Jump to content

Recommended Posts

Posted

I'm getting a set of these for free, anyone actually have a washer diameter to center the caliper?

  • 2 weeks later...
Posted
On 6/8/2019 at 1:21 PM, ModJunky said:

Testing the water to see if anyone is interested in purchasing front brake upgrade for 2014-2018 silverado 1/2 ton trucks or Suv. i have a source to acquire like new loaded calipers and the new rotors to make it happen and have the proper spacing requirements to make them work on your truck. I have already done this mod to my 2014 silverado and can tell you it is a very noticeable upgrade from what the oem had to offer in those years as well as a more appealing look all together. Both front calipers loaded with pads and hardware and front rotors 500.00 plus shipping to the lower 48 states. This is a drop in the bucket compared to the thousands it cost to get the Brembo upgrade through GM. message me if your interestedIMG_3009.thumb.JPG.69a69a511f6efc69c2e19ac8da7d8fc3.JPG

available? 

  • 11 months later...
Posted

Does anybody have a current set of part numbers for these calipers?  It seems like every video, thread post, or website has different GM part numbers for these.  This is what I've come up with for a list of PNs, but virtually none of them list as current and in stock:

 Delco PN 13545383 (front left), can't find right

Left as 172-2282 and right as 172-2283

13536579 & 13536580

148806-02906924 (left) 148806-02372500 (right)

13530411 and 13530412

 

Anybody actually order a set of these recently?

Posted

also looking at doing this upgrade, i have a 2015 silverado with factory 18s, just wanna see if these clear the rim without grinding

  • 1 year later...
Posted
On 7/12/2022 at 1:25 PM, Jim85IROC said:

Does anybody have a current set of part numbers for these calipers?  It seems like every video, thread post, or website has different GM part numbers for these.  This is what I've come up with for a list of PNs, but virtually none of them list as current and in stock:

 Delco PN 13545383 (front left), can't find right

Left as 172-2282 and right as 172-2283

13536579 & 13536580

148806-02906924 (left) 148806-02372500 (right)

13530411 and 13530412

 

Anybody actually order a set of these recently?

Did you ever figure this out?  The thread died a few months back...

Posted

If anyone is curious about doing this, check out rock auto for the prices. Super cheap for OEM parts too. I’ve been thinking about doing this. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,826
    Total Members
    8,960
    Most Online
    Tonwantonga
    Newest Member
    Tonwantonga
    Joined
  • Who's Online   4 Members, 1 Anonymous, 829 Guests (See full list)


  • Latest Articles

  • Posts

    • What I think you're saying is there is supply here at home, and in Venezuela, and we could ease pricing if only it were favorable to do so.   Well, yes?   But that's not the current market. Supply isn't what could someday exist, if only, it's what producers are willing to produce and sell at a certain price point.   The national price of single family homes would come way down if we'd just slap together a few million homes this summer.   RAM and GPUs would get a lot cheaper if we just set up some factories to produce a bunch more and stopped using it to build out AI data centers.    
    • The turn signal/multifunction switch is faulty.  I've seen a few of these go bad at work.  
    • I am experiecing the same issue, I have gone in the setting and disabled rain sensing function but I am still experiencing this. Whe i use my turn signal they will redomly turn on. Sometime they stay on and others times we swipe 2 or 3 times and stop. Its super anoying, escpecially after a fresh wash. Anyone have any advice? . rain-sensing function, but I am still experiencing this issue Sometimes they stay on, and other times we swipe 2 or 3 times and stop.It's super annoying, especially after a fresh wash.When I use my turn signal, they will randomly turn on. I am experiencing the same issue. I have gone into the settings and disabled the rain sensing function, but I am still experiencing this.
    • If we actually used any significant amount of that source in the USA then I'd agree but we don't. We've had that discussion before. We drill and pump more than we use. Thing is, we sell. We export. Gas and Crude. It's more profitable so any shortage here is self inflicted and LEGAL.    I worked a gas plant that has multiple fuel sources available and I worked in the furnace and boiler plant in that facility. I'd had days we swapped fuel types four times in a twelve hour shift which isn't done on supply but on margin. Two of the fuel sources are internally generated. Tail gas and DAK, both of which are sold as well a consumed. We always had more than we needed to run the process but we chose the fuel that produced the best margin not bought at the cheapest price always. A good bit of math to that and back in the time that was done on a slide rule.     I worked the Shale Oil Semiworks of Chevron Research and CONOCO Research in Salt Lake City. That process never went into production although it was very successful. Why? Did we lack oil bearing shale? Nope. Price of crude never made the margins work. That was in the late 70's early 80's. Remember history? What was happening then was a reaction to that situation. It didn't drive it. If so then it's easy. This isn't a supply and demand thing. This is a profit and margin thing and AI rules that now.    In no refining situation that I was ever in would a bomb hitting a well anywhere in the world 'instantly' interrupt or even distress the supply. Most plants have more than a months worth of crude in the tank field and more in pumping stations. That yo-yo could play out over days, weeks and maybe months and have zero impact on plant operations. How many times has this been off and on in the last few months? These people and not stupid. These plants measure down time in hundreds of thousands of dollars per day. They are not sucking fumes or waiting on the next truckload with baited breath. Besides, as I noted, they are for the most part 'vertically integrated'. They own it from the dirt is sits in to the delivery rack and sometimes to the pump. It has a HUGE shock absorber built in. When production suffers, refining wins and when refining is winning exploration is killing. The rest of that crap in the news is a 'news cycle'. Government dipping in to reserves? Oil is stealing their milk money. There's a reason Chevron abandon Venezuela infrastructure and it had nothing to do with security of US citizens. Nationals run those plants. it has to do with MARGINS disappearing to corruption. They are in no hurry to return. Is there supply there? Oh yea. More than enough to offset what is bought in the middle east. Just isn't ???? Profitable.    We have supply. There are places in Illinois you can drive a pipe into the ground and run your homes natural gas furnace on it.    A refinery fire will gum up the supply works but not a localized war where the market is using a limited supply from. Now Europe, that's something other....
    • $4.00 a gallon here now.   Diesel nearly $5.00 again.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...