Jump to content

Rear Heated Seats

jakewake23

By jakewake23
in Modifications & Accessories

 Share

Recommended Posts

TenofMe Enthusiast

TenofMe

Posted
Posted

Sorry dude, I was just trollin'.

 

The build picture was from some guy in Dubai. Said the dealer there did it for him. I don't have rear vents. People have been bitching about that since late-2013 when these trucks hit the showrooms. It's a glaring omission, but really, the ventilation in the rear of these trucks works fine. Even in Dallas in August.

 

Doesn't look too hard actually. Fabbing up the plate would be the hardest part. Plenty of room to run ducts through the console.

  • Like 1
Silvern Sentry Enthusiast

Silvern Sentry

Posted
Posted

Sorry dude, I was just trollin'.

 

The build picture was from some guy in Dubai. Said the dealer there did it for him. I don't have rear vents. People have been bitching about that since late-2013 when these trucks hit the showrooms. It's a glaring omission, but really, the ventilation in the rear of these trucks works fine. Even in Dallas in August.

 

Doesn't look too hard actually. Fabbing up the plate would be the hardest part. Plenty of room to run ducts through the console.

 

aka it is photo shopped.

StillOffshore Enthusiast

StillOffshore

Posted
Posted

I like how those rear vents don't even come close to matching. If I had the option of rear vents, but they looked like those....I'd say NO!!!

f8l vnm Senior Enthusiast

f8l vnm

Posted
Posted

Biggest cheap out by GM ever.

Even damn ford work trucks come with vents in back.

  • Like 1
last truck Enthusiast

last truck

Posted
Posted

Biggest cheap out by GM ever.

Even damn ford work trucks come with vents in back.

 

who cares about the backseat lol

  • 5 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Chuck FB
      OCI, not when but why?

      By Chuck FB · Posted

      I certainly could be wrong but I hear of pickups far newer than that 2007 cutoff which may not be going to the wrecker but are having engine work done and be that a reman engine or new engine or trying to repair the existing engine. Some of it would be design issues as per the cylinder deactivation system that GM has and one of those lifters wiping out the cam and the question of oil changes moving the needle or not on that whole mess, or in the case of Ford pickup engines that have the long timing chains and wearing them out and the roller followers and phasers and some of that certainly goes back to oil change intervals. But in those various cases the truck has all sorts of life left in it and so the unfortunate owner and may be original owner or used market owner that is pouring money into repairs so the truck is not seeing the salvage yard yet but damage is happening by infrequent oil changes. A friends son had bought a 2018 I think it is half ton GM and it had some sort of extended or used dealer warranty on it and of course the lifter issue bites and its rattling and so the dealer had to swallow the bill and was at least 7000.00 and I think they only replaced what they felt they had to replace so yeah, I can see that being a ticking time bomb in the not too distant future. Would frequent oil changes cure all these engineering "marvels", probably not but some engine designs have shown that they do much better if the oil is changed a lot more often then if the manufacturer service claims are followed. New trucks cost so much that there is an incentive to keep the existing truck on the road by repairing. 
    • davester
      Tranmission stays in Low

      By davester · Posted

      get a good code reader, and find out what problems the truck has noticed by reading codes. cheap ones can only get basic engine codes, you may want to get one that can get codes from all the computers in your truck.
    • asilverblazer
      OCI, not when but why?

      By asilverblazer · Posted

      This is sort of my point, salvage yards aren't overflowing with all these 'poorly' maintained trucks - excellent/good/servicable condition otherwise, salvaged only as a result of a bad engine from poor oil change regiment.    In my area, there are no 2007 to newer gm trucks/suvs in any salvage yards. A few are in the 'recyclers' with very obvious reasons for being there - wrecked.
    • asilverblazer
      Stabilitrak conversion to Z71

      By asilverblazer · Posted

      Stabilitrack was a stability control, traction control system, that functioned independently from the transfer case.   Z-71 has nothing to do with the transfer case or differential.   If it does have an AWD system, my memory recalls this being specific to the Denali trim, converting won't be as simple as swapping out mechanical parts like differentials and transfer cases. It will require reprogramming at a minimum. Long story short, not likely worth it.   Pulling a fuse, may disable the AWD system, it might also prevent any other transfer case functions.   However, the AWD case was generally based on the same transfer case you refer to in the 2006 Suburban. If it still has a 4-High and 4-Low where the transfer case locks and splits power 50-50 front to rear, what are you gaining by changing anything? A true-rear wheel drive only, what good will that serve? Not enough to go through the trouble of changing out all the parts.    Generally, all the factory systems will handle a 33" tire and re-gearing. Probably a 35" tire too, if you aren't driving like a caveman. If 35" tires are in the plan...   If you do plan on driving like a caveman or are fully committed to 35" tires, an entire re-think of the build is probably in order. Starting with square one, an IFS front end isn't going to be the best starting point for 35's and caveman driving. 
    • PunchT37
      Oil Consumption

      By PunchT37 · Posted

      1/2 qt over full ain`t gonna hurt $h!t. Most times, a whole qt won`t either. Most have windage trays now. As long as the crank isn`t slapping itself in the oil, it`s not the end of the world.   We used to overfill 1 qt at the track, at race time. Better to have it over full than having the pan sucked dry at 6500 rpm`s.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...