Jump to content

Recommended Posts

Posted

Those codes may actually be from that old service bulletin dealing with oem bulbs in the 14-15 Sierra. I had the dealer order the volsa bulbs and was to come in and get them installed and the truck flashed to send more coltsge. I actually never went in to have that completed though.


Sent from my iPhone using Tapatalk

Posted

So can I ordered the headlights and harness from you? I’ve been looking for those headlights but I can find them anywhere for some reason

Posted
On 3/20/2018 at 12:45 PM, zmnypit said:

Hard to say. I know it did on the denalis but I have yet to see any 5.3s that flicker. I've asked around as well as check with all the locals and not one has seen or noticed a flicker. Im scratching my head on the 5.3

I have the 5.3 and the 2016 LED headlight swap and had the Volsa upgrade PIT done before I had ever done the swap. Noticed my drivers side flickers every now and then now too.

  • 4 weeks later...
Posted

here is my 15.5 2500HD Denali with 16’ hid headlights and xb fogs
8ff1057c0ba6b8929042208814681590.jpgb16dea4f05aff5e55b87ecce1d4d8688.jpg24c234dbca3d709006947979e681549d.jpgeadc417e10ce380bcd4d6289a7631370.jpg
the last pic is just running lights and fog lights. i am happy with how much brighter it is now.


Sent from my iPhone using Tapatalk

Posted
3 hours ago, jackedupZ71 said:

here is my 15.5 2500HD Denali with 16’ hid headlights and xb fogs
8ff1057c0ba6b8929042208814681590.jpgb16dea4f05aff5e55b87ecce1d4d8688.jpg24c234dbca3d709006947979e681549d.jpgeadc417e10ce380bcd4d6289a7631370.jpg
the last pic is just running lights and fog lights. i am happy with how much brighter it is now.


Sent from my iPhone using Tapatalk

Looks good but just curious why not shell out for LED 16+? The hids in the 2016's are only 25W, you can throw 55W's in stock housings and have much more output.

Posted
Looks good but just curious why not shell out for LED 16+? The hids in the 2016's are only 25W, you can throw 55W's in stock housings and have much more output.

i went back and forth between the leds and hids for a bit. 1. I couldn’t pass these up for what I give for them, 2. unless i misread something, if i would have went with the leds, i would have lost the ability to run just parking lights if i wanted. i have actually had these since Feb, just haven’t had the chance to put them in. i thought about doing the 35w morimoto upgrade, or doing a retro with a different projector, but decided to see what it would do first before shelling out more money. To me, they are as bright as my 16 silverado was with hids and xb fogs


Sent from my iPhone using Tapatalk
Posted
On 5/7/2018 at 5:29 AM, jackedupZ71 said:


i went back and forth between the leds and hids for a bit. 1. I couldn’t pass these up for what I give for them, 2. unless i misread something, if i would have went with the leds, i would have lost the ability to run just parking lights if i wanted. i have actually had these since Feb, just haven’t had the chance to put them in. i thought about doing the 35w morimoto upgrade, or doing a retro with a different projector, but decided to see what it would do first before shelling out more money. To me, they are as bright as my 16 silverado was with hids and xb fogs


Sent from my iPhone using Tapatalk

What'd you get them for by chance? PM me if you like to keep it private. 

Posted

I give $400 for them. i had been looking for a little while and was just finding lefts or rights, not both. i just got lucky and stumbled across these


Sent from my iPhone using Tapatalk

Posted
3 hours ago, jackedupZ71 said:

I give $400 for them. i had been looking for a little while and was just finding lefts or rights, not both. i just got lucky and stumbled across these


Sent from my iPhone using Tapatalk

Wow only 400? Thats a steal, dont blame you. I havn't seen even a single headlight that low.

Posted
Wow only 400? Thats a steal, dont blame you. I havn't seen even a single headlight that low.

yeah it is! and you are right, i haven’t seen them that low for just one side either. I am happy with the outcome amd the output of them. My windshield has a layer of 35 on it, and between the headlights and xbs, it is like driving with nothing on the windshield at night.


Sent from my iPhone using Tapatalk
Posted
13 hours ago, jackedupZ71 said:


yeah it is! and you are right, i haven’t seen them that low for just one side either. I am happy with the outcome amd the output of them. My windshield has a layer of 35 on it, and between the headlights and xbs, it is like driving with nothing on the windshield at night.


