Jump to content

Recommended Posts

Posted

Btw, anyone looking for a clock spring that is needed in conjunction with the heated wheel, I got a brand new, never used, still in the box, that I'll sell with the pigtail connector from ssconnectors. $100 shipped via USPS ground sound fair? Let me know or PM me. Pics of it are in my previous post. (about 5 posts or so ago.)

Posted

well i just got off the phone with my buddy who happens to work in a gm dealer. gave him the vin of a suburban i found that has the ebony heated steering wheel. he pulled up the same part number of 20998064 for the wheel. I'm ordering it strait from the dealer and we shall see what happens. i've done several searches to find that other people who have ordered it from the dealer received the correct wheel. the clock spring p/n is 25966964 which has already been decided as the correct p/n and the harness from ssconnectors is 60296271. if you want the OEM harness it's p/n 25807858 but i couldn't justify the extra 80 or so dollars when I could spend 12 dollars and achieve the same thing plus some wire loom to make it look better... and really the harness is not needed at all you can just make your own by cutting off the connector and using some spade terminals. they said the wheel is about 5 day's out so i'll report back as soon as i know. If anyone who has done this has pictures of exactly where they tied into for power and ground so i could get some ideas that would be great. if not i'll just poke around in the distro box down there to see what i can't find...

Posted

Thanks a lot for checking into this for all of us. I had a feeling that was the right part number because I saw it on several other sites. I saw a very detailed installation guide with pics either in this thread or on another site that showed exactly where they connected everything. I'll try to find that for you. Please let us know how it all works out when you get it. Also, it'd be great if you could let me know what it all cost you. Anyway, thanks again!!

Posted

i'm very impatiently waiting for the parts to come in (wheel could be up to 5 days)

 

I can't really give out my real costs due to the prices i'm getting them at and true costs and whatnot... however I can tell you the whole project start to finish will cost me well under $500 however i was expecting it to cost me 600-700 and it still would have been worth it for the option to me. I opted for the harness from ssconnectors instead of getting teh oem harness because it's a lot cheaper and nobody will ever see it or even know it's there. I ordered that yesterday as well as the other parts i'm just hoping it all shows up at the same time. If you could find that site it would be great. i'll be updating as soon as i can

Posted

ALRIGHT LADIES AND GENTS!!

 

i can say with 100 percent accuracy that p/n 20998064 is an EBONY HEATED STEERING WHEEL and has NO woodgrain to it at all. and p/n 25966964 is THE CORRECT CLOCK SPRING. just got my parts in today from GM. all i'm waiting on is the pigtail from ssconnectors and i'll be one happy camper. I ordered my parts directly from GM for the wheel and clock spring and they are correct!! As far as the guy who ordered the wheel from gmpartsdirect and got a non heated wheel in the box of the correct p/n...I couldn't tell ya... maybe just a fluke who knows. I'll get pictures when I do the installation

Posted

That is awesome news!

I was the one that (as of now) was shipped the wrong part from gmpartsdirect.com.

Do mind helping me out and posting up pics like I did.

I'd love to make them exchange this non-heated wheel for the correct part. I've got this clock spring and ssconnector sitting here with otherwise no purpose.

Also so I can verify, what range would you think I should have paid? This may help me verify I got the wrong part. When I get a chance I'll find out what I did actually pay gmpartsdirect.com for that part number.

Thanks again for following up!

Posted

i would say probably around 380 for the wheel was gm list price. i'm not sure exactly, through a series of friends the whole ordeal will cost me under 400 with all parts... and i'll try to get some pics soon but i'd try to contact them and tell them they sent you the wrong part

  • Like 1
Posted

post-115084-134499367045_thumb.jpg

Ok I stand corrected. Looks like I paid $185.40 which is probably too cheap for the heated wheel? The invoice shows the part number that showed up at my door which oddly was not the heated wheel. Wonder how I'm going to argue this.

I don't mind paying the difference if there is any but I'm hoping they will take this non heated back or exchange for the heated and more so find the right wheel to sell me.

Wonder if this part number use to be a non heated wheel?! Doesn't seem right but I just don't understand how the box unopened showing the heated wheel part number, ended up being the wrong part.

I'll update as I find out more after I contact them.

post-115084-134499367045_thumb.jpg

post-115084-134499367045_thumb.jpg

post-115084-134499367045_thumb.jpg

Posted

That's awesome you got the parts! I don't have any friends at a dealer so I was hoping to get from gmpartsdirect. But too scared to get form them because of the problems that chusteveb is having. I contacted them weeks ago and asked them to verify what that part number was and never heard from them. It seems like their customer service is bad so good luck returning that wrong part they sent you chusteveb. Let us know how you make out.

