Jump to content

Recommended Posts

Posted

I bought a 2019 sierra 1500 and the air blows out of all vents no matter what mode I have it in. When it's cold out my feet seem to stay cold but my upper body is hot. I took it to the dealer and they said it is normal and they all do it.  I've heard about this issue with previous model gm trucks, but I couldnt find anything on the new generation trucks. Is anyone else having this issue or is it something specific to my truck? 

Posted

My 2019 Silverado rst does this. I asked and they said they all do it as well. I find it annoying because my windshield fogs up at times unless I use defogger


Sent from my iPhone using Tapatalk

Posted
1 hour ago, fishnfly20 said:

I bought a 2019 sierra 1500 and the air blows out of all vents no matter what mode I have it in. When it's cold out my feet seem to stay cold but my upper body is hot. I took it to the dealer and they said it is normal and they all do it.  I've heard about this issue with previous model gm trucks, but I couldnt find anything on the new generation trucks. Is anyone else having this issue or is it something specific to my truck? 

Yup, Totally lame as with AC always on too!  Anyway you have to turn Fan OFF and put on Recirculate and then your good to go!  

Posted
2 hours ago, mookdoc6 said:

Yup, Totally lame as with AC always on too!  Anyway you have to turn Fan OFF and put on Recirculate and then your good to 

I was hoping it was only a winter issue, because I dont care as much about ac blowing out all the vents. I guess that's an issue too. What do you mean by "turn fan off" turn it on auto?

Posted
1 hour ago, fishnfly20 said:

I was hoping it was only a winter issue, because I dont care as much about ac blowing out all the vents. I guess that's an issue too. What do you mean by "turn fan off" turn it on auto?

No...I had difficult time with it myself and still do..LOL  the Screen has to to say FAN OFF and then push in recirculate button ON.

Posted
On 1/22/2020 at 6:31 PM, fishnfly20 said:

I bought a 2019 sierra 1500 and the air blows out of all vents no matter what mode I have it in. When it's cold out my feet seem to stay cold but my upper body is hot. I took it to the dealer and they said it is normal and they all do it.  I've heard about this issue with previous model gm trucks, but I couldnt find anything on the new generation trucks. Is anyone else having this issue or is it something specific to my truck? 

Well I hate to disagree with your service advisor or whomever told you this but it's not "normal" and they all don't do it.  My '19 RST, our '19 Fire Dept. Custom service truck and a friends LT doesn't do it.  If the defrost only is selected air doesn't blow out the vents.  When the defrost mode is on and I select the vent mode, you can hear the flap inside the dash open then air starts flowing out the vents.  What gets me with these service dept.'s is when people bring a vehicle in for a problem or concern they seem to reply "they all do that" or "it's normal".  When they tell you that, tell him/her ok lets go try a handful of trucks on the lot and lets see what they do.  

Posted
On 1/22/2020 at 9:06 PM, mookdoc6 said:

Yup, Totally lame as with AC always on too!  Anyway you have to turn Fan OFF and put on Recirculate and then your good to go!  

The AC light doesn't mean the compressor is engaged.

Just means that it is available.

 

Humidity control is much more effective when the AC is used.

 

 

Posted

Yes, I get that my average humidity is 13-15% so I don't need "Humidity Control" and please explain how this "Humidity Control" is utilized without the AC Compressor running?

Posted

A quick update, the dealership mechanic put in a inquiry to GM and he said there was no fix for this issue. He said he would call me when they figure out a fix, which I expect will be never. I used the vents for the first time today and there is barely any air coming out of them, it doesnt seem right to me.

Posted

Nope not right. On vent mode air should be blowing hard. Something's stuck closed or not opening.  Did you try using the air settings from the infotainment screen intead of the console? Hope it gets figured out. Try another dealer.

  • 4 years later...
Posted

Yep, new 2024 does it also, was told by service the same thing”” “they all do it” except they forgot one thing……they have a lot full of other new trucks and NO they all don’t do it. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • No such thing as regenerative braking on a pure ICE vehicle.     Regenerative braking is the re-capture of energy from electric motors and stores it in the battery pack.  So hybrids, PHEV and EVs have regenerative braking.     What you are seeing is the charging system changing modes is all.  Its likely entering charge mode for some sort of reason is all.  All of the charging modes will be listed below.   As for L10 vs D.  L10 turns off automatic grade braking.  L10 puts you in control of grade downshifts where in D it will automatically do it based on brake pedal position and other factors.  Otherwise L10 and D drive exactly the same aside from that one aspect.    Battery Sulfation Mode The BCM will enter this mode when the interpreted Generator output voltage is less than 13.2 V for 45 minutes. When this condition exists the BCM will enter Charge Mode for 2–3 minutes. The BCM will then determine which mode to enter depending on voltage requirements.   Charge Mode The BCM will enter Charge Mode when ever one of the following conditions are met:   Windshield wipers are ON for more than 3 s. Climate Control Voltage Boost Mode Request is true, as sensed by the HVAC control module via serial data. High speed cooling fan, rear defogger, and HVAC high speed blower operation can cause the BCM to enter the Charge Mode. The estimated battery temperature is less than 0°C (32°F). Battery State of Charge is less than 80%. Vehicle speed is greater than 145 km/h (90 mph) A current sensor malfunction exists. System voltage is determined to be below 12.56 V When any one of these conditions is met, the system will set targeted generator output voltage to a charging voltage between 13.9–15.5 V, depending on the battery state of charge and estimated battery temperature.   Fuel Economy Mode The BCM will enter Fuel Economy Mode when the estimated battery temperature is at least 0°C (32°F) but less than or equal to 80°C (176°F), the calculated battery current is less than 15 A and greater than −8 A, and the battery state-of-charge is greater than or equal to 80%. Its targeted generator output voltage is the open circuit voltage of the battery and can be between 12.5–13.1 V. When fuel economy mode is active, the generator is not charging, only maintaining open circuit battery voltage. The BCM will exit this mode and enter Charge Mode when any of the conditions described above are present.   Headlamp Mode The BCM will enter Headlamp Mode when ever the head lamps are ON (high or low beams). Voltage will be regulated between 13.9–14.5 V.   Start Up Mode When the engine is started the BCM sets a targeted generator output voltage of 14.5 V for 30 s.   Tow/Haul Mode (if applicable) Pressing the Tow/Haul Mode button located on the center stack, the vehicle system voltage is raised and the remote (non-vehicle) battery will be charged. Having the headlamps on will raise the system voltage and if the Tow/Haul button is applied it will not serve any purpose. The voltage is regulated between 13.9-14.5 V.      
    • Hello from Australia Just sharing that there is now a way to delete the active shutters entirely with just a plug in module. Opens up tons of room to light bars etc.
    • I have an observation and a question... 1) I watch the voltage closely because I have had to dial in the cut-in/cut-out voltages of the battery separator to my camper.  The "smart" charging drives me nuts.  Anyway, I noticed that when coasting for a while, and especially if lightly using the brakes (though not necessary), the voltage goes up from mid/high-13 volts to mid/high-14 volts.  Then it drops back down after stopping or going again.  Consistently!   The only explanation I can come up with is REGENERATIVE BRAKING!  Well, maybe that's a little bit of an exaggeration, but it's certainly free extra battery charging.   2) Driving on mountain roads I will use L and vary the max gear.  Things straighten out and I end up in L10.  Sometimes I leave it there for a while.  Is there any difference between L10 and D?   
    • Do you think this width might affect the chalk test with a higher pressure closer to 65psi? I think lowering the pressure makes sense to get the tread to lay flatter
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...