Sent from my iPhone using Tapatalk

If you know of another set for 400 let a brother know :D

  • Like 2
  • 1 month later...
Posted (edited)

Reviving this thread as I've been away on vacations over the last 2 months and I sold my truck. Seems like here lately I spend the majority of my online time searching for a new (used) truck. Im currently in the market for a 15-16 2500 so Im still in the game. I did keep my headlights and taillights for the 2500 of course once I find one. I also have one drivers side headlight like new condition for anyone looking, It has no broken tabs or missing pieces. $775 shipped with a set of adapters included. 

Edited by zmnypit
Posted
1 hour ago, zmnypit said:

Reviving this thread as I've been away on vacations over the last 2 months and I sold my truck. Seems like here lately I spend the majority of my online time searching for a new (used) truck. Im currently in the market for a 15-16 2500 so Im still in the game. I did keep my headlights and taillights for the 2500 of course once I find one. I also have one drivers side headlight like new condition for anyone looking, It has no broken tabs or missing pieces. $775 shipped with a set of adapters included. 

Welcome back Vann. Finally found a set of 2016 SLT headlights. Now I just have to get the courage to take apart front end and install them. Thanks again for the adaptors.

Posted
2 hours ago, WSFD6107 said:

Welcome back Vann. Finally found a set of 2016 SLT headlights. Now I just have to get the courage to take apart front end and install them. Thanks again for the adaptors.

Thanks! Nothing to it once you get going. Hardest part is the piece under the grille. It's easy with two people, one prying the tabs underneath and the other pulling in it 

Posted
3 hours ago, zmnypit said:

Thanks! Nothing to it once you get going. Hardest part is the piece under the grille. It's easy with two people, one prying the tabs underneath and the other pulling in it 

Thanks for the tip. Looks like new headlights this weekend :D.  Good luck with the new (used) truck search.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,879
    Total Members
    8,960
    Most Online
    Bert 22
    Newest Member
    Bert 22
    Joined
  • Who's Online   2 Members, 0 Anonymous, 776 Guests (See full list)


  • Latest Articles

  • Posts

    • Do you remember that Harley Davidson was more successful (solvent) when it produced about 60% of the market demand (by design) and forced wait times of up to three years? Even when your turn came around it was, "Take what we are giving you or move to the back of the line and start over". HUGE markup's were 'normalized' and dealer killed. 40% markup and no floor plan? What's not to love? Greed will kill them yet. They have surplus production and customer base is tanking. And still they think nosebleed pricing will work.  
    • The engine was done as part of the 6.2 recall?   You'd have to see if your VIN also has the 6.2 engine special coverage on it.  Coverage number is N252494003.  If you have this, your engine is covered under this and NOT the GM replacement part engine warranty which is 3yr/100k from the date of install.  The 3yr/100k mi warranty is in effect for non warranty purchases.     This is not any different if it was replaced under warranty without a recall or special coverage.  So if you had a 5.3 and it popped at 3 years in at 50,000mi during the 5yr/60k powertrain, the replacement engine would not get the 3yr/100k, and instead gets the remainder of the 5yr/60k as coverage.     So N252494003 gives 10 years or 150,000mi of coverage, which ever comes first, starting at the vehicle in service date.  So if your in service date is 01/01/2022, N252494003 gives you special coverage of the engine until 01/01/2032 or 150,000mi, whichever comes first.  So if your start date was 01/01/2022, you'd have left 5 years and 4 months (lets round to august 1st), or 62,000mi left of coverage.   So you need to know your in service date to know how much coverage is left.  
    • Okiee dokie there bud, way to take things to the extreme.   I guess you missed the whole point and take things way to serious. I installed different EV6 style injectors that just so happen to be larger in my car running the same LQ4 engine and with a better spray pattern than the stock style injectors and I noticed no difference in the idle quality. Kinda was my round about way of saying that even if you put the same size but better style injectors in your truck, you will likely see the same thing.    I'm sure you're great to have conversations with in person if that's how you act through a keyboard. One little things sets you off and now I guess my dick is all up in your face.
    • I can't believe that could possibly be the case. It should be 36mo/100k miles from installation. Then again, it also seems like since a dealership installed it, it'd all be in the system and you wouldn't need to worry about registering, either. Shows you what I know. 😄 Hope this one outlives the warranty!
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...