Jump to content

Recommended Posts

Posted

My local GM dealership said a new line design came out in March 2023. It is GM part # 86788215 (this is for the new line and other needed parts, gaskets, etc., it is the "kit") IF you are under 60,000 miles and under 5 years it is covered under the power train warranty. At first he said no, I said dig a little deeper and type in that part # to make sure and the service manager said "well, it is covered!"

  • 8 months later...
Posted

Think the line failed on my truck today. I was driving around 55 and all the sudden I got the warning low oil pressure turn engine off. I couldn't pull over immediately because I was on a bridge guard rails on both sides and only 2 lanes. Took me about 15-20 seconds to get to a drive way. Shut it down. Oil all over the truck and dripping from the front plastic beneath the bumper. Towed it to the dealer will update tomorrow.

Posted (edited)

this happened to me  12/20/23 the oil cooler line crimp failed, drove the truck maybe a mile or two before I got it to my mechanic, motor sounded funny , dealer said my warranty is expired , had the lines replaced $565 .

GM should have had a recall on these oil lines . so the motor sounds ok ,oil pressure good , really don't know if there is any damage but I guess time will tell

Edited by woody stevenson
Posted

The dealership called and said it was my oil cooler line that blew at the crimp and the engine is shot. Parts are on backorder....I'm still under warranty and sounds like it will be covered but I need my truck I haul things alot. Will update when I know more.

Posted

My trucks still down dealer has no loaners and chevy can't guarantee I'll be reimbursed for a rental.. This really sucks I thought Chevy was better than this.

  • Sad 1
  • 3 weeks later...
Posted

Having the same issue on my 2019 Chevy Trail Boss with 80,000. My wife was driving to a doctors appointment , low oil light came on, shortly after that the message about pulling over. She pulled over at the first safe spot. Oil was all over the side of the truck and front of engine. Engine was blown. We had it towed to Shelor Motor Mile in Christiansburg Virginia. It took a week to have it looked at and have to be told that the extended warranty covered the oil cooler hose but have to tear the engine apart to see if the engine blew do to lack of oil for the oil cooler hose blowing. After a few more days Shelor called and said that the engine blowing was due to lack of oil but the only way the warranty place would fix it is if we had the receipts to all of our oil changes. I change my own oil most of the time and have no idea how to retrieve them from my bank statements. We called the warranty place (Costgaurd). They seemed great and said “No problem” they were going to send out their own inspector. A week later we get a call saying that they engine blew do to no oil in the engine and driving with no oil , along with poor maintenance. This is a total joke. Right now still fighting with GM, Shelor and the Costgaurd, trying to find a reasonable person to put 2 and 2 together. Plus Joe ( our representative from Shelor) is a horrible. It sometimes takes days to get back with us. He called my wife today and said it will cost another $1500 to move the truck out of the bay until we if out what we want to do, with addition to the $10028 to replace the engine. This has been going on 34 days. I am trying to reach upper management from Shelor and waiting on GM to get back with us. So far it looks like we have to buy a new engine. Looks like the next truck will not be a Gm or anything from Shelor. They sold us the warranty too. Is it worth going to small claims court? I apologize for the bad grammar. I am a little angry. Any helpful suggestions will be appreciated. I usually would not call out companies or employee’s name but this is completely ridiculous .Having the same issue on my 2019 Chevy Trail Boss with 80,000. My wife was driving to a doctors appointment , low oil light came on, shortly after that the message about pulling over. She pulled over at the first safe spot. Oil was all over the side of the truck and front of engine. Engine was blown. We had it towed to Shelor Motor Mile in Christiansburg Virginia. It took a week to have it looked at and have to be told that the extended warranty covered the oil cooler hose but have to tear the engine apart to see if the engine blew do to lack of oil for the oil cooler hose blowing. After a few more days Shelor called and said that the engine blowing was due to lack of oil but the only way the warranty place would fix it is if we had the receipts to all of our oil changes. I change my own oil most of the time and have no idea how to retrieve them from my bank statements. We called the warranty place (Costgaurd). They seemed great and said “No problem” they were going to send out their own inspector. A week later we get a call saying that they engine blew do to no oil in the engine and driving with no oil , along with poor maintenance. This is a total joke. Right now still fighting with GM, Shelor and the Costgaurd, trying to find a reasonable person to put 2 and 2 together. Plus Joe ( our representative from Shelor) is a horrible. It sometimes takes days to get back with us. He called my wife today and said it will cost another $1500 to move the truck out of the bay until we if out what we want to do, with addition to the $10028 to replace the engine. This has been going on 34 days. I am trying to reach upper management from Shelor and waiting on GM to get back with us. So far it looks like we have to buy a new engine. Looks like the next truck will not be a Gm or anything from Shelor. They sold us the warranty too. Is it worth going to small claims court? I apologize for the bad grammar. I am a little angry. Any helpful suggestions will be appreciated. I usually would not call out companies or employee’s name but this is completely ridiculous .

