Jump to content

Recommended Posts

Posted

Just got an update to the 805.1, completed successfully (yea right).  Turn on radio and no sound, switch over to Sirius and I have sound.  Go back to both AM and FM - no sound.  Anyone have this and get it resolved?? 

Posted

That is a new one. One problem has been no sound from the  complete system. Having the AM / FM not working but the XM is new. Try leaving the vehicle off for a couple of hours.

That seemed to take care of the problem with the complete sound system failure. You might try to update the system again just to see if it did complete successfully.

  • Like 1
Posted

Thanks for the reply Richard, that is what I intended to try (and did).  24 hrs. or so later I tried it and it is working as it should again.  Even though it said it had completed updating, it was not.  Hope this helps someone else. ?

Posted

I have a different but somewhat similar issue.  Sometimes, not everyday, after startup and pulling out of the driveway I lose sound from FM radio.  Switch the station to another FM channel and I get sound back, change back to original station and sound is there still.  I suppose it could be the radio station but it seems to happen to frequently.  Almost half the mornings.  Sometimes happens after starting the car to come home from work as well.  Anybody else seen this?

Posted
17 hours ago, J2Jones said:

I have a different but somewhat similar issue.  Sometimes, not everyday, after startup and pulling out of the driveway I lose sound from FM radio.  Switch the station to another FM channel and I get sound back, change back to original station and sound is there still.  I suppose it could be the radio station but it seems to happen to frequently.  Almost half the mornings.  Sometimes happens after starting the car to come home from work as well.  Anybody else seen this?

May not be the same problem but some have experienced a delay in several control entities such as Audio / Nav due to the unit either booting up and/or connecting to the network with Wifi/Onstar. I have started my vehicle and I have had no audio until I pull out on to the roadway. Some vehicles I believe just take more time to establish the operating mode for the driver.

Posted

Put me in, coach, I'm ready to play!  Same damn issue here.  Worked great yesterday, just so happened to have an hour ride to the airport today, and no audio the whole ride.  I didn't even think to check for the updates status.  Just had the truck about two weeks, coming from the previous generation, theres still things I'm learning...

Posted
6 hours ago, SteveCZ said:

Put me in, coach, I'm ready to play!  Same damn issue here.  Worked great yesterday, just so happened to have an hour ride to the airport today, and no audio the whole ride.  I didn't even think to check for the updates status.  Just had the truck about two weeks, coming from the previous generation, theres still things I'm learning...

It is not what you want to hear but....Turn it off and let it sit for awhile and it should reset itself and operate.

Posted

So, reviving an old thread with an update.  After nearly a week of the truck sitting off in an airport garage, the radio MAGICALLY works now.  

  • 1 year later...
Posted

Just did the update 0n a 2019 silverado and it said completed however the radio has no sound the radio will sometimes go blank and not turn on for hours hope the update fixes this and sound comes back if problem persist I will trade to Ford after being a loyal GM customer for many years

  • 1 month later...
Posted

This happened to me this morning. Headed into work hope it works when I get back.

Sent from my SM-N986U using Tapatalk

  • 5 months later...
Posted

Just bought a 2021 Chevy Colorado.  Test drove a few so somehow managed to not try the radio before purchasing.  Drove off the lot and radio doesn't work.  No sound from AM, FM, Sirius or Bluetooth connection.  Will make chimes when changing settings so speakers do work.  Dealership has had it for a week and a half trying to resolve with no luck.  Replaced the radio and still no sound. GM says it is a programming issue and there is no timeline for when they might have a fix.  Anyone else experience this? 

Posted

I had no sound at all. Turned out to be the amp. Took 2 weeks for the dealer to replace it 

Posted

My 2021 7" infotainment does this once in a while. It actually did it yesterday when I went to leave for work. Luckily I just have to turn the truck off and lock the doors then wait a minute for the computer to shut down. Literally takes about 1 minute then restart the truck and the stereo works again. 

 

I am ready for my first oil change so I will have them perform the latest infotainment update that I have been hearing about. Hopefully that does fix this silly issue. 

  • 2 months later...
Posted

I have a 2021 Silverado 2500HD.  They have already replaced the infotainment center once and it is doing it again!  All sound just shuts off.  Last time it just didn’t come back on.   I heard there is a class action lawsuit but don’t know if my truck is part of it!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • On my wife's 2020 Blazer (~69000 miles), we started to notice the brakes pulsating at faster speeds. Typically around town you don't notice anything, but highway/interstate driving you will notice it. I decided to pull of the front tires and look at the brakes. I figured with the milage, the pads should be wearing out to their life span, but they actually looked decent. Still with "meat" on them. One pad has a ridge wearing in it, and that same rotor is showing the ridge too. That's not the concerning part...the other rotor appears to have a raised bump on it!  The picture make it look like a pimple! Very odd and strange! NOTE: These are the factory brakes and rotors.   I'm attaching pictures of the front brakes and what they look like ate ~69000 miles.
    • 2024 Chevrolet 2500 HD Custom 6.6 Gas Canadian built Truck  I tried to search for my previous thread on this topic but cant find it so my apoligies  for starting another one    #1   Since we have owned our truck purchased new it has this strange noise after using the remote start function  you press the remote start and you hear it start but right at the end of it starting it almost seems like it wants to start again after the truck is running .   There is no gap in time it is right at the end of the start . Almost sounds like when you have started a car/truck and its running and then you try and start it again and you get that grinding noise ,sort of     #2  You can only hear this if you are standing outside of the truck and near the truck  you cant hear it when you start the truck from inside  the cab . So it may very well be happening when starting the truck that way as in normally    #3   This only happens when it is started after sitting . For how long I don't know but it happens after sitting overnight for sure and it wont do it if you stop the engine after starting and then start it again  I have had it in to the Dealership before concerning this but they did not have the truck  when it was cold to hear it . Now its back in the Dealership left it overnight so they could possibly hear the problem . They said they tried and nothing happened . Well they did not know what they were listening for . I started the truck remotely and BINGO it makes the noise . Oh that sounds weird they say . We need to look into it ! I have left for this week at the Dealership    Does your 2024 2500 HD gas do this ?  Any of you fellas care to take the time and trouble to film this operation from a cold start  so I can hear what your sound like  Really  would like to know if this is anormal sound  Thank You Fellas !!
    • 2026 Z71.  The other day I was backing a trailer into the barn.  The alarm was going off just because the trailer was in the field of the warning sensors when you get too close to something.  For some reason now the warning alarm doesn't work anymore.  It used to go off when I was just normally backing my truck into garage.  I still have the guidelines in the back up camera.  Is there a button or something to push to turn the sound/Alarm on and off?  I have the touch screen in this truck.  There isn't a "P" on the dash except for the parking brake.  I can't find anything in the touch screen under settings or vehicle.  Thank you in advance.  
    • Well one of our most reliable vehicles was sold yesterday. The first and only I gave for free to a grandkid. If they got skin in the game they take care of it. My wife bought new. Five years later my daughter got it to use. We got it back and gave it to our grandson after graduation. He did zero maintenance just oil changes. When the AC quit he drove his mother’s car rather than get it fixed. Instead he just bought a beater and sold the Elantra. 
    • I usually do as well or better than the sticker for mileage. Usually better going west than east. North then South. Wind makes a difference. I’m not usually a conspiracy theorist. But it did dawn on me I’m going by the vehicle calculation. Now that would be interesting.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...