Jump to content

LEDs with turn signals

TheGeek

By TheGeek
in Modifications & Accessories

Recommended Posts

TheGeek Enthusiast

TheGeek

Posted
Posted

Does anyone know of a way to keep the LED driving lights on when using the directional?

JimCost2014 Senior Enthusiast

JimCost2014

Posted
Posted

I am just the opposite, I would like to be able to change the directional to stay yellow instead of the pale white the LED's put out.

TheGeek Enthusiast

TheGeek

Posted
  • Author
Posted

Why? Do you want to make it harder for people to see your turn signal? Let me do their job, there is a reason they shut off...

 

Tyler

I saw one the other day that they were still on, yes it was a bit harder to see, but, it does still get your attention. I don't put any trust in directional lights anyway. I ride a motorcycle and just because someone has their directional on, that doesn't mean they are turning. And if they are, you don't really know when.

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Latest Articles

  • Posts

    • garagerog
      Navigating senior years.

      By garagerog · Posted

      First time it really happened to me was when I was 69 yrs old and I was called "Old Timer" by a complete stranger. Then in rapid succession came the aforementioned "Old Man" and my favorite of all "Pops".
    • newdude
      Where is the Ambient Air Temperature Sensor on a 2021 Chevy Suburban?

      By newdude · Posted

      Yea that's pretty normal to be off a few degrees.  Usually 2-4 degrees from say a weather app or thermometer.  
    • studly
      Where is the Ambient Air Temperature Sensor on a 2021 Chevy Suburban?

      By studly · Posted

      I just replaced the ambient air temperature sensor.  Easy as pie. I simply had to remove about 10-12 clips on the plastic cover over the radiator and remove two T-10 torx screws on the hood release lever to liberate the cover (Amazingly, none of the clips broke.  All came out and went back in with zero problems). Once the cover was removed, the temp sensor is easily accessible. The sensor cable snakes through a few guides and can be pulled out for even easier access to the sensor. I was able to work the sensor out of the mounting hole.  There is a red sliding catch on the plug that must be pulled back to disconnect the cable.  The plug was quite tight.  I had to use a screwdriver to pry it out. I plugged in the new sensor ($6.45 from RockAuto), snapped it into the mounting hole and re-snaked the cable. I put the radiator cover back on and reattached the lever arm to the hood release.  All done!     I started up my Suburban.  The temperature read 82 °F. Other thermometers at my house read 80 °F.  Close enough.  It might be reading high as my vehicle was sitting in the sun.
    • StingerZ16
      Navigating senior years.

      By StingerZ16 · Posted

      Remember when you were 50 and they called you Old Man?
    • Atlas
      Wow I'm in a pickle. (Broke down truck) and a story.

      By Atlas · Posted

      That one looks decent for the price   BUT..I want something that also supports OBDI/1.5. A lot of the prosumer-grade scanners don't have legacy support in order to keep costs low. I believe the Autel does if you go higher end with them.   For fun, I reached out to a local Snap-On rep because I was interested in the 2600. $1895 MSRP, says he can do $1595. That's still a lot, but then again, that's not a horrible discount for just asking out of the blue. Could probably do better if I was a regular buying off his truck, but I'm not.   Not sure if I mentioned but I didn't realize with USED scanners from Snap On that you need to make sure a) the serial number isn't flagged as stolen. On the newer ones, SnapOn can remotely disable the device if it's flagged in their system. And, customer service can tell you if it is, if you're thinking about buying used. B) Make sure it's paid off. If the seller still owes money to the truck or if they financed through Snap On, the device can be remotely disabled until the balance is paid. It's less clear if SnapOn will tell you if a balance is still owed; I didn't make it that far with the used model I was considering. I did read that SnapOn has no way of tracking any "truck financing" deals between the SnapOn rep and buyer, only if they financed through corporate. So there's that extra caution needed.   Still waffling on whether I go with a ~$500ish Autel/TopDon or spend bigger money. The value seems to be in the prosumer brands. I'm not giving them enough credit TBH, actual production repair shops use them daily BUT I'm still allergic to certain kinds of underdog products trying to unseat American companies with solid reputations. SnapOn's scanner isn't wholly made in the US, but it is assembled here and they have US support and probably the most proven/ robust legacy support.   Something to think about. Value, or principles? There's a $1k difference.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...