Jump to content

Recommended Posts

Posted

Installed the new brake rotors, and did an oil change. I picked up a new gasket and gear oil for the rear differential, but didn't get to that today.c3f0b6007415dbaf5a139093db3c7af9.jpgf61da05f49704b81987eac766cbe67c9.jpg

Posted

Installed the new brake rotors, and did an oil change. I picked up a new gasket and gear oil for the rear differential, but didn't get to that today.c3f0b6007415dbaf5a139093db3c7af9.jpgf61da05f49704b81987eac766cbe67c9.jpg

 

:thumbs:

Posted (edited)

 

WTF! Has it been changed before?

I've seen posts of guys having to get towed back from test drives because the factory forgot to fill.

 

Whoops?

Edited by SnakeEyes
Posted

Hauling with big red 2013 LGH. Much more driveable truck than LMM

20170521_144731-1_zpsmu3qos2x.jpg

Only have one wd hitch arm on, electrical box in way on other side....not the first time one of these factories have mounted something in the way.

 

Hooks on this thing are huge.

20170521_142353_zpsz1qmshti.jpg

  • Like 1
Posted (edited)

 

WTF! Has it been changed before?

don't have a clue if it has been or not. 2005 truck. Bought it in 2011 and so far drove it 60k miles. Never checked fluid before. It has 125k miles on it.

Edited by DareDog
Posted

I've seen posts of guys having to get towed back from test drives because the factory forgot to fill.

 

Whoops?

lmao yeah just a slight mistake there

Posted

 

 

Good God man, clean that thing! :lol:

I hit it with some Amsoil Brake Cleaner

  • Like 1
Posted

Went in for Transmission fluid change.

832,875 miles on truck

 

 

 

20170526_091837_zpsdmxg2wcm.jpg

20170526_092112_zpshb5k9rz0.jpg

  • Like 1
Posted

Unhooked from a trailer last night, set the adapter plug on the bumper, forgot it was there and opened the tailgate to put my hitch in the bed. Got a nice little dent now. Paintless dent guy just looked at it over lunch and said no biggie. Thank God, I was sick...

Posted

Also, let truck sit outside this week, driving dually.....was complete last time I checked. About 2 weeks ago.

20170526_123354_zpsb4pske23.jpg

 

 

Damn Red squirrels.

 

GM wanted $162 from new hood insulation. Dad had his 2013 hit also. Nowhere near as bad. The 2013 new hood insulation is $65. Just reused his old one.

 

20170526_130001_zps9vmcaobj.jpg

 

Put a good spraying of Squirrel Stop, mostly peppermint oil, on a engine bays.

Posted

Went in for Transmission fluid change.

832,875 miles on truck

 

 

 

20170526_091837_zpsdmxg2wcm.jpg

20170526_092112_zpshb5k9rz0.jpg

crazy!!! almost to a 1,000,000!!

Posted

Went in for Transmission fluid change.

832,875 miles on truck

 

 

 

...

20170526_092112_zpshb5k9rz0.jpg

 

Looks like someone forgot to tighten the pan bolts, or cooler line - left a nice puddle in the lot there ... :noway:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,782
    Total Members
    8,960
    Most Online
    ShowMeShooter1332
    Newest Member
    ShowMeShooter1332
    Joined
  • Who's Online   1 Member, 0 Anonymous, 6,585 Guests (See full list)


  • Latest Articles

  • Posts

    • I was around and remember that era very well, so I'm calling b/s on that statement. If they were that bad no police department or taxi company would've bought a single one ... but they were used in both services (and fire) for DECADES. They were bulletproof and proven. Even the early 21st century ones weren't too bad! The early models were legendary.   Mine is proof, but people like atlas are blinded by agenda and refuse to believe facts right before their very eyes.   Even decades after they were built, a new generation started driving them, posting all their builds and shenanigans on Grandmarq.net and Crownvic.net. The failures would show up then, since they all were deep past 100k-150k miles by that point, and younger drivers tend to be a little aggressive, especially with vehicles than can lay a one-tire fire for as long as you hold your foot in it. They've more than proven themselves over the decades.   The only thing that'll really take them out is road salt. The bodies and sheet metal were garbage. A victim of the cheapout FoMoCo and GM have been partaking in before then, and since.   Today it's the stuff that counts - the undercarriage that rots away first!    GMs Caprice was no slouch either. Reliable as a stone ax - the opposite of what they build now.    
    • Let me know how your vehicles do in 10 years. You don't know ******, kid. 😂    There's a reason that Panther platform was used as police, fire, and taxi service for DECADES ... long before you were born, apparently.
    • If your connector also has a big lever to get the connector on and off, you don't want to force the lever either way, as it becomes a bigger problem if you bust the lever or the mechanism it works.
    • It's just useful to disconnect the battery to prevent odd shorting out when unplugging/plugging stuff together.  I also  touch the two cable ends together (after disonnecting) to drain the small amount of stored battery energy in various modules.   I believe the main system where you need to be more concerned with, so you need to do the above and then wait some time, iss when you are working on the air bag system, to prevent inadvertent firing of the air bags.   The in-cab switches are just that, plain switches, it's generally not a problem to swap them in/out.  For my '12, I'll get an error message on the dash if I power up the truck w them unplugged, but that's it (power up= turn the ignition on).   The ITBC located above the spare tire is a computer that manages the trailer brake system.  That is probably more important to have the battery disconnected.  It does have to be programmed to the truck, either before or after it's installed, for it to work.  For my '12, I had a very hard time reinstalling the main connector to it (IDK if yours is the same or not), it turned out the silicon seal was jamming up, preventing it from going on all the way.  I finally got it fully installed by lubing the seal with a bit of dielectric grease, then it slid on and latched in place easily.
    • JR ! I just got the truck back from the Dealership today . The technician did a cold remote start on the truck this morning and it made the noise . It was determined that it was a starter issue and replaced it under warranty . Of course   it did not make the sound after a new starter was put in because the truck was not cold . We will we see what happens tomorrow morning when I start the truck cold  . Keep tuned !   Oh I found a video on YouTube of a cold start and it did the same thing your truck and mine do , I will see if I can find it and post it up
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...