  • 3 weeks later...
Posted
On 3/26/2024 at 1:42 PM, Ckitch said:

Having the same issue on my 2019 Chevy Trail Boss with 80,000. My wife was driving to a doctors appointment , low oil light came on, shortly after that the message about pulling over. She pulled over at the first safe spot. Oil was all over the side of the truck and front of engine. Engine was blown. We had it towed to Shelor Motor Mile in Christiansburg Virginia. It took a week to have it looked at and have to be told that the extended warranty covered the oil cooler hose but have to tear the engine apart to see if the engine blew do to lack of oil for the oil cooler hose blowing. After a few more days Shelor called and said that the engine blowing was due to lack of oil but the only way the warranty place would fix it is if we had the receipts to all of our oil changes. I change my own oil most of the time and have no idea how to retrieve them from my bank statements. We called the warranty place (Costgaurd). They seemed great and said “No problem” they were going to send out their own inspector. A week later we get a call saying that they engine blew do to no oil in the engine and driving with no oil , along with poor maintenance. This is a total joke. Right now still fighting with GM, Shelor and the Costgaurd, trying to find a reasonable person to put 2 and 2 together. Plus Joe ( our representative from Shelor) is a horrible. It sometimes takes days to get back with us. He called my wife today and said it will cost another $1500 to move the truck out of the bay until we if out what we want to do, with addition to the $10028 to replace the engine. This has been going on 34 days. I am trying to reach upper management from Shelor and waiting on GM to get back with us. So far it looks like we have to buy a new engine. Looks like the next truck will not be a Gm or anything from Shelor. They sold us the warranty too. Is it worth going to small claims court? I apologize for the bad grammar. I am a little angry. Any helpful suggestions will be appreciated. I usually would not call out companies or employee’s name but this is completely ridiculous .Having the same issue on my 2019 Chevy Trail Boss with 80,000. My wife was driving to a doctors appointment , low oil light came on, shortly after that the message about pulling over. She pulled over at the first safe spot. Oil was all over the side of the truck and front of engine. Engine was blown. We had it towed to Shelor Motor Mile in Christiansburg Virginia. It took a week to have it looked at and have to be told that the extended warranty covered the oil cooler hose but have to tear the engine apart to see if the engine blew do to lack of oil for the oil cooler hose blowing. After a few more days Shelor called and said that the engine blowing was due to lack of oil but the only way the warranty place would fix it is if we had the receipts to all of our oil changes. I change my own oil most of the time and have no idea how to retrieve them from my bank statements. We called the warranty place (Costgaurd). They seemed great and said “No problem” they were going to send out their own inspector. A week later we get a call saying that they engine blew do to no oil in the engine and driving with no oil , along with poor maintenance. This is a total joke. Right now still fighting with GM, Shelor and the Costgaurd, trying to find a reasonable person to put 2 and 2 together. Plus Joe ( our representative from Shelor) is a horrible. It sometimes takes days to get back with us. He called my wife today and said it will cost another $1500 to move the truck out of the bay until we if out what we want to do, with addition to the $10028 to replace the engine. This has been going on 34 days. I am trying to reach upper management from Shelor and waiting on GM to get back with us. So far it looks like we have to buy a new engine. Looks like the next truck will not be a Gm or anything from Shelor. They sold us the warranty too. Is it worth going to small claims court? I apologize for the bad grammar. I am a little angry. Any helpful suggestions will be appreciated. I usually would not call out companies or employee’s name but this is completely ridiculous .

You can try emailing [email protected] they got back to me in a day. My trucks still down but gm is replacing the engine under warranty.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • How many miles were on the truck when you bought it and was there some form of oil change history generated through a dealer or an independent shop although not much would show up if the owner had changed their own oil. Just curious if it was a maintenance issue or if there was something off from the start, surely one would think the original owner would have realized it was using a lot of oil, its hard to go back in time and find out the true story of mysteries like this. Well hopefully the warranty company will go for it and just install a new engine, that would be the ideal outcome.    I still have so few miles on my truck as per not quite 9000 and will be changing the oil shortly which has around 2700 miles on it or so and its down so little on the dipstick from where it was at the beginning of this oil change that I could make the "claim" that it uses no oil but in reality would be a very small amount, less than a 1/16 of an inch. Just driving empty/not towing and easy driving so hard to say what it would do if it had a load behind it for oil consumption. So far very impressed with the very minimal oil usage. 
    • I have a 2015 Silverado and sometimes I can not get in to the truck. I use the key to unlock the driver door. Something is locking the truck when I unlock it, last night I left the truck open and this morning it was locked with the mirrors folded in. This happens while driving so it is now a safety issue. I reach down for the folding button and they open, then they close again.  Any advice, thank you,   Ed
    • Did you ever find a resolution to this? my 2019 Silverado 1500 is showing the exact same headlights issues with the exact same symptoms.  would help a ton if anyone has any advice on this or better yet a known solution..
    • Wawa and Meijer here have ethanol free (88 & 89) I use for my mower and lawn equipment.  Its not much more than reg.  I paid $3.29 a few weeks ago.  
    • tl; dr I've now reached the 6th floor of hell. I'm chronicling my journey for my morning readers.   Pulling the top of the intake apart was moderately easy but it involved a lot of parts, connections, and minutae. I was preparing for the new fuel lines to arrive ("nut and bolt kit" it's called). The fuel line connections are notched and held in place by the manifold and a metal plate with a T27 screw.   It's on the back of the intake, under the firewall, with little clearance, and two hard metal fuel lines in the way. I was using Franken-tools (weird combinations of 1/4 inch ratchet with/without an extension, with a bit holder for my T27) to get in there. One of my sockets and bits fell off and has yet to emerge on the floor. I lost a second setup and that's when I almost started throwing tools. But that was the point at which I had gotten traction on the Torx head, and it promptly stripped. No more traction.   I started humming "1-877-kars-4-kids" because I was about at that point. You know what? I'm $1500 into this thing and I can make it disappear just as quickly. This isn't fun anymore. I had spent a lot of time already "tidying" around the engine bay: Fixing all the "someone's been here before!" BS. The truck has been exclusively dealer- and shop- serviced and I'm reminded of why I never let other people work on my cars unless absolutely necessary.   Speaking of dealer service. This truck has a 1" stack of records going back to 1995. I put them all in an excel spreadsheet, date/mileage/description.   The CPI spider has been replaced 4 times in 85k miles. The EGR? Another 4. Multiple, multiple O2 sensors. One Cat. 4? Sets of plugs and wires, and I swear half the stack is diagnosis paperwork for "misfire, runs rough, extended crank, dies at stoplights".   GM was producing some proper crap back then. And it was still well within the era of brittle/crappy plastic. (Windows 95 was released the same month this truck was sold new, we HAD the technology!!)   There (was) a plastic shroud around the evaporator core and HVAC fan in the engine bay. I noticed a chunk of it missing so I poked at it some more and it literally shattered. Touched it some more and pieces were crumbling off. Had a good laugh. Clearly whatever plastic garbage they were using had broken down over 30 years and was literally turning to dust. That was a good half hour of using a shop vac to remove the rest of it.   Back to it.   I was going to give up for the evening but then decided I'm already level 10 pissed off at the stripped screw: G* D* it, give me my tools back -- and my JOY. We'll do this the hard way: The whole intake is coming off.   Blazer won Round II. After finally finding and accessing the 12 intake bolts and using a pry bar to unseat it from the heads, it popped loose in an explosion of gunk and grime raining down into open ports. Awesome.   6 times I reminded myself: Be careful of the temperature sender on the front of the intake.   YEAH, I forgot again and snapped it clean off in the removal. Add another $20 to the ever-growing list of new parts this thing is consuming.   The shame is, long before removing the intake, I had changed the oil in prep for Tuesday's momentous fuel line replacement that was going to be the magic fix and I'd have a running Blazer to tool around in this next weekend. The intake removal, including raining gunk, also gushed dirty coolant all over the valley. Of course it did. Welp, there goes another $35.   I now need an intake gasket set, bolt set, coolant temp sensor, another 5 quarts of oil, some RTV. Don't worry, I've already got 3 new jugs of Dexcool and a thermostat waiting. I'll fill it with clean water first to get it running, dump it, and then add the Dex later on in case... well, let's not go there. I'm only tearing this down once, next time the truck is going on Marketplace for FREE.   Oh, and I'm going to need vacuum hose for all the stupid connections placed at the rear of the engine which have since disintegrated. Come on, GM....tell me you don't do that anymore?   Oh, and the ears on the distributor where the cap screws down are both cracked. I mean, why not put a new distributor in it too. You get a distributor, YOU get a distributor, Everyone gets a new distributor!   This truck isn't out of the woods yet...I'm already questioning how much more time I'm willing to sink in.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...