?year=2021&make=GMC&model=Sierra 1500

GETGONE Enthusiast

GETGONE

Posted
Posted
12 hours ago, Mstorm18 said:

It is...it went onsale during xmas time for $50 off which is still expensive imo. However for me, it'd work as I almost never tow anything, much less have to hook up in the dark. 

 

There's also the boostauto mod that's super cheap. How well it works I don't know. Was considering that too or maybe both

https://boostautoparts.com/products/bed-cargo-and-reverse-wiring-harness-2019?year=2021&make=GMC&model=Sierra 1500

Why have a truck if you don't tow?

 

I made my own "boost auto" mod for a few cents. I have it set so the reverse lights come on when I press the cargo light button so it makes it super bright along with the LED cubes I added to the bottom of the hitch. Works great for hooking up a trailer or loading stuff in the bed in the dark.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • PunchT37
      Parking Brake - Automatic Engagement Questions

      By PunchT37 · Posted

      I have a `25, 1500 that auto sets on incline. Never knew that at first. I have the electronic shifter. Just think if it didn`t do that? Unlike a mechanical shift that you can muscle out of park, how would you get this thing out? That would be a problem.   What I found out later is, I don`t have to push the button to release. Just put it in gear.   Setting parameters? Don`t know if it`s possible.
    • SoCal Angler
      Parking Brake - Automatic Engagement Questions

      By SoCal Angler · Posted

      2023 GMC 3500 HD, SLE, 6.6L Gas, 4x4, 6 Spd Options:  SLE Convenience Package; Driver Alert Package 1; Spray on Bedliner; X31 Off Road Package; TRAILERING MIRRORS, HEATED POWER -ADJUSTABLE, AUTO DIMMING, WITH TURN INDICATORS WHEELHOUSE LINERS, REAR INC. REAR AXLE - 3.73 RATIO INC. GVWR, 11,350 LBS. (5148 KG) INC. FRONT AND REAR PARK ASSIST, INC. ULTRASONIC     I have been launching my new boat and noticed some things related to the parking brake.. I usually set the parking brake (habit) when on flat ground for typical driving.    When backed down on the launch ramp to launch the boat and I place gear selector into Park, the parking brake activates automatically. My second nature is to set parking brake manually and noticed I was turing the parking brake off.  The parking brake appears to be setting itself automatically.   I looked all over my owner's manual and only found references to being on an incline and manually setting parking brake, or at times parking brake will be auto engaged, but nothing specific to my situation.    When is the parking brake automatically engaged?  Under what specific circumstances?  Can the auto set parameters be changed?     I like the auto set feature.  It would be nice if always engaged when shifted into Park and released when shifted out of Park (like my wifes 2025 RAV4).   Thanks!    
    • Grumpy Bear
      Some Assembly is Required

      By Grumpy Bear · Posted

      www.enginelabs.com/news/what-i-learned-today-bearing-clearances-vs-oil-viscosities/     www.enginelabs.com/news/oil-viscosity-can-the-numbers-be-misleading/ The Big Lie… Coming full circle to the reason Lake discusses the Porsche engines in particular. Based on the 2000 samples in the SPEEDiagnostix database, increasing the oil viscosity in these engines, even those run on the track, showed no significant difference in results.   The smoking gun was in the oil chemistry. That is where the data shows higher instances of more wear. Molybdenum was the key; the higher the amount, the less the wear. Speed postulates that higher viscosity oils have more thickeners to artificially inflate their viscosity numbers. These thickeners lose viscosity under shear, and the result is that not all oils of the same viscosity have the same shear stability.   Having enough viscosity is the most important characteristic, but according to Speed, once that required viscosity level is reached, additive chemistry matters more than additional viscosity. Speed also states, oil pressure problems on the racetrack aren’t a viscosity problem; it’s an oiling system problem. Running a thicker oil is just a band-aid for an underlying oiling system problem.
    • Grumpy Bear
      Some Assembly is Required

      By Grumpy Bear · Posted

      Can it still be Assembled II?   Viscosity on the decline by various means. Heat on the rise making that worse. Engine RPM in the tank. Smaller motors with more boost trying to emulate an electric motor. Full torque, zero rpm. Then we will triple the OCI. Argh.    But wait....there is more. LSPI has pushed a shift from Ca to Mg and as that cost more PLUS the run to lower sulfur compounds the TBN is moving in the wrong direction for the increased OCI's demanded.    That not being enough to placate a demand for a parameter they can't measure the other sulfur bearing compounds are also under attack. That would be zinc and phosphorus sulfonate compounds. To some degree those are being replaced with boron esters and others, i.e. titanium ect. All of which have shorter service lives. And there there is the "Secrete Sauce" marketing for AW adds that 'Can't be detected by UOA's" but trust me because I (the blenders) never ever lie.    Spoiler alert; ALL additives are sacrificial! Smaller amounts of the old blended with less robust versions of the new do not equal longer service lives. So what are the blenders recommending? Wait for it.......   MOVING THE GOAL POSTS! OMG      Let's declare the long standing TAN/TBN crossover irrelevant and tell people that soot is a great 'graphite' based lubricant which can aid tribo films. Wait, what? Let's declare that the standards used for oxidation and nitration were to conservative and can be expanded. Let's tell them that because GDI fuel dilution, although being a VISCOSITY KILLER and an acid generator is actually okay because we have better base oils that limit viscosity failure limits. (Said knowing this is measured in fractions of a centipoise and in bases not commonly used in shelf oils)   Lying from the heart is not just the new normal but we have a public, a very young public, that is so ignorant of the facts and so sure of their "RESEARCH" into AI driven models base in regurgitated  instead of scientific research based unvarnished, peer reviewed FACTS that the incoming guard is loosing their grip on reality and the OEM's are tickled pink while the blends bend the knee.    You have an ever limited set of tools to work with. And sooner or later those will be taken from you as the API and the EPA strangle the last remaining fluids from the system. What you have left is your wits. If you care to use them.    At some point in the very near future it will not longer be possible to do "What is best for the machine", and be replaced with "The best you have access too". You WILL be rewarded with half the life and twice the cost. That isn't that hard to predict.         
    • Chuck FB
      Software Update

      By Chuck FB · Posted

      I trust you saw the other comment where he knew what he was talking about !. Yes, these darned newer vehicles with all their so smart they are stupid technology, goes and drains the battery down. As you might see my other comment, I installed a Noco 5 battery tender under the hood and at this point still have the cord routed so I have to lift the hood and then plug it in but am typically parked in a garage or a shed so its not risking the engine hood in the wind. That way I am assured or hopefully so of not finding I have a battery drawn down and can't even start the truck and that also damages the battery to draw it down too far. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...