 

Posted

Well still no luck from gmpartsdirect but I did go to my local dealership and got the parts department to verify that it is a black, non-wood, heated wheel... so I ordered one, $315ish.

Probably a gamble since I still need to get the wrong wheel returned.

Posted

you just answered your own question sir....... dealerships screw us more than enough. so get your wheel take it home keep the heated one and return the non heated one to the parts department :D

Posted

Well I can confirm the part number from my parts dept. from my local dealership too. Not sure what happened to my original order from gmpartsdirect but obviously they messed up. Haven't had the chance to further pursue them on this issue and probably won't since my uncle is wanting to purchase the non heated wheel off me.

 

Here's a pic of the right wheel

 

post-115084-134557029656_thumb.jpg

post-115084-134557029656_thumb.jpg

post-115084-134557029656_thumb.jpg

post-115084-134557029656_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Congratulations Isttype, on your gmc. Really like my 2024 2500hd sle doublecab now with 85,500 miles.  I checked the oil today at 4800 miles since last oil change and barely reading on the stick.  I don't care if GM says it's Acceptable adding a quart every 2000 miles because that is 100% BS, It is not a 1966 Harley Shovelhead! Sounds like it's setting up a future failure like I had with my 1500 6.2l. Other than oil consumption problems, I really like the 6.6l gas and 10 speed is really nice.  Towed a light 4000 pound trailer last week and averaged 14 mpg.  I was pretty impressive that a 7300 pound gas truck did 14mpg towing, Later-
    • Long Term Cold Cycle Limited Testing   Back to the 1990's and XOM's million mile test. Since then there have been others and there will be more. Schaeffer's, AMSOIL to name two. Of these Schaeffer's is the stand alone which I will explain in a bit later.    http://papers.sae.org/600190/:   http://papers.sae.org/850215/:   Up to 75% of  engine wear occurs on cold starts. These two links (above) provide the technical reasons for engine wear. In a nut shell, and by a large margin, cylinder wear is what takes out most motors and even with a pre-oiling system that part of the engine is dry enough on cold starts and cold warm up to pierce Stribeck.   So when you put a motor, or a car, on a dyno for a million miles stopping only for oil changes, (yes fuel is uninterrupted) or break down maintenance, you are depriving the test of the most important part of it's wear cycle. Yes a million is then a pretty easy walk even for a mineral oil under those conditions.    How about cleanliness during the long test cycles? Same thing. Varnishes that stick rings and insulate parts are laid down by repetitive 'heat cycles'. It's the cool down the precipitates the varnishes. These long runs also hinder acidic attack caused by cold start richness and less than optimal cold start ring sealing. They hinder water formation and enhance breathing of the crankcase; the petri dish of acid formation, the first step in sludge formation, amalgamation and precipitation. These motors are also monitored and controlled for water and oil temperatures to within the "normal operating range".      https://www.swri.org/sites/default/files/sequence-iiih-test.pdf Note the test sequence in some boutique oils literature for testing, API IIIH, is not the standard used for the ILSAC G7 testing. Does that mean it is irrelevant? No, not as used. As used as a 'visual guide' it makes it's point. The G7 weighted piston deposit minimum is lower.      Back to Schaeffer's. That was a cyclical test of an engine in fleet service and not a dyno mule and if you saw the video it was not mirror clean but wear was low.    There are oils like BioSyn and other 'Renewable" source oils that taught cleanliness and have proven themselves in fleet testing. Havoline an other example.    The newest ILSAC G-7 test prioritize cleanliness, LSPI mitigation and fuel economy OVER WEAR. In comparison Porsche C30 Specification Verses ILSAC G-7 Specification below:      Some will balk that this graph isn't apples to apples and I will challenge that in that this graph represent the SPECIFICATION and not the any One Oil Performance.   It is absolutely possible to minimize wear, maximize cleanliness and mitigate LSPI etc., It just isn't cheap and currently I see none that are not walking toward profit over performance.     
    • I don't think you will need a split, separate product, etc., the OBD port should be able to deliver everything you need. Since your device would be plugged into it all the time, it wouldn't miss anything.    Hardware in this case will be the easiest part of your project - ELM 327 devices will already deliver all the data you need. Reporting/software is where your advantage/marketability is.
    • I do too. I’ll never be stuck again 😂
    • It has happened to me a few times. I carry a jumpstart-tire inflator with me.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...