WT trim with Color DIC, Steering Wheel Controls, IO5 Stereo retrofit.

[VinnyC]

So I'm new to the site and working on this swap. I already have the steering wheel with controls & new cluster from (WAMS). I'm looking for clarification on two of the steps referencing  "TAP" 

 

#7 (Radio) to #5 pin (cluster).

 

#2 (air bag) plug to #20 pin (cluster)

 

Am I adding a wire?

 

t- tap connector the original wire and running additional wire? 

 

If I'm adding a wire where can I get the correct pin for the plug

 

Please forgive me for my confusion I'm struggling to wrap my head around this process   

 

Thanks in advance for all of the help

 

Vinny 

[Ja-Rod45]

On 2/7/2020 at 1:48 PM, Todd1982 said:

Just saw this ...

 

I finished all this back in April of last year...

 

I thought i posted in here the functionality of each wire .

 

The information being sent to the Dash is over the MOST Bus the alpine does support MOST Bus

 

If you recall during the install you removed that plug and never plugged it back in.

 

Let me know if you have any more questions 

Tod, so there is a way to link the maestro back to the cluster to display the radio info on the cluster?

[Hot nasty speed]

I have a W/T and have upgraded the cluster. I have the right thumb buttons working the steering wheel to cluster. How can I get the Vol up and down or the seek button to work? Could you tell me which wires to tap into if you have the IOB unit?

 

thanks

[bmb1455]

I have the 2018 Duramax Regular Bed Crew Cab WT, Only Cruise Control On My Wheel. I Bought the wheel with heat, Audio Controls, Dash Controls. Purchased the denali cluster from WAMS, the wheel clock spring. i have the IOB Radio 7" screen. currently looking at pinouts but none of the circuit numbers match up, trying to decipher if it is doable with the 7" IOB. any input that may help out? 

[316hepster]

I have the IOB 7” screen in my 2019 2500 w/t. I’m wanting to upgrade the instrument cluster and the radio to the 8”. Already have the upgraded steering wheel (no heat) installed with only cruise buttons working.I have the upgraded cluster as well. Is this possible at all?

[MikeBMW]

On 12/1/2023 at 9:30 PM, 316hepster said:

I have the IOB 7” screen in my 2019 2500 w/t. I’m wanting to upgrade the instrument cluster and the radio to the 8”. Already have the upgraded steering wheel (no heat) installed with only cruise buttons working.I have the upgraded cluster as well. Is this possible at all?

Check out https://www.whiteautoandmedia.com/

They will let you know if its doable.

Edited December 3, 2023 by MikeBMW

[Juan Lerma]

The IOB radio does not have that grey connector, do you know if is another way to connect the steering wheel volume controls in the IOB radio?