Jump to content

Recommended Posts

Posted

Its the factory grille. I just removed it and took it apart and plasti dipped it all.

Looks awesome!

  • Like 1
Posted

Finally quit raining so I took out the kayak and went fishing for a bit today.

 

20150123_152437_zpsrmksmnu0.jpg

What bed rack is that? I'm looking into one for mine.

Posted

Here's my 2015 Sierra All-Terrain and list of mods:
2.5" RC Level + RC Rear Blocks
295/55r20 Toyo AT2 Xtreme Tires
BulletProof Black Offset Flaps
Undercover Flex Tonneau
3m'd Front
35% Front Tint
MAXpider 3D Floor Liners
Muffler Delete

Eventually like to get rid of the chrome on the sides and debadge. I'll probably pull off the running boards as well.

20150129_140640_zpsgckqgvgw.jpg

20150129_140620_zpsfry4vs1m.jpg

20150129_140609_zpsqazah3zf.jpg

I know this is a "Post YOUR Truck" thread, but one of the perks of working for the dealer on the side is that I get to drive some pretty cool trucks occasionally.
Here's a couple from yesterday:

15' Denali 6.2, 6" Lift, 35's on 20's.
20150129_103054_zpsrkgy61bp.jpg

20150129_103046_zpswk3huk2s.jpg

20150129_103106_zpsrcjtdd7o.jpg

14' All Terrain, 10" Lift on 37's on 22's.
20150129_092457_zpsewaq8va3.jpg

20150129_092444_zpsv99mutbs.jpg

20150129_092432_zpsfd9yp2r4.jpg




  • Like 1
Posted

Here's my 2015 Sierra All-Terrain and list of mods:

2.5" RC Level + RC Rear Blocks

295/55r20 Toyo AT2 Xtreme Tires

BulletProof Black Offset Flaps

Undercover Flex Tonneau

3m'd Front

35% Front Tint

MAXpider 3D Floor Liners

Muffler Delete

 

Eventually like to get rid of the chrome on the sides and debadge. I'll probably pull off the running boards as well.

 

20150129_140640_zpsgckqgvgw.jpg

 

20150129_140620_zpsfry4vs1m.jpg

 

20150129_140609_zpsqazah3zf.jpg

 

I know this is a "Post YOUR Truck" thread, but one of the perks of working for the dealer on the side is that I get to drive some pretty cool trucks occasionally.

Here's a couple from yesterday:

 

15' Denali 6.2, 6" Lift, 35's on 20's.

20150129_103054_zpsrkgy61bp.jpg

 

20150129_103046_zpswk3huk2s.jpg

 

20150129_103106_zpsrcjtdd7o.jpg

 

14' All Terrain, 10" Lift on 37's on 22's.

20150129_092457_zpsewaq8va3.jpg

 

20150129_092444_zpsv99mutbs.jpg

 

20150129_092432_zpsfd9yp2r4.jpg

 

 

 

 

 

How do you like your AT with the rc rear blocks? I've been going back and forth on whether to leave the stocks in or replace with the kit.
Posted (edited)

How do you like your AT with the rc rear blocks? I've been going back and forth on whether to leave the stocks in or replace with the kit.

That picture is literally 5mins after I had the rear blocks put in. Initially I just went with the 2.5" up front and left the rear stock. It was almost dead level on a measuring tape, 39.75" up front and 40" out back. Unless you were looking at it from the rear it looked "nose high" to me and I was worried it would have too much sag in the back when I hooked up to my travel trailer.

 

Factory blocks are 1.25" and the RC are 1.75" tapered to 2".

Now I'm sitting about 39.75/40.5 which will work better for towing and from the side it doesn't hardly look any different but got rid of the "Cali lean".

 

Stock Blocks:

20150120_163416_zpsvl6swths.jpg

 

20150120_163226_zpso5ucdjmg.jpg

RC Blocks:

20150129_140554_zpsuprtbbb1.jpg

20150129_140609_zpsqazah3zf.jpg

 

 

 

 

 

Edited by hutch08
  • Like 1
Posted

That picture is literally 5mins after I had the rear blocks put in. Initially I just went with the 2.5" up front and left the rear stock. It was almost dead level on a measuring tape, 39.75" up front and 40" out back. Unless you were looking at it from the rear it looked "nose high" to me and I was worried it would have too much sag in the back when I hooked up to my travel trailer.

 

Factory blocks are 1.25" and the RC are 1.75" tapered to 2".

Now I'm sitting about 39.75/40.5 which will work better for towing and from the side it doesn't hardly look any different but got rid of the "Cali lean".

 

Stock Blocks:

20150120_163416_zpsvl6swths.jpg

 

20150120_163226_zpso5ucdjmg.jpg

RC Blocks:

20150129_140554_zpsuprtbbb1.jpg

20150129_140609_zpsqazah3zf.jpg

 

 

 

 

 

Alright cool thanks for the info. I'm getting the same kit installed tomorrow and I've seen a lot of back and forth between stick blocks and rc blocks. Thanks again! [emoji106]
Posted

 

Nice looking truck, I've always liked a black GMC/chevy with dark tint like that. Too bad TX doesn't allow it for us. We can go dark as we want in back but front windows have to be like 30% or less I think.

25% in Texas for front windows and it can be any color except red, blue or amber.
Posted

Here it is. Last post messed me up.

 

I think it looks good man. If you are iffy on them I would try and paint them all black. I think they would look even better.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,764
    Total Members
    8,960
    Most Online
    Tbhats2130
    Newest Member
    Tbhats2130
    Joined
  • Who's Online   3 Members, 0 Anonymous, 701 Guests (See full list)


×
×
  • Create New...