Jump to content

Recommended Posts

Posted
On 12/19/2017 at 8:53 AM, askibum02 said:

My 2017 LTZ Z71 I just picked up

Eye Candy thats for sure ,it looks leveled was this stock or the pic  throwing it off, nice truck good luck with the toys!

Posted
On ‎12‎/‎12‎/‎2017 at 5:13 PM, Jaxnoah said:

Is your front end vinyl wrapped?

Yes, color matched perfectly. Holds up great plus the company lifetime warrantied. 

 

Posted
On 12/7/2017 at 2:24 PM, Jaxnoah said:

Wanted my truck to be as simple and clean as can be. Thinking about doing a chrome delete, but not sure yet. 

IMG_2469.JPG

Nice looking truck!  I really like those wheels.

  • Thanks 1
Posted
On 12/21/2017 at 6:47 AM, FIFIFO said:

Yes, color matched perfectly. Holds up great plus the company lifetime warrantied. 

 

How much did you pay if you don't mind me asking? 

Posted

Don’t think I’m new. Posted with old 14. New truck 275/60 20r terra tracs. Rancho quick lift with 1/2” mofo fab spacer. Probably taking off soond3cfb099f8e49193361167fb08fb205a.jpg


Sent from my iPhone using Tapatalk

Posted
On ‎12‎/‎23‎/‎2017 at 2:37 PM, smcgillis10 said:

 


Quick it snowed everyone in the ditch!!!8ead0cb34a9f14e2675b1191e8fbdbe9.jpg

Sent from my Pixel XL using Tapatalk
 

Welcome - Look's Good - How do you light your Morimoto Hid's ???  ANY Problems with them . Thanks

Posted
14 hours ago, Snhdgreen5.3 said:

New to the forums. 2014 1500 7in rc 22x12 fuel mt 35s. Have better pics but says they're too big.

 

Screenshot_20171224-204003.jpg

Welcome

  • Thanks 1
Posted
Welcome - Look's Good - How do you light your Morimoto Hid's ???  ANY Problems with them . Thanks
No sir. Have had them in for 3 years. No issues.

Sent from my Pixel XL using Tapatalk

Posted
2 hours ago, smcgillis10 said:

No sir. Have had them in for 3 years. No issues.

Sent from my Pixel XL using Tapatalk
 

Thank you for the information. What about the dusk cover , did it fit back on with those Hid's ??  or maybe you don't have one on a 2014  ??

Posted

Merry Christmas everyone! First post, so I thought I'd throw up a picture after our surprise foot of snow.

 

2014 1500 w/t 4.3 2wd

IMG_20171226_090941722~2.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,764
    Total Members
    8,960
    Most Online
    Tbhats2130
    Newest Member
    Tbhats2130
    Joined
  • Who's Online   3 Members, 0 Anonymous, 1,239 Guests (See full list)


  • Latest Articles

  • Posts

    • You could try a used 1, they used that engine in the Astro vans, Plenty of them in the boneyard. Look for a wrecked or rotted 1 so the chance that it was scrapped for that reason and not a mechanical issue will be greater
    • Google converting 98 4.3 spider injection to carburetor if all else fails. 
    • My centre console USB ports haven’t been working and the one in the glovebox is starting to act up. When I plug my phone into the cord the radio will go black and stop playing, and the CarPlay is inconsistent.   I checked the fuses and they were fine. I changed the USB port out and still nothing. Hoping for some advice on what I should be looking at.  
    • The truck is a 1995 Chevrolet S10 Blazer, 4.3 VIN "W" engine. :cracks knuckles:   On a whim - because I needed a headache - this truck was for sale so I stopped to take a look. Doesn't run. Well, it does, but barely. Long crank, choppy idle, bad misfire(s), it REEKS of fuel. I can DO this..I'm thinking. Diamond in the rough. One owner until last year. A young guy is selling it, he bought it 6 months ago. It stranded him more than once, he's got a newborn. It was in the shop 10 days ago and he "thinks" they said it needs a new fuel injection system. He can't put any more money into it, needs it gone. I was thinking of upgrading my Macbook, which is a total want, not a need. For less than the price of a new laptop I can have fun for months tinkering on this truck and enjoying it. I'm taking this truck home. The guy was beyond thrilled, his wife was there, she thanked me profusely, I could tell they were hurting. They seemed like good people in a bind.   Some parts, a wash, maybe a set of tires, and I can have a few months of fun and then turn it for beer money (or the next project).   Sure enough, there's a work order from a shop last week in the INCHES of paperwork on this truck dating back to when the first owner bought it. They put a new distributor in it, fuel injection work describes basically opening the plenum and putting it back together. He said he couldn't afford any more work so he had them button it up and that's when he put it up for sale.   I'm not well versed in 4.3. I did discover 1995 uses the 1992-1995 SCPI "Spider" injector which is riddled with issues from splitting lines, clogged or cracked poppet valves and plastic spider legs that crumble over time. Cool. I'll just order me a ne---. Oh, the auto parts store doesn't have it? Rock Auto doesn't have it. eBay? $$$$$$ for used. These are UNAVAILABLE period end of story unless you know "a guy" who's still got one in a box somewhere.   Can't upgrade to the '96-'04 injector, it's a different plenum, wiring/pinout and sensor config.   There are a few kinda "know a guy" -guy rebuild services for these injectors out there for about $350. Okay, Okay... I'd like to know if anyone has used them? Anyone got a lead on these crappy 92-95 spiders?   I also don't want to send MY spider to Narnia and back without knowing if that's truly the problem. I guess I'll need to pull apart the plenum and do some digging.   I was also thrown for a loop. This 1995 model year truck has an OBD-II connector. The interface is decidedly not OBD-II. I can read and reset trouble codes and view live data, but there's not a lot of data. Like misfire count and on what cylinder, that's not there. It's OBD-1.5.   Nothing is ever easy. Now it makes sense why this guy wanted to disappear this thing for cheap. I'm guessing the shop told him the injector is toast, the part is unobtainable and they're not going to sort sending the thing to a rando offering rebuild service on craigslist, and the kid likely can't be without a working car for 3 weeks even if they'd facilitate that.   Experience with these early SCPI's? Stories? Things to check? Sympathy? (..Nah...)   This can sit until I sort it. But I haven't had a problem with a vehicle I couldn't easily solve in a long time.    
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...