Popping noise when turning and reverse

[durandetto]

On another note for others coming to this thread for help with clunking noises. Generally if you get one clunk when going forward and one when going in reverse it's usually a loose upper c/a bolt.

 

Sent from my LGLS990 using Tapatalk

[Jeff0889]

2018 Suburban with less than 20 K miles, has the same problem, making the "Pang" sound  once or twice during backing and reversing. I took it to the dealer's shop, and they can not figure it out.  I have a few month to run out of warranty, I am not sure what to do with it. Any suugesitons?

[David Towne]

So I have an 05 Tahoe and when I'm reversing to park ,wheels turned hard right there is a bad clicking sound . Changes tie rods and lowr ball joint and still clicking . Any help will be highly appreciated. 2wd

Edited May 25, 2020 by David Towne

[GMGH]

I’ve been experiencing a “clicking” in my steering at tight turns when parking. This began shortly after a 2.5” level instal on 2016 Sierra. I’ve had suspension looked at twice, along with the alignment after instal. No concluded damaged parts. 

 

My research is indicating it to be a cv joint issue, but boot isn’t leaking, or possibly electronic power steering issue.  If I gather more definitive info I’ll post it. 

[JP44]

I have the same thing going on but just on the right side. I did just replace the lower control arms on both sides. It’s a 2wd.