Jump to content

Recommended Posts

Posted

Drum brakes are a a PITA!!!! Got the back brakes done! Glad he knew what he was doing!

 

We had to cut a hole in the rim to get a big ass pry bar in there to get it off. We spent a solid two hours struggling with getting one tire off then the drum took 30 minutes of pounding to get off.

 

Got a new Edelbrock carb on it as well thanks to my buddy, he gave it to me for free as well as some LT headers. Truck is one step closer to running ! Just got get front done and get three tires, and some fine tuning!

Posted (edited)

I thought this thread was about what we did to our trucks, not where we parked or ate?

My thread my rules Edited by SarahsGMC
  • Like 2
Posted (edited)

Took my 02 out for most of the day yesterday. Ran her down the highway and I don't remember having all those vibrations coming from it. Around 85 the truck felt like it was gonna come apart. Something must be out of balance, I hope lol

Edited by rdnckhntr94
Posted

Took my 02 out for most of the day yesterday. Ran her down the highway and I don't remember having all those vibrations coming from it. Around 85 the truck felt like it was gonna come apart. Something must be out of balance, I hope lol

That comes from riding in that fancy new truck.

Posted

That comes from riding in that fancy new truck.

Oh no, it definitely shouldn't be there lol but it is definitely a lot nicer to drive than my 02 that's for sure haha
Posted

No ice. It was almost 60 yesterday lol. I think it has something to do with the steep gearing, tire size, and the front driveshaft. Think it is spinning too quickly because of the gears and tires are worn down to like 33's from 35's haha

Posted

Dad asked me to drive his 09 because he felt like trans was slipping. Drove it to go do some errands to see what he was talking about. Clearly transmissions have a thing for me because now his 6l80e is shot. 180k on it. Guessing that's the expected life out of the 6 speeds??

Posted

Gave it a wash after the nice salt storm (2" of snow) we had here

 

85c63d1d94fee1cca442bd0b28b46523.jpg

 

 

Ryan

Posted

Haven't had time to wash mine but I am REALLY liking that deep rumble from the Borla, I've been standing behind it and using the remote start to listen to the start up sound, really happy.

Posted

My stock exhaust with the 6.2 sounds nice. Wonder how a new exhaust would sound?

 

 

Ryan

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • It was never mandated.  Ever.    Automakers were incentivized to install it by getting CAFE credits to help with their vehicle fleet fuel economy scores.  They were being handed money/CAFE credits to install it.  Which is NOT a mandate.       The current admin removed the incentives that were behind them installing it.       
    • Are you playing Slide Down endlessly but your score is still low? Are you constantly crashing into obstacles as the game speed increases? Don't worry, this article will share 5 invaluable tips to help you master the race and impress your friends. Golden Rules 1. Look one step further. The mistake of 90% of new players is only staring at their character. The secret of experts is to look towards the top of the screen (where the slide is about to appear). This gives your brain an extra 0.5 - 1 second to process the situation and determine the direction of movement before the obstacle approaches. 2. Use gentle movements; don't swipe too hard. Slide Down is very sensitive. Moving your finger too forcefully or with excessive amplitude will cause your character to be thrown off course or crash into a wall. Practise moving your finger with small, decisive, and precise movements. 3. Don't be greedy for gold in dangerous locations. Gold coins are tempting for buying skins, but life is more important. If you see a gold coin right on the edge of a cliff or next to a spike trap, ignore it. Our goal is a High Score, and your score only increases if you survive. 4. Make the most of Power-ups. During the slide, you'll encounter items like Magnets (attract gold) or Shields (temporary invincibility). Never miss them! Especially the Shield, it's your "get out of jail free card" to help you get through those deadly fast sections. 5. Stay calm when speed peaks. When your score exceeds 500 or 1000, the game speed will be very fast. At this point, don't try to think logically; let your natural reflexes work. Take deep breaths and don't panic. Apply these 5 tips to your next game, and your leaderboard will surely improve dramatically. Good luck climbing the Slide Down leaderboard!
    • If you use compressed air regularly, one problem you cannot ignore is moisture. Water in the air line can cause rust, unstable air pressure, poor tool performance, and even damage to sensitive equipment. That is why I highly recommend using a desiccant air dryer. A desiccant air dryer is designed to remove moisture from compressed air by using drying materials such as activated alumina or molecular sieve. Compared with basic water separators, it can achieve much lower dew points, making it especially useful for applications that require dry and stable air. For workshops, painting systems, pneumatic tools, CNC machines, laser cutting equipment, and industrial production lines, a desiccant air dryer can make a big difference. It helps protect equipment, improve air quality, reduce maintenance costs, and extend the service life of the whole compressed air system. Another advantage is reliability. Many desiccant air dryers are built for continuous operation and can maintain stable drying performance even in demanding environments. For users who care about long-term efficiency and equipment protection, this is a smart investment. When choosing a desiccant air dryer, I suggest paying attention to air flow capacity, working pressure, dew point performance, regeneration method, and maintenance requirements. A good model should match your compressor system and actual air consumption. Overall, if moisture is causing problems in your compressed air system, a desiccant air dryer is definitely worth considering. It is practical, efficient, and highly useful for anyone who needs clean, dry, and reliable compressed air.
    • My brand new 2007 Silverado's wax frame was rust from end to end partway through it's SECOND winter here in MA. That stuff is completely useless.    
    • I went another direction after losing a trailer tire, thanks to not being able to access air at ANY of the 5 gas stations and garages I stopped at prior, with a Toyota Tacoma onboard, 50 miles from the Canadian border. They were either out of order, access was blocked, or the hose a few feet too short and I couldn't get any closer without risking damage to someone's property.   https://postimg.cc/gallery/X5QJ55w
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...