Stock wheels on lifted trucks!

lapoolboy · January 23, 2018

I have a 2017 with 6.5" Zone lift and I am running stock 20" wheels with 35x12.50 Toyo R/T. No spacers needed at all. No trimming and no rubbing. I do have 1.5" spacers in the back, but that is just to match the front trackwidth.

illMATTic · January 23, 2018

Not sure about the zone lift but I have the red one posted earlier. 7" Rough Country bracket lift on Toyo 35's. Only had to run a 1/4 spacer up front.

Shredder15 · January 23, 2018

All stock with 2.5” TG Customz level in front and add a leaf in rear. Minor issue: some banging up front on rough roads, which I think is due to UCA hitting metal stop lightly. May remove 1.5” of the level and go to 1.5” zone body lift but the rake might require the add a leaf to come off.

Spate47 · January 23, 2018

1 hour ago, Daug207 said:

If you have +27 stock 20’s put in a 1/2” spacer and you will be fine. I have a zone 4.5 with 33’s. No rubbing whatsoever. I just won a 6” BDS from Custom Offsets and they said I can run 35’s with this setup with no rubbing. Good luck. You’ll have a whole new truck once it’s lifted

Damn, nice! When are you gonna swap out lifts?? Thanks for the insight. I ran the math a few times but just wanted a sanity check.

Spate47 · January 23, 2018

32 minutes ago, lapoolboy said:

I have a 2017 with 6.5" Zone lift and I am running stock 20" wheels with 35x12.50 Toyo R/T. No spacers needed at all. No trimming and no rubbing. I do have 1.5" spacers in the back, but that is just to match the front trackwidth.

Sweet, thanks!! How is the ride quality?

illMATTic · January 23, 2018

Just now, Spate47 said:

Sweet, thanks!! How is the ride quality?

Rides as smooth as the day I picked it up. Probably even better over train tracks and stuff. MPG is down as expected.

Daug207 · January 23, 2018

1 minute ago, Spate47 said:

Damn, nice! When are you gonna swap out lifts?? Thanks for the insight. I ran the math a few times but just wanted a sanity check.

Just waiting for the shipment. I’m running 34” studded snow tires right now so I’ll probably swap it out soon. It’s a pretty sizable expense but well worth it.

Spate47 · January 23, 2018

3 minutes ago, illMATTic said:

Rides as smooth as the day I picked it up. Probably even better over train tracks and stuff. MPG is down as expected.

Did you stick with the stocks that came with the lift or upgrade to the hydro or Fox Adventure Series?

lapoolboy · January 23, 2018

31 minutes ago, Spate47 said:

Sweet, thanks!! How is the ride quality?

Ride quality is excellent. Better than stock in my opinion. I'm about to order Fox coilovers for it, ride should get even better then.

lapoolboy · January 23, 2018

OEM step boards have since been taken off and replaced with Amp Research. I need to get a new pic of it now if it will ever quit raining!

illMATTic · January 23, 2018

1 hour ago, Spate47 said:

Did you stick with the stocks that came with the lift or upgrade to the hydro or Fox Adventure Series?

Stock up front and the RC shocks in back.

fuzzybritches · January 24, 2018

I have the stock 20 in rims with a 3.5" rough country lift with new struts and UCAs. The tires are Cooper ST Maxx 275/65/R20

Edited January 24, 2018 by fuzzybritches

Leevon · January 26, 2018

fuzzybritches, looks great! Cooper ST Maxx are the bomb. I've had three sets. Went wheeling in the black hills of SD this summer on a set, they were excellent.