Jump to content

Trailer disconnected connected on dash

cmysstailights
 Share

Recommended Posts

cmysstailights Enthusiast

cmysstailights

Posted
Posted

Bought a trailer in nov. Drove home all the way from pa to ny, 6hrs no issues. Took the trailer out for the first time in may 4 hr trip no issues. Coming home 2.5hrs into trip trailer disconnected on dash came up then said connected. Took to dealer said nothing wrong. Went out again with trailer couple weeks later on another 3hr trip, half way their on and off repeatidly 4 times. Anyone else experience this????
 2015 silveradow high country 2500 6.0
Trailer brand new 2017 forest river vibe travel trailer 38'
Sent from my SM-G935P using Tapatalk
 
 


Debra in Cali Enthusiast

Debra in Cali

Posted
Posted

I have had my 5th wheel tell me that my trailer was not connected when we first plug it in, but after cycling the key we can usually get it to acknowledge that it is there. Sometimes we have to wiggle it and then it will "find" it.  One way to tell if it really knows that the trailer is connected is to hit your trailer brake mechanism to see if the trailer brakes respond. If they don't then you have a real problem.  That is a problem that I don't want to have going down the road towing a 5th wheel. 

 

For the record, the engine brakes on these trucks are an amazing feature. I have been on downhill runs for 20-30 miles where I only had to touch the brakes around 10 times to slow her down and that was only because I sped up through a straightaway. Whoever invented that is a genius.  It is fun when men are drooling over my truck at our campsite. 

  • Like 1
crankman Enthusiast

crankman

Posted
Posted

O yea I fought that message for a long time. Changed trailer end to Pollack brand still did it. Almost a year later I finally found what caused my message the cord on my Big Tex is heavy gauge with thick insulation and it would over time during my trip pull down just enough to trigger the same message you have and then clear as fast. I put a cord strain relief on the trailer cord and then a snap ring to attach to my bumper and its never done it again. I have another trailer which only has the 4 wire flat cable and it never trips the message using it cause it has no weight to pull down during the road trip. 

cmysstailights Enthusiast

cmysstailights

Posted
  • Author
Posted
O yea I fought that message for a long time. Changed trailer end to Pollack brand still did it. Almost a year later I finally found what caused my message the cord on my Big Tex is heavy gauge with thick insulation and it would over time during my trip pull down just enough to trigger the same message you have and then clear as fast. I put a cord strain relief on the trailer cord and then a snap ring to attach to my bumper and its never done it again. I have another trailer which only has the 4 wire flat cable and it never trips the message using it cause it has no weight to pull down during the road trip. 
Thats what i am thinking. I just closed the pins tighter on the cord. See if that works. Have to find a way to make the cord not pull on it.

Sent from my SM-G935P using Tapatalk

2017HD Enthusiast

2017HD

Posted
Posted

The TBC in the truck is quite sensitive and it checks for resistance in the trailer brake lines - if it is too high it thinks the brakes are not connected and therefore the trailer. Which is why cleaning the contacts on both the truck and trailer helps. It could also mean that the wiring harness in your trailer is bad - or the brakes are bad.

cmysstailights Enthusiast

cmysstailights

Posted
  • Author
Posted
The TBC in the truck is quite sensitive and it checks for resistance in the trailer brake lines - if it is too high it thinks the brakes are not connected and therefore the trailer. Which is why cleaning the contacts on both the truck and trailer helps. It could also mean that the wiring harness in your trailer is bad - or the brakes are bad.
Im gonna take a look. Trailer is brand new, doesnt necessarily mean cord cant be bad. When brought her home from dealership 6hrs away had no issues till i took her out for the 1st time couple months later.

Sent from my SM-G935P using Tapatalk

pogrelis97 Enthusiast

pogrelis97

Posted
Posted

spray some wd-40 in your plug to clean the contacts. I had to change one of my trailer plugs to a pollak but the rest work fine.

  • Like 1
  • 5 weeks later...
EBABlacknChrome Enthusiast

EBABlacknChrome

Posted
Posted

I know I am a bit late but have had this problem in my 16 ltz and just final solved that problem in june of this year. All the stuff mentioned just wasted my time over the last couple years casing that message on the dash!! Though it was my new trailer for the longest time but it also did it with my dump trailer to. Problem seemed to be the worse on rainy days but wasn't limted to wet days. Turned out to be my factory 7/4 way combo and some module. The final straw for me was an 1-1/2 of it dinning back an fourth down the highway from my in-laws place to home! What the OP has stated only got worse with my truck. Fortunately I have a great relationship with my local dealership and they know I pull my work trailer almost daily. Not saying you don't possibly have something simple going on, just my experience with one of the newer platform problems. Never really had any problems with my 2011 2500 hd. Good luck

Sent from my SM-G930V using Tapatalk

GTBensley Enthusiast

GTBensley

Posted
Posted

Mine is constantly showing the message when I pull my dump trailer. If I get out and wiggle the plug sometimes it goes away and sometime it takes a couple tries to fix it. If I am pulling my car trailer I never seem to have any issues and the connection seems a lot more firm. 

 

Might try switching pig tails on the trailer to see if that fixes it. 

crankman Enthusiast

crankman

Posted
Posted

Its one of those things I wish GM would have left alone. I can pull the same trailer everyday with my 2008 1500 and never had a problem, but my 2015 is more sensitive as 2017HD  posted. I know there is nothing wrong with the trailer but I still had to deal with the message popping up up on my DIC. That trailer plug has to be in there snug and not move around or it will throw the message.

  • Like 1
paauto Enthusiast

paauto

Posted
Posted

Might want to try some dielectric grease on the pins to keep corrosion off.

  • 5 weeks later...
jprlsa New Member

jprlsa

Posted
Posted (edited)

Struggled with this constantly on my previous 2016 Chevy 2500 HD.  Dealer was great at trying to solve the problem and tried everything listed above.  Was worse in rain as stated before.  Wound up taking trailer to a trailer shop and discovered my "new" trailer needed a dedicated ground.  Never had the problem again. 

Edited by jprlsa
cmysstailights Enthusiast

cmysstailights

Posted
  • Author
Posted
Struggled with this constantly on my previous 2016 Chevy 2500 HD.  Dealer was great at trying to solve the problem and tried everything listed above.  Was worse in rain as stated before.  Wound up taking trailer to a trailer shop and discovered my "new" trailer needed a dedicated ground.  Never had the problem again. 
Was winterizing the camper and noticed that the camper battery terminals were loose. Wondering if that would cause the issue.

Sent from my SM-G935P using Tapatalk

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,942
    Total Members
    8,960
    Most Online
    tblt44
    Newest Member
    tblt44
    Joined

  • Who's Online   5 Members, 0 Anonymous, 822 Guests (See full list)

  • Latest Articles

  • Posts

    • C/K Man
      Silverado 4500-5500-6500 are they still being produced? Would have sold better as GMCs as well

      By C/K Man · Posted

      There was talk over the last couple of years that the contract to build these trucks between GM and International would not be renewed.  International moved production of all their other trucks besides the companion CV model out of the Springfield plant some time ago when they opened their San Antonio plant.  That left Springfield only building the Silverado Medium Duty, International CV Series, and some Express/Savanna long wheelbase cutaways.  International also put the plant up for sale some time ago.  This all answered my earlier question as to why GM and International did nothing with these trucks since they were introduced, as they had basically become a market 'placeholder' with a finite life.    The Silverado Medium Duty/International CV trucks were interesting combination of a GM powertrain, electrical system, and K2XX Silverado cab with an International chassis that was supposedly designed for a step-van type vehicle they never produced.  They were manufactured in International's Springfield plant along with the IH MV series initially.  When first introduced, there was much talk that the Silverado Medium Duty/CV would eventually get a gasoline engine option along with other upgrades and GM and IH would work on a class 6/7 joint venture truck.  This was before VW bought Navistar out, after that happened no more was said.  Draw your own conclusions...   About the time talk started that the GM/IH joint venture was not going to be renewed, rumors started that GM would develop a new line of medium duty trucks themselves.  The story is the new trucks will be part of the next generation HD's due in 2028, and will still feature a 'straight rail' chassis design that the current medium duty has.  GM views this as a desirable feature that differentiates their truck from the competition.  A gasoline engine option is also expected.  As the current Silverado Medium Duty remains in production until September 2026 and there is still a lot of inventory available do not expect any official word for some time.   I believe GM remains committed to their successful partnership with Isuzu, and all the LCF models will still be available from Chevy Commercial dealers.  Isuzu is on the cusp of opening a new large plant in South Carolina and there is also speculation that this may result in new product for both Isuzu and Chevy Commercial dealers.                  
    • davester
      push to talk button

      By davester · Posted

      drive the truck back to the dealer and complain that the button works.
    • davester
      push to talk button

      By davester · Posted

      drive the truck back to the dealer and complain that the button works.
    • nfisherman
      Software Update

      By nfisherman · Posted

      I have a 2026 2500 HD Ultimate. My phone app says there’s a software update available. It’s something about improved battery management and something to do with the running boards. I follow the instructions for the update but the “Check for Updates” option is greyed out in my settings menu. Has anyone else seen this? How did you resolve it? The help message just says “see your dealer” if the download doesn’t work. I’m just trying to save a trip. 
    • newdude
      Exhaust Question

      By newdude · Posted

      Fuel mileage?  That's all how you use your right foot.  Exhaust will give you sound.   Stock exhaust 5.3 is 2.75" diameter piping.     If the truck is nice and worth putting some $$ into it, I'd go for a Corsa catback.  I had one on my 2019 old body 5.3 and it was just perfect.  Zero drone, just driving around and cruising on the highway you'd think it was stock, but when you opened it up it was like a Camaro with the factory dual mode.  Corsa bumps their catback to 3in diameter.  

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...