Jump to content

Recommended Posts

Posted

Very excited to share this! BCM Programming, finally done!

 

Special thanks to WAMS - www.whiteautoandmedia.com

 

- Hyperflash Deleted

- Turn Signal Indicator Failure Deleted

- Remote Start increased to 20 Minutes

- Remote Start enables (for trucks that don’t bVe remote start)

- Fog Lights stay on with High Beams (and have FULL control)

- Fog Lights stay on with Intellibeam/Auto High Beam (if equipped)

- Tap to Pass (Turn Signal Activation) increased from 3 blinks to 4 blinks

- Key Fob - Front Windows Roll Down, Driver (and Passenger for SUVs) will Roll up on key fob lock

- Key Fob - All Windows Roll Down (for trucks not equipped)

- Heated Seat enable (for trucks that didn’t come equipped with heated seats)

- 98MPH Speed Limiter increased

 

 

 

Sent from my iPhone using Tapatalk

  • Like 6
  • Thanks 2
Posted

Phil your the man are you making a express up harness for the passenger side ?

  • Like 2
Posted
Phil your the man are you making a express up harness for the passenger side [emoji848]

Yes. Working on it.

35f31dec23c904bdcdc4a7b1a50f94d9.jpg


Sent from my iPhone using Tapatalk
  • Like 5
  • Thanks 1
Posted

So does this work with 2014? Do I get a new bcm or do i mail my bcm for the upgrade?

My last question, would this upgrade also allow me to use the keyless touch pad entry device that's available for 2016 models and up?

Sent from my Pixel 2 XL using Tapatalk

Posted

Curious, once those changes are made are they permanent? 

 

What happens if I take my truck into the dealer and they do an “update” on the BCM? Does it retain the changes that WAM did?

 

Regards,

 

rog

 

 

  • Like 1
Posted
So does this work with 2014? Do I get a new bcm or do i mail my bcm for the upgrade?

My last question, would this upgrade also allow me to use the keyless touch pad entry device that's available for 2016 models and up?

Sent from my Pixel 2 XL using Tapatalk




You would mail your BCM in.

Keyless touchpad entry?




Sent from my iPhone using Tapatalk
Posted
Curious, once those changes are made are they permanent? 
 
What happens if I take my truck into the dealer and they do an “update” on the BCM? Does it retain the changes that WAM did?
 
Regards,
 
rog
 
 

Generally, whatever is updated on the BCM usually only applies to what is updated. But I’ll defer to@GTPPrix for that.


Sent from my iPhone using Tapatalk
Posted
14 minutes ago, pgamboa said:


Generally, whatever is updated on the BCM usually only applies to what is updated. But I’ll defer to@GTPPrix for that.


Sent from my iPhone using Tapatalk

Good question! So part of this service is to make sure you have the absolute latest updated available software and calibrations for your build. That being said K2 development has been frozen for some time so unless something REALLY big happens (like a recall for example) the chances in this are very very slim; you'd be more likely to have a BCM go bad and be replaced. I can honestly say this happens so infrequently its not even a statistic with the thousands of various modules out there that we service. 

 

If something like that were to happen we would redo your unit on the house. 

  • Like 3
Posted
20 hours ago, Rock1500 said:

Got it. What is the normal turn around?

I asked the same question he answered in this thread.

 

Posted
On 7/25/2019 at 5:04 PM, pgamboa said:


Yes. Working on it.

35f31dec23c904bdcdc4a7b1a50f94d9.jpg


Sent from my iPhone using Tapatalk

I never even knew I wanted this until now!

Posted
On 7/27/2019 at 9:37 AM, Dutchy said:

I never even knew I wanted this until now!

I always knew I wanted it, I just dont want to do the work hehehe 

  • 5 years later...
Posted

 

On 7/25/2019 at 10:41 PM, pgamboa said:

 

Very excited to share this! BCM Programming, finally done!

 

Special thanks to WAMS - www.whiteautoandmedia.com

 

- Hyperflash Deleted

- Turn Signal Indicator Failure Deleted

- Remote Start increased to 20 Minutes

- Remote Start enables (for trucks that don’t bVe remote start)

- Fog Lights stay on with High Beams (and have FULL control)

- Fog Lights stay on with Intellibeam/Auto High Beam (if equipped)

- Tap to Pass (Turn Signal Activation) increased from 3 blinks to 4 blinks

- Key Fob - Front Windows Roll Down, Driver (and Passenger for SUVs) will Roll up on key fob lock

- Key Fob - All Windows Roll Down (for trucks not equipped)

- Heated Seat enable (for trucks that didn’t come equipped with heated seats)

- 98MPH Speed Limiter increased

 

 

 

 

Sent from my iPhone using Tapatalk


When will it be available again??

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • Based on what I can tell, yes.   As for updating it, its a mixed bag.  Updates do fix a lot of issues, but occasionally can create some oddities.  They do more good than harm though overall.     Here's what the most current one does and a  V171 Improvements Important: Improvements will vary by model, build configuration, system, and sales region. Not all vehicles have all features. OnStar and Wi-Fi may not work after remote start CarPlay may not automatically reconnect Part of the Driver Attention messaging screen may be in English even though the language is set to something else XM may not work After a dead 12V the radio may set to Arabic at each startup Bluetooth contacts might not be able to sync with the vehicle During an OTA the 12V battery may drain Customer might see a screen telling them to return to the dealer After changing the Wi-Fi SSID or password a device may not disconnect If a device is connected on the 2.4Ghz band, nothing will connect to the 5Ghz one, which could show as slow Wi-Fi speeds Customers might have noticed Wi-Fi dropping in certain areas and reconnecting later Customer might see the top of the screen blinking during Android Auto Android Auto may not connect CarPlay audio might momentarily cut out The "Add Phone" button may be grayed out The radio may not start up   V167 Most Notable Improvements:   Outside Air Temperature is incorrect. -You may see a popup message for Engine Shift. (Corvette Only) After changing the exhaust sound they get a popup that "mode change not applied", even though it was. -When changing volume, the volume bar is for Traffic instead of Audio. -(Corvette Only) Improvements to the placement of buttons and text. -If the customer receives the message "Apple CarPlay Could not connect", the cursor might move in the opposite direction than expected when using the control knob. -Android Auto automatically starts playing their music, even though they have turned that off in settings. -Intermittently they have a red OnStar LED with no OnStar function and/or no audio. -The minimum length of the Wi-Fi password was increased to 12 characters. -The popup message "Driver Attention Check, check your mirrors or Super Cruise will shut down" may not have come up on the display when it should have. -Startup animation added for 20th anniversary of the V-Series on Cadillacs. -The Navigation app received location improvements when going under long underpasses. -In the Navigation app there are filters for charging points that the vehicle cannot use.   V164 Most Notable Improvements Most notable improvements contained in this release may include: Apps Intermittently, an “SD Card Removed” message will pop up in the Navigation app. While in the audio app, the radio may stop working. Trailer Tire Pressure sensors may not be learned in the Trailer app. Not being able to return to the home screen while in the Camera app. After an ignition cycle, the radio might go to a black screen or stop working if using Sirius XM. Spotify icon truncated on Audio app.   SXM When changing power modes with the ignition switch, the HVAC pop up might appear. During startup, the radio will show the brand splash screen then go blank. Receiving a confirmation pop-up when changing drive modes. A “Return to Dealer” message may appear on the radio screen. SuperCruise setting toggle may not work. System After an ignition cycle, the radio might go black or stop working if using Sirius XM (SXM). Settings When performing a factory reset, the radio may stop working. After performing a factory reset, the radio may stop working when trying to switch users. When trying to go into the Language section quickly after startup, the radio may stop working. Projection Wireless CarPlay cannot be connected after unpairing another wireless Android Auto device. When the Android Auto screen comes up to connect wirelessly, the screen may freeze if the Cancel button is pressed. Removed the Apple CarPlay Cannot Connect screen when a device fails to pair during the autoconnect process. CarPlay information may not show up in the audio app. Near Field Communications (NFC) chime may be heard when NFC does not work. The Cannot Connect screen does not pop up after the first connection on wireless CarPlay fails. Apple CarPlay is now functional in Guam. Over the Air (OTA) When a software update is cancelled, the downloading logo may still be displayed. Energy When using the Energy app, the radio may stop working. When plugging in the vehicle, the display might show “Now” instead of “Charging Upon Plug In.” Instrument Cluster Voice recognition can be started while on an OnStar or phone call. When downloading contacts, there is a progress bar and circles on the Recents page of the cluster. The temperature on the cluster and the display may be different. After receiving and ending a call on the secondary paired phone, the cluster may get stuck on the phone menu. Bluetooth Intermittent Bluetooth connection loss.
    • Looking for help troubleshooting a metallic like front end rattle. Figured I’d see if anyone had thoughts before I schedule an appointment with the dealer.   The rattle is fairly loud and occurs primarily when the front driver side wheel hits a bump, even fairly minor road seams. Sometimes does it when the passenger hits a bump but I don’t believe when the rear hits. Rattle still occurs when foot is pressing brake peddle so I think that rules out the caliper rattle I’ve read about. I’ve also checked the running boards and they are tight.   Most noticeable at slow speeds.    Any insight is appreciated. 
    • We try to make cruise the coast. It’s where our favorite casino is. I only want to spectate. Never took a car. Always had one to take. I belonged to a club once. Even when I used to drag raced. It was during test and tune. Probably because I’m not a night owl, party person. 
    • We had a pretty big cars and coffee in Indy this past weekend.  Pretty much anything and everything was there.  
    • Good looking Olds, and TRX!   I haven't been into car shows either. I'm probably not a convert but I did push myself this year to attend a few select events to challenge some assumptions and try to experience car-based social clubs in a different way. I joined up with the local Hagerty group for some cars/coffee events, group drives. A month ago I showed my '94 Camaro I rescued last fall at Radwood. Had a good time, but, there was some sitting around with the car and that's the part of shows I don't enjoy as much. I prefer to be a spectator, walk the show, grab a burger, go home.   Radwood was the only era-limited event, but where it had strict model year limitations, it made it up in variety. Having Jason Camissa there was also a hoot.   Where I see old 50's car shows, doo-wop and winga dinga music stuff fading out, same with "only" vintage muscle clubs, it seems to be the activity-based clubs/events which are gaining strong popularity. Places where all cars and interests come together.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...