stock wheels and tires rubbing UCA with leveling kit

[SierraZ714x4]

after my leveling kit was put on, at full lock i heard this bad rubbing noise. what could be causing the stock wheels and tires to be rubbing the UCA with just a leveling kit? truck is a 2016 SLT. i have a picture but trying to figure out how to upload.

[SierraZ714x4]

http://imgur.com/a/x5kWA

[bgweed]

after my leveling kit was put on, at full lock i heard this bad rubbing noise. what could be causing the stock wheels and tires to be rubbing the UCA with just a leveling kit? truck is a 2016 SLT. i have a picture but trying to figure out how to upload.

 

 

http://imgur.com/a/x5kWA

 

That's a hell of a rub. What size wheels do you have?

I have the stock 20" AT wheels and 305/50R20 tires and I rub the UCA, but not as bad as yours seem to be.

[Rawyzf]

Strange, unless you have large tires.

 

Sent from my SM-G930V using Tapatalk

[SierraZ714x4]

the tires are stock size. definitely planning (or at least was trying to) on getting bigger tires but definitely don't think that is a good idea until i figure this problem out.

[corncob]

What kind of leveling kit did you put on?

 

 

Sent from my iPhone using Tapatalk

[SierraZ714x4]

What kind of leveling kit did you put on?

 

 

Sent from my iPhone using Tapatalk

 

Rough Country. damn thing is about to get ripped off though for coil overs i just need to figure out what exactly the problem is.

[corncob]

I would post some more pics of your suspension from different angles. That's the only way anyone here may be able to help you.

 

 

Sent from my iPhone using Tapatalk

[SierraZ714x4]

I will tomorrow.

 

thanks

[AllTerrainX]

after my leveling kit was put on, at full lock i heard this bad rubbing noise. what could be causing the stock wheels and tires to be rubbing the UCA with just a leveling kit? truck is a 2016 SLT. i have a picture but trying to figure out how to upload.

What is the size of the tires? Know the offset of the wheel?

[SierraZ714x4]

What is the size of the tires? Know the offset of the wheel?

 

275/55/20 and the wheels are +27mm

[asalinasz39]

Have you taken it for alignment?

 

 

Sent from my iPhone using Tapatalk

[swirvn]

I am in the same boat but I installed fox 2.0 all around. Stock tires on stock 20 rims. My rub at full lock is not as severe but it's still there.

 

Others have mentioned wheel spacers but I am looking at aftermarket UCA's possibly camburg or cognito to fox this because I like the stock rims...

[corncob]

I am in the same boat but I installed fox 2.0 all around. Stock tires on stock 20 rims. My rub at full lock is not as severe but it's still there.

 

Others have mentioned wheel spacers but I am looking at aftermarket UCA's possibly camburg or cognito to fox this because I like the stock rims...

 

I don't think aftermarket UCAs are going to help you. Most specify 4.75" backspacing max.

[SierraZ714x4]

Have you taken it for alignment?

 

 

Sent from my iPhone using Tapatalk

 

they did the alignment when it was installed. I'm taking it back to the shop tomorrow to see what they can see. Also will be adding more pics of my angles this afternoon to see if anyone can help after that.