Jump to content

Recommended Posts

Posted

Does our 4-wheel drive system need to be exercised? If it is not used a lot?

  • Like 1
Posted

Absolutely!  These forums are legion with posts of people complaining that their truck wouldn't go into 4WD when they needed it to.  Most of them hadn't used it ever or in years.

 

I try to run mine through the paces every month or so and drive it a few miles on a dirt trail near the house a couple times a year if not already off-roading.

  • Like 1
  • Thanks 1
Posted

It is always a good idea to exercise it at least every few months to make sure the actuators don’t get stuck. It is also a good idea to actually drive it for at least a few hundred feet when you do that so seals experience motion and oil movement.  Off pavement or snow/ice is best for this, but driving wet pavement in a straight line for a  short distance will work if you don’t have other options. I have  forgotten and gone as long as six months between exercising it on my 2021 and it has always shifted promptly.  I usually just use my straight 300 foot gravel driveway.  

  • Like 2
Posted

It may or may not help with keeping things working, but even if it doesn't help, testing that it does work when you don't need it, makes it more likely it will work when you do need it, and/or you can fix the problem so it works when needed.

  • Like 1
Posted

Definitely its a habit to get into, every so often go through the motions of both high range and low range and allow it to rotate over for some distance to coat all the surfaces with oil that otherwise may not receive any otherwise and like was said to coat and work the seals etc. I too am doing it on a non busy gravel road during the summer or come winter again the snow covered gravel road simply because its not busy and can mess around putting it into four low. Of course I am using four wheel high range quite often for portions of each drive all winter which would be different then one who lives in an area where unless going off roading the four wheel drive almost never gets used. 

Posted

I do on occasion. Not super often but maybe once every 3-4mo I’ll just put it in high on a straight section of road for a few miles. 

Posted

I live in Vermont, 4WD gets used quite frequently during the year. 😀

  • Like 1
  • Haha 1
Posted
1 hour ago, rjgvt said:

I live in Vermont, 4WD gets used quite frequently during the year. 😀

 

I doubt two wheel drive pickups are a hot seller off the new vehicle lot in your area !, I highly doubt any of the dealers around here have brought in one two wheel drive pickup for many years as that four wheel drive system isn't along for the ride here or I can well imagine in Vermont during the winter. Of course some of our more poorly maintained gravel roads are so bad that during the summer if it rains a person could get stuck right in the middle of a gravel road in two wheel drive LOL. 

Posted (edited)

I have owned many GM 4wd vehicles dating back to the 1980's and driven all the big 3 brands at work (GPS Survey team).  Granted I live in upper Michigan where its winter (300+ inches of snowfall this past winter) from Nov-April (+-) but other than having it in AUTO 4wd then, I never excise it when I don't need it.  Never an 4wd issue ever.  Btw, according to a fiend who is GM tech, 99% of 4wd issues he encounters are attributed to oversize tires.

 

Now if you are one who has a 4wd just for a status symbol (many do) and really never use it then it might be a good idea to do that occasionally just to make sure you know how to use it. LOL. 

snow total 25-26.jpg

Edited by Z45
  • Like 1
Posted
14 hours ago, Pryme said:

I do on occasion. Not super often but maybe once every 3-4mo I’ll just put it in high on a straight section of road for a few miles. 

Same no dirt roads, so I put it in 4hi on a straight stretch of road, set the cruise to 45, and go.

  • 3 weeks later...
Posted
On 6/10/2026 at 9:54 PM, rjgvt said:

I live in Vermont, 4WD gets used quite frequently during the year. 😀

Cool to see another Vermonter!

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.6k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,995
    Total Members
    8,960
    Most Online
    Aries68
    Newest Member
    Aries68
    Joined
  • Who's Online   5 Members, 0 Anonymous, 485 Guests (See full list)

  • Latest Articles

  • Posts

    • Check the windshield washer reservoir bolt. They ALL are loose from the factory. 
    • If one can't be found, a good automotive upholstery shop should be able to replace/sew in a new panel where the damage is on the old cover. It might not be the cheapest option..
    • Does your dealer charge you for the tire rotation on top of the oil change price ?. I haven't had any service work done at my dealer yet other than when I brought it back soon after owning it to have the front end aligned to correct the steering wheel being off center a bit. Oh they called me at least twice hounding me to bring it in for an oil change and pushing a 300.00 package of oil change and tire rotation and whatever other quick simplistic checks they would do. Only going off of what a friend gets charged for his half ton for the basic oil change and its the same amount of oil as the L8T holds, it was about 150.00. Once one buys a set of tires from most shops these days or so I believe, they will do free tire rotations and some do free tire balancing as well as free tire repairs.    Certainly doing a tire rotation is no five minute job, and definitely not at home but because I run a set of winter tires on their own wheels, I swap them at home and its a one tire at a time deal because of the tire season swap although I jack up the rear and do it and drop it back down and then raise the front and do them and coordinate the tire rotation into that process for both sets of tires. I am using a floor jack though and if I need to raise both ends at once I use a couple sets of jack stands to have all four tires off the ground. I use either an air impact or battery impact and have electric impact as well so no shortage there of easy methods to spin the lug nuts, and then retorquing the lug nuts. None of it goes quick though but my wages are cheap though ... zero. I live an hour out of town, its easier just to do things like that myself than waste a bunch of time in town and having to make an appointment and probably a special trip and sit there at the tire shop waiting for them to get my vehicle in and get it done and not screw something up in the process. 
    • I do have the 8 speed.  Interestingly enough, after driving my truck for the past 2 days now, I have not had the clunking issue at all!  I am beginning to think it may have been suspension/leaf spring related, and somehow when the shop put my truck on the lift to do their initial inspection, it relieved some built up tension/pressure that was causing my problem.  I swear it felt I was a bull rider on a bucking bull the way the truck would almost rock back and forth slightly before the big thud/clunk when coming to a stop.  I am hoping I got lucky here and it's gone for good.
    • Bring it to discount tire. They do free rotations even if you didn’t buy your tires there. I didn’t believe it until I tried and they did. You can tip the employee if you would like